{"product_id":"silicone-t-seal-profile-7mm-x-10mm-25m-coil","title":"Silicone T Seal Profile – 7mm x 10mm – 50 Shore A – 25m Coil","description":"\u003cp\u003eA deep, soft push-fit seal for a 3.5mm slot. This silicone T seal profile is a solid 7mm x 10mm extrusion with a \u003cstrong\u003esquare head 7mm wide and 4mm deep\u003c\/strong\u003e on a \u003cstrong\u003esturdy 3.5mm wide, 6mm long leg\u003c\/strong\u003e. The leg pushes into a slot of around 3.2–3.5mm and grips along its full depth, while the 4mm head stands well proud of the frame and gives the closing face a full 7mm contact band, with 1.75mm shoulders covering the frame either side. At \u003cstrong\u003e50 Shore A\u003c\/strong\u003e it is softer than the usual 60 Shore A silicone, so the deep head takes up uneven gaps with light closing force. Supplied as one continuous 25m coil in seven colours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e£675.00 inc VAT per 25m coil, which is £27.00 per metre.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSquare head 7mm wide and 4mm deep, square edges, 1.75mm shoulder each side of the leg\u003c\/li\u003e\n\u003cli\u003eLeg 3.5mm wide and 6mm long: a push fit in a slot about 3.2–3.5mm wide and at least 6mm deep\u003c\/li\u003e\n\u003cli\u003eOverall height 10mm; the head stands 4mm proud of the frame before compression, so it bridges larger and less even gaps than low-head T seals\u003c\/li\u003e\n\u003cli\u003eSoft solid silicone, 50 Shore A, with 640% elongation, 12 N\/mm² tensile strength and 58% rebound\u003c\/li\u003e\n\u003cli\u003eWorks from -50°C to +180°C without hardening or going brittle\u003c\/li\u003e\n\u003cli\u003eFood-contact compound (FDA 21 CFR 177.2600 and EC 1935\/2004) and WRAS approved material\u003c\/li\u003e\n\u003cli\u003e25m coil in black, white, translucent, red, green, blue or yellow, all the same price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachine guards, cabinet doors and enclosure lids with a 3–3.5mm routed or extruded perimeter slot\u003c\/li\u003e\n\u003cli\u003eLids and inspection hatches on food processing, packaging and brewing equipment\u003c\/li\u003e\n\u003cli\u003eOven, proving cabinet and drying room doors where the closing gap varies along the frame\u003c\/li\u003e\n\u003cli\u003eHVAC access panels, duct inspection doors and heated enclosures\u003c\/li\u003e\n\u003cli\u003eHatch, window and trim seals on marine and vehicle bodywork\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (blue, green, yellow, red)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-7x10mm-technical-drawing.png\" alt=\"Technical drawing of silicone T seal 7mm x 10mm cross-section: head 7 x 4mm, leg 3.5mm wide, 10mm overall, dimensions in mm\" width=\"1000\" height=\"1220\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section, square-edged head, straight leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (head)\u003c\/td\u003e\n\u003ctd\u003e7.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead depth\u003c\/td\u003e\n\u003ctd\u003e4.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg (base) width\u003c\/td\u003e\n\u003ctd\u003e3.5 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e6.0 mm (reference, 10.0 − 4.0)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder overhang each side\u003c\/td\u003e\n\u003ctd\u003e1.75 mm (reference, (7.0 − 3.5) ÷ 2)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuggested slot\u003c\/td\u003e\n\u003ctd\u003eAbout 3.2–3.5 mm wide, at least 6 mm deep\u003c\/td\u003e\n\u003ctd\u003eGuidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e50 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e12 N\/mm² (12 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e640 %\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e27 N\/mm\u003c\/td\u003e\n\u003ctd\u003eASTM D624 B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e34 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1 Type B, Method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e58 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow (same profile and price)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate coil weight\u003c\/td\u003e\n\u003ctd\u003e1.4 kg (calculated from cross-section area 49 mm² and density)\u003c\/td\u003e\n\u003ctd\u003eCalculated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance claims\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer states for this exact profile and compound. Ask us for the certificate or declaration you need for your technical file.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles intended for repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials intended to come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is listed as suitable for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eApprovals apply to the material as supplied. Whether a finished assembly complies also depends on your design, cleaning regime and other materials, so check against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my groove?\u003c\/h3\u003e\n\u003cp\u003eThis profile is made for a \u003cstrong\u003estraight-sided slot\u003c\/strong\u003e about 3.2–3.5mm wide and at least 6mm deep. At 50 Shore A the 3.5mm leg squeezes slightly into a slot a touch under 3.5mm and grips along its full 6mm length. In a slot that is exactly 3.5mm or a little wider, add a thin bead of silicone adhesive along the bottom. If your slot is shallower than 6mm the head will not seat flat; trim the leg or choose a shorter profile. The frame needs at least 2mm of flat land either side of the slot for the shoulders to sit on.