{"product_id":"silicone-t-seal-profile-7mm-x-9mm-25m-coil","title":"Silicone T Seal Profile – 7mm x 9mm – 60 Shore A – 25m Coil","description":"\u003cp\u003eA solid silicone T seal with a flat head 7mm wide and 3mm thick, on a 3mm wide leg. It is 9mm tall overall. The leg pushes 6mm deep into a slot about 2.6–3.0mm wide and holds the seal in place without glue. The head sits flat on the surface and closes the gap against dust, splash, draughts and heat. It is made in a medium \u003cstrong\u003e60 Shore A\u003c\/strong\u003e silicone with a low compression set, so it squeezes under a closing door and springs back time after time, even when hot. It comes in seven colours, all at the same price. Each coil is one unbroken 25m length.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHead 7.0mm wide × 3.0mm thick; leg 3.0mm wide; 9.0mm overall height (6.0mm of leg below the head)\u003c\/li\u003e\n\u003cli\u003e2.0mm shoulder each side of the leg, so the head covers both edges of the slot\u003c\/li\u003e\n\u003cli\u003eMedium 60 Shore A silicone: flexible enough to seal under light door pressure, firm enough to stay in the slot\u003c\/li\u003e\n\u003cli\u003eLow compression set (31% after 22 h at 175°C), so it keeps sealing on hot, repeatedly closed doors\u003c\/li\u003e\n\u003cli\u003eWorking range -50°C to +180°C\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact. It is a WRAS approved material.\u003c\/li\u003e\n\u003cli\u003eBlack, white, translucent, red, green, blue or yellow, all at the same price\u003c\/li\u003e\n\u003cli\u003eHeld in stock in every colour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOven, prover, dryer and steam cabinet doors up to +180°C\u003c\/li\u003e\n\u003cli\u003eInspection hatches and guard doors on food, bakery and packaging machinery\u003c\/li\u003e\n\u003cli\u003eSlot seals in machine guards, enclosures and aluminium profile frames\u003c\/li\u003e\n\u003cli\u003eAir handling units, fan coil housings and ductwork access panels\u003c\/li\u003e\n\u003cli\u003eOutdoor enclosures and marine hatches, where UV and ozone crack other rubbers\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (red, green, blue, yellow)\u003c\/li\u003e\n\u003cli\u003eTranslucent or white seals where black marks on light surfaces must be avoided\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-7x9mm-technical-drawing.png?v=1795078113\" alt=\"Technical drawing of silicone T seal 7mm x 9mm: 7.0mm head width, 3.0mm head thickness, 3.0mm leg width, 9.0mm overall height, 60 Shore A\" width=\"1000\" height=\"1220\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section, square-cut flat head, centred leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e9.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead width\u003c\/td\u003e\n\u003ctd\u003e7.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead thickness\u003c\/td\u003e\n\u003ctd\u003e3.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg width (base thickness)\u003c\/td\u003e\n\u003ctd\u003e3.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e6.0 mm (reference, 9.0 − 3.0)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder each side\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (reference, leg centred)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits slot\u003c\/td\u003e\n\u003ctd\u003eApprox. 2.6–3.0 mm wide, at least 6.0 mm deep\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550 %\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm (26 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624, die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1, type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight (calculated from the 39 mm² section and the density)\u003c\/td\u003e\n\u003ctd\u003eAbout 45 g per metre, 1.1 kg per coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre inc VAT)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOur part numbers\u003c\/td\u003e\n\u003ctd\u003eIP-SITS-7X9-25M-\u0026lt;colour\u0026gt; (BLK, WHT, TRN, RED, GRN, BLU, YEL)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer makes in writing for this profile. Ask us if your file needs the certificate or declaration.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles in repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials that come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is accepted for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe approvals cover the material as supplied. Whether your finished assembly complies also depends on its design, its cleaning regime and the other materials in it, so check it against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my slot?\u003c\/h3\u003e\n\u003cp\u003eMeasure the slot's width and depth. The leg is 3.0mm wide, so it grips best in a slot of about 2.6–3.0mm; the 60 Shore A silicone squeezes in slightly to hold itself. The slot should be at least 6.0mm deep so the head can sit down flat; a deeper slot is fine. If your slot is wider than 3.0mm the leg will be loose, so bed it in silicone sealant or choose a T seal with a thicker leg.\u003c\/p\u003e\n\u003ch3\u003eWhy 60 Shore A?\u003c\/h3\u003e\n\u003cp\u003e60 Shore A is a medium hardness, about like a car tyre tread. It is soft enough for the 3mm head to compress under a closing door and fill small gaps, but firm enough that the leg grips and the head does not roll over. Its compression set of 31% (22 h at 175°C) is low for silicone, so it recovers well after long periods clamped shut at high heat. That makes it a better choice than a hard 80 Shore A seal for oven, prover and steam cabinet doors.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the length of every slot and allow about 5% for trimming and joints. For example, a 600mm × 400mm oven door needs 2.0m, or about 2.1m with the allowance, so one 25m coil seals 11 doors of that size.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear any old seal, grease and grit out of the slot, and let it dry\u003c\/li\u003e\n\u003cli\u003eStart partway along a straight side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a small plastic roller as you go. Do not stretch the seal while fitting, or it will shrink back and open a gap at the joint.\u003c\/li\u003e\n\u003cli\u003eAt tight corners