{"product_id":"silicone-t-seal-profile-6mm-x-5-2mm-25m-coil","title":"Silicone T Seal Profile – 6mm x 5.2mm – 40 or 80 Shore A – 25m Coil","description":"\u003cp\u003eA solid silicone T seal with a broad, flat head 6mm wide and 2mm thick on a 3.2mm leg, 5.2mm tall overall. Push the leg into a slot about 3.0–3.2mm wide and the head sits flat on the surface, closing the gap against dust, splash, draughts and heat. It is a low-profile seal: the head stands only 2mm proud, so it suits doors and lids with little clearance. Choose a \u003cstrong\u003esoft 40 Shore A\u003c\/strong\u003e or a \u003cstrong\u003ehard 80 Shore A\u003c\/strong\u003e compound in the same profile, in seven colours, all at the same price. Each coil is one unbroken 25m length.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHead 6.0mm wide × 2.0mm thick; leg 3.2mm wide; 5.2mm overall height (3.2mm of leg below the head)\u003c\/li\u003e\n\u003cli\u003e1.4mm shoulder each side of the leg, so the head covers both slot edges\u003c\/li\u003e\n\u003cli\u003eTwo hardnesses in the identical profile: 40 Shore A (soft) or 80 Shore A (hard)\u003c\/li\u003e\n\u003cli\u003eSolid silicone rubber, working range -50°C to +180°C\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact. It is a WRAS approved material.\u003c\/li\u003e\n\u003cli\u003eBlack, white, translucent, red, green, blue or yellow, all at the same price\u003c\/li\u003e\n\u003cli\u003eHeld in stock in every colour and hardness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich hardness do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003e40 Shore A (soft)\u003c\/th\u003e\n\u003cth\u003e80 Shore A (hard)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeel\u003c\/td\u003e\n\u003ctd\u003eSoft and rubbery, squashes easily\u003c\/td\u003e\n\u003ctd\u003eFirm, close to a hard plastic trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClosing force\u003c\/td\u003e\n\u003ctd\u003eLow: seals under light, hand-closed lids\u003c\/td\u003e\n\u003ctd\u003eHigh: needs a latched or clamped door to compress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCopes with uneven gaps\u003c\/td\u003e\n\u003ctd\u003eBetter: conforms to warped or uneven faces\u003c\/td\u003e\n\u003ctd\u003eLess: best on flat, rigid faces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolds its shape \/ resists wear\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003ctd\u003eBetter: resists scuffing, cutting and being pushed out of the slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set (22 h at 175 °C)\u003c\/td\u003e\n\u003ctd\u003e36 %\u003c\/td\u003e\n\u003ctd\u003e78 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eSealing doors, lids and hatches against air, dust and splash\u003c\/td\u003e\n\u003ctd\u003eEdge trims, bumpers, glazing and wear strips where stiffness matters more than squash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf you are sealing a closing door or lid, the 40 Shore A version is usually the right choice. It needs less force and recovers better after long periods compressed.\u003c\/p\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSlot seals in machine guards, enclosures and aluminium profile frames\u003c\/li\u003e\n\u003cli\u003eLow-clearance access doors and inspection hatches on food, bakery and packaging machinery\u003c\/li\u003e\n\u003cli\u003eLids and doors on ovens, provers, warming cabinets and dryers up to +180°C\u003c\/li\u003e\n\u003cli\u003ePanel and glazing infill strips in slotted frames (80 Shore A)\u003c\/li\u003e\n\u003cli\u003eAir handling units, fan coil housings and ductwork panels\u003c\/li\u003e\n\u003cli\u003eOutdoor enclosures and marine hatches, where UV and ozone crack other rubbers\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (red, green, blue, yellow)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-6x5-2mm-technical-drawing.png?v=1795003014\" alt=\"Technical drawing of silicone T seal 6mm x 5.2mm: 6.0mm head width, 2.0mm head thickness, 3.2mm leg width, 5.2mm overall height, 40 or 80 Shore A\" width=\"1000\" height=\"1220\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003e40 Shore A\u003c\/th\u003e\n\u003cth\u003e80 Shore A\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"4\"\u003e\u003cstrong\u003eDimensions (identical for both hardnesses)\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSolid T section, square-cut flat head, centred leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e5.2 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead width\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e6.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead thickness\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg width (base thickness)\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3.2 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3.2 mm (reference, 5.2 − 2.0)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder each side\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.4 mm (reference, leg centred)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits slot\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eApprox. 3.0–3.2 mm wide, at least 3.2 mm deep\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"4\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40 Shore A\u003c\/td\u003e\n\u003ctd\u003e80 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.12 g\/cm³\u003c\/td\u003e\n\u003ctd\u003e1.20 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e9.6 N\/mm² (9.6 MPa)\u003c\/td\u003e\n\u003ctd\u003e10 N\/mm² (10 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e770 %\u003c\/td\u003e\n\u003ctd\u003e440 %\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e28 N\/mm (28 kN\/m)\u003c\/td\u003e\n\u003ctd\u003e28 N\/mm (28 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624, die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e36 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003e78 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1, type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e56 %\u003c\/td\u003e\n\u003ctd\u003e54 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"4\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"4\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight (calculated from 22.2 mm² section and density)\u003c\/td\u003e\n\u003ctd\u003eAbout 25 g per metre, 0.62 kg per coil\u003c\/td\u003e\n\u003ctd\u003eAbout 27 g per metre, 0.67 kg per coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1 coil of 25 m (£27.00 per metre inc VAT)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOur part numbers\u003c\/td\u003e\n\u003ctd\u003eIP-SITS-6X5.2-40-25M-\u0026lt;colour\u0026gt;\u003c\/td\u003e\n\u003ctd\u003eIP-SITS-6X5.2-80-25M-\u0026lt;colour\u0026gt;\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer makes in writing for this profile, in both hardnesses. Ask us if your file needs the certificate or declaration.