{"product_id":"silicone-t-seal-profile-7mm-x-4-5mm-25m-coil","title":"Silicone T Seal Profile – 7mm x 4.5mm – 25m Coil","description":"\u003cp\u003eA wide, sturdy push-fit seal for slots too wide for a thin-legged T seal. This silicone T seal profile is a solid 7mm x 4.5mm extrusion with a \u003cstrong\u003esquare-edged flat head\u003c\/strong\u003e (7mm wide, 2mm deep) on a \u003cstrong\u003ebroad 4.2mm leg\u003c\/strong\u003e. Press the leg into a slot about 4mm wide and the head stands 2mm proud, giving the closing door, lid or panel a full 7mm contact band, while the shoulders cover 1.4mm of frame either side. At \u003cstrong\u003e60 Shore A\u003c\/strong\u003e it is a medium-soft silicone that seals with modest closing force and recovers well after compression. Supplied as one continuous 25m coil in seven colours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e£675.00 inc VAT per 25m coil, which is £27.00 per metre.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat head 7mm wide and 2mm deep, square edges, 1.4mm shoulder each side of the leg\u003c\/li\u003e\n\u003cli\u003eWide 4.2mm leg, 2.5mm long: a push fit in a slot about 3.9–4.2mm wide and at least 2.5mm deep\u003c\/li\u003e\n\u003cli\u003eOverall height only 4.5mm for low-clearance frames; the head stands 2mm proud before compression\u003c\/li\u003e\n\u003cli\u003eMedium-soft solid silicone, 60 Shore A, with 550% elongation, 59% rebound and 31% compression set (22 h at 175°C)\u003c\/li\u003e\n\u003cli\u003eWorks from -50°C to +180°C without hardening or going brittle\u003c\/li\u003e\n\u003cli\u003eFood-contact compound (FDA 21 CFR 177.2600 and EC 1935\/2004) and WRAS approved material\u003c\/li\u003e\n\u003cli\u003e25m coil in black, white, translucent, red, green, blue or yellow, all the same price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLids, guards and inspection hatches on food processing, packaging and brewing equipment\u003c\/li\u003e\n\u003cli\u003eOven, proving cabinet and drying room doors with a 4mm seal slot\u003c\/li\u003e\n\u003cli\u003eHVAC access panels, duct inspection doors and heated enclosures\u003c\/li\u003e\n\u003cli\u003eReplacement seals where an old, wider slot has worn too loose for a thin-legged profile\u003c\/li\u003e\n\u003cli\u003eHatch, window and trim seals on marine and vehicle bodywork\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (blue, green, yellow, red)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-7x4-5mm-technical-drawing.png\" alt=\"Technical drawing of silicone T seal 7mm x 4.5mm cross-section with all dimensions in mm\" width=\"1000\" height=\"1220\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section, flat square-edged head, straight wide leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (head)\u003c\/td\u003e\n\u003ctd\u003e7.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead depth\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg (base) width\u003c\/td\u003e\n\u003ctd\u003e4.2 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e2.5 mm (reference, 4.5 − 2.0)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder overhang each side\u003c\/td\u003e\n\u003ctd\u003e1.4 mm (reference, (7.0 − 4.2) ÷ 2)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuggested slot\u003c\/td\u003e\n\u003ctd\u003eAbout 3.9–4.2 mm wide, at least 2.5 mm deep\u003c\/td\u003e\n\u003ctd\u003eGuidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550 %\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm\u003c\/td\u003e\n\u003ctd\u003eASTM D624 B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1 Type B, Method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow (same profile and price)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate weight\u003c\/td\u003e\n\u003ctd\u003eAbout 0.7 kg of rubber per 25 m coil (calculated from section area and density)\u003c\/td\u003e\n\u003ctd\u003eCalculated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance claims\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer states for this exact profile and compound. Ask us for the certificate or declaration you need for your technical file.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles intended for repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials intended to come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is listed as suitable for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eApprovals apply to the material as supplied. Whether a finished assembly complies also depends on your design, cleaning regime and other materials, so check against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my groove?\u003c\/h3\u003e\n\u003cp\u003eThis profile is made for a \u003cstrong\u003estraight-sided slot about 3.9–4.2mm wide\u003c\/strong\u003e and at least 2.5mm deep. The 60 Shore A compound squeezes into a slot slightly narrower than the 4.2mm leg for a firm grip; much below 3.8mm it becomes hard to push home. In a slot the same width as the leg or slightly wider, add a thin bead of silicone adhesive along the bottom. The 7mm head overhangs the slot by 1.4mm on each side, so the frame needs at least that much flat land either side of the slot for the shoulders to sit on.