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-7x10mm-installation.png\" alt=\"Installation section: silicone T seal 7mm x 10mm with its 3.5mm leg pushed 6mm into a frame slot, square head standing 4mm proud under a closing lid\" width=\"1000\" height=\"1100\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure every slot and add about 5% for trimming and joints. Example: a cabinet door with a 600mm x 450mm groove needs 2.1m, so one 25m coil does about 11 doors with allowance.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean old seal and debris out of the slot and let it dry\u003c\/li\u003e\n\u003cli\u003eStart in the middle of a long side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a plastic roller until the shoulders sit flat on the frame along the whole run\u003c\/li\u003e\n\u003cli\u003eDo not stretch the seal as you go: stretched silicone shrinks back and opens gaps at the joints\u003c\/li\u003e\n\u003cli\u003eCut slightly long with a sharp knife or shears and push the ends together for a tight butt joint; a dab of silicone adhesive keeps it closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 3.5mm leg goes into the slot. The flat 7mm face of the head faces outwards, towards the door, lid or panel that closes onto it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big a gap does it close?\u003c\/strong\u003e\u003cbr\u003eThe head stands 4mm proud of the frame. As a guide for a soft 50 Shore A seal, design for about 25–35% squeeze of the head: a closed gap of roughly 2.6–3mm between the frame and the closing face. The deep head also copes with gaps that vary along the frame better than a shallow-headed seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot size do I need?\u003c\/strong\u003e\u003cbr\u003eA straight slot about 3.2–3.5mm wide and at least 6mm deep, with at least 2mm of flat frame either side. Check your slot against the drawing before ordering, or send us the dimensions and we will check it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it different from the 6.5mm x 9.5mm T seal?\u003c\/strong\u003e\u003cbr\u003eBoth are the same soft 50 Shore A compound with a 4mm deep head. This one is slightly larger all round: a 7mm head instead of 6.5mm, 10mm tall instead of 9.5mm, and a thicker 3.5mm leg (instead of 2.5mm) for a wider 3.2–3.5mm slot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs 50 Shore A soft or hard?\u003c\/strong\u003e\u003cbr\u003eIt is on the soft side of medium: noticeably softer than the common 60 Shore A silicone grade. It seals with light closing force and recovers well (58% rebound, 34% compression set after 22 hours at 175°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it survive heat?\u003c\/strong\u003e\u003cbr\u003eIt is rated from -50°C to +180°C, so it suits ovens, warming cabinets, dryers and machinery that runs hot, as well as cold stores.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eYes. The compound is stated to meet FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. Ask for the certificate if your audit needs it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut square with a sharp knife or shears. Butt the ends together and bond with a silicone adhesive. For crisp corners, mitre and bond them rather than bending the seal round a tight radius; the deep head can ripple on very tight bends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tight are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe profile is extruded to ISO 3302-1 class E2, a standard tolerance class for extruded rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I order a shorter length or a different colour mix?\u003c\/strong\u003e\u003cbr\u003eThis listing is a full 25m coil in one colour. For cut lengths, mixed colours or larger quantities, contact us for a quote.\u003c\/p\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-6-5mm-x-9-5mm-25m-coil\"\u003eSilicone T Seal Profile – 6.5mm x 9.5mm (same soft compound, slimmer 2.5mm leg)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-5mm-x-10mm-25m-coil\"\u003eSilicone T Seal Profile – 5mm x 10mm (same height, narrower 5mm head)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-7mm-x-4-5mm-25m-coil\"\u003eSilicone T Seal Profile – 7mm x 4.5mm (same head width, much lower profile)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure this profile matches your slot? Send us a photo or the slot dimensions and we will check it. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56590657749371,"sku":"IP-SITS-7X10-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56590657782139,"sku":"IP-SITS-7X10-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56590657814907,"sku":"IP-SITS-7X10-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56590657847675,"sku":"IP-SITS-7X10-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56590657880443,"sku":"IP-SITS-7X10-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56590657913211,"sku":"IP-SITS-7X10-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56590657945979,"sku":"IP-SITS-7X10-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-7x10mm-black.png?v=1795078311","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-7mm-x-10mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}