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles in repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials that come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is accepted for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe approvals cover the material as supplied. Whether your finished assembly complies also depends on its design, its cleaning regime and the other materials in it, so check it against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my slot?\u003c\/h3\u003e\n\u003cp\u003eMeasure the slot's width and depth. The leg is 3.2mm wide, so it grips best in a slot of about 3.0–3.2mm. The slot should be at least 3.2mm deep so the head can sit down flat; a deeper slot is fine. The 80 Shore A leg is stiff, so it needs a slot close to 3.2mm; the soft 40 Shore A leg will squeeze into a slightly tighter one.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the length of every slot and allow about 5% for trimming and joints. For example, a 600mm × 400mm guard door needs 2.0m, or about 2.1m with the allowance, so one 25m coil seals 11 doors of that size.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear any old seal, grease and grit out of the slot, and let it dry\u003c\/li\u003e\n\u003cli\u003eStart partway along a straight side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a small plastic roller as you go. A drop of soapy water helps the 80 Shore A version slide in.\u003c\/li\u003e\n\u003cli\u003eLay the seal into corners rather than pulling it round them. Stretched silicone shrinks back and opens a gap.\u003c\/li\u003e\n\u003cli\u003eCut the end slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot does it fit?\u003c\/strong\u003e\u003cbr\u003eA slot about 3.0–3.2mm wide and at least 3.2mm deep. The head is 6mm wide, so it overlaps the slot by 1.4mm each side and covers the edges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 3.2mm leg goes into the slot, and the wider, flat head sits on the surface, facing the door, lid or panel it seals against.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the profile different between 40 and 80 Shore A?\u003c\/strong\u003e\u003cbr\u003eNo. Both have exactly the same 6mm × 5.2mm shape and dimensions. Only the compound changes: 40 Shore A is soft and squashes easily, 80 Shore A is firm and stiff.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used near ovens and heaters?\u003c\/strong\u003e\u003cbr\u003eBoth versions are rated to +180°C continuous. That suits oven and warming-cabinet doors, drying equipment and heater housings, as long as the seal itself stays at or below that temperature. It stays flexible down to -50°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. We can send the declaration if your audit needs it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe profile is extruded to ISO 3302-1 class E2, the normal tolerance class for extruded rubber sections. Check your slot against the drawing before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it flatten over time?\u003c\/strong\u003e\u003cbr\u003eThe 40 Shore A version has a compression set of 36% after 22 hours at 175°C, so it springs back well through repeated heat cycles. The 80 Shore A version measures 78% on the same test, so under constant hot compression it takes a set; use it where stiffness and wear resistance matter more than recovery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife or shears. To join it, use a silicone adhesive or silicone sealant; most general-purpose glues and contact adhesives will not bond to silicone rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs every colour and hardness the same price?\u003c\/strong\u003e\u003cbr\u003eYes. All 14 options cost £675.00 per 25m coil inc VAT (£27.00 per metre).\u003c\/p\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-5-5mm-x-4-5mm-25m-coil\"\u003eSilicone T Seal Profile – 5.5mm x 4.5mm (another low-profile T seal)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-5mm-x-5-9mm-25m-coil\"\u003eSilicone T Seal Profile – 5mm x 5.9mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-l-profile-6-2mm-x-5-2mm-25m-coil\"\u003eSilicone L Profile – 6.2mm x 5.2mm (for edges and corners rather than slots)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure it will fit? Send us a photo, or the width and depth of the slot, and we will check it for you. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"40 Shore A (soft) \/ Black","offer_id":56589404242299,"sku":"IP-SITS-6X5.2-40-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"40 Shore A (soft) \/ White","offer_id":56589404275067,"sku":"IP-SITS-6X5.2-40-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"40 Shore A (soft) \/ Translucent","offer_id":56589404307835,"sku":"IP-SITS-6X5.2-40-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"40 Shore A (soft) \/ Red","offer_id":56589404340603,"sku":"IP-SITS-6X5.2-40-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"40 Shore A (soft) \/ Green","offer_id":56589404373371,"sku":"IP-SITS-6X5.2-40-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"40 Shore A (soft) \/ Blue","offer_id":56589404406139,"sku":"IP-SITS-6X5.2-40-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"40 Shore A (soft) \/ Yellow","offer_id":56589404438907,"sku":"IP-SITS-6X5.2-40-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"80 Shore A (hard) \/ Black","offer_id":56589404471675,"sku":"IP-SITS-6X5.2-80-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"80 Shore A (hard) \/ White","offer_id":56589404504443,"sku":"IP-SITS-6X5.2-80-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"80 Shore A (hard) \/ Translucent","offer_id":56589404537211,"sku":"IP-SITS-6X5.2-80-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"80 Shore A (hard) \/ Red","offer_id":56589404569979,"sku":"IP-SITS-6X5.2-80-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"80 Shore A (hard) \/ Green","offer_id":56589404602747,"sku":"IP-SITS-6X5.2-80-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"80 Shore A (hard) \/ Blue","offer_id":56589404635515,"sku":"IP-SITS-6X5.2-80-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"80 Shore A (hard) \/ Yellow","offer_id":56589404668283,"sku":"IP-SITS-6X5.2-80-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-6x5-2mm-black.png?v=1795003015","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-6mm-x-5-2mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}