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-7x4-5mm-installation.png\" alt=\"Installation section: silicone T seal 7mm x 4.5mm with its 4.2 mm leg pushed into a frame slot, flat head standing 2 mm proud under a closing lid\" width=\"1000\" height=\"1100\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure every slot and add about 5% for trimming and joints. Example: a cabinet door with a 600mm x 450mm groove needs 2.1m, so one 25m coil does about 11 doors with allowance.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean old seal and debris out of the slot and let it dry\u003c\/li\u003e\n\u003cli\u003eStart in the middle of a long side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a plastic roller until the shoulders sit flat on the frame\u003c\/li\u003e\n\u003cli\u003eDo not stretch the seal as you go: stretched silicone shrinks back and opens gaps at the joints\u003c\/li\u003e\n\u003cli\u003eCut slightly long with a sharp knife or shears and push the ends together for a tight butt joint; a dab of silicone adhesive keeps it closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 4.2mm leg goes into the slot. The flat 7mm face of the head faces outwards, towards the door, lid or panel that closes onto it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big a gap does it close?\u003c\/strong\u003e\u003cbr\u003eThe head stands 2mm proud of the frame. As a guide for a 60 Shore A silicone, design for about 20–30% squeeze of the head: a closed gap of roughly 1.4–1.6mm between the frame and the closing face. For a larger or uneven gap, choose a taller profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot size do I need?\u003c\/strong\u003e\u003cbr\u003eA straight slot about 3.9–4.2mm wide and at least 2.5mm deep, with at least 1.4mm of flat frame either side. Check your slot against the drawing before ordering, or send us the dimensions and we will check it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it different from the 6mm x 4.5mm T seal?\u003c\/strong\u003e\u003cbr\u003eBoth are 4.5mm tall with a flat head, but this one has a 7mm head, a much wider 4.2mm leg and a softer 60 Shore A compound (the 6mm x 4.5mm is 80 Shore A with a 2mm leg). Choose this one for wider slots and lower closing force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy 60 Shore A?\u003c\/strong\u003e\u003cbr\u003eIt is a medium-soft grade: soft enough to seal with modest closing force and to grip in the slot, firm enough to keep its square edges. Its compression set of 31% after 22 hours at 175°C means it recovers well on doors that are opened and closed while hot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it survive heat?\u003c\/strong\u003e\u003cbr\u003eIt is rated from -50°C to +180°C, so it suits ovens, warming cabinets, dryers and machinery that runs hot, as well as cold stores.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eYes. The compound is stated to meet FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. Ask for the certificate if your audit needs it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut square with a sharp knife or shears. Butt the ends together and bond with a silicone adhesive. With a 4.2mm leg the profile is stiff in the plane of the head, so mitre and bond tight corners rather than bending it round them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tight are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe profile is extruded to ISO 3302-1 class E2, a standard tolerance class for extruded rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I order a shorter length or a different colour mix?\u003c\/strong\u003e\u003cbr\u003eThis listing is a full 25m coil in one colour. For cut lengths, mixed colours or larger quantities, contact us for a quote.\u003c\/p\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-6mm-x-4-5mm-25m-coil\"\u003eSilicone T Seal Profile – 6mm x 4.5mm (same height, 2mm leg, 80 Shore A)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-7-5mm-x-6-5mm-25m-coil\"\u003eSilicone T Seal Profile – 7.5mm x 6.5mm (wider head, taller profile)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-6-4mm-x-7mm-25m-coil\"\u003eSilicone T Seal Profile – 6.4mm x 7mm (deeper leg for deeper slots)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure this profile matches your slot? Send us a photo or the slot dimensions and we will check it. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56590235271547,"sku":"IP-SITS-7X4.5-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56590235304315,"sku":"IP-SITS-7X4.5-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56590235337083,"sku":"IP-SITS-7X4.5-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56590235369851,"sku":"IP-SITS-7X4.5-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56590235402619,"sku":"IP-SITS-7X4.5-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56590235435387,"sku":"IP-SITS-7X4.5-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56590235468155,"sku":"IP-SITS-7X4.5-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-7x4-5mm-black.png?v=1795045182","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-7mm-x-4-5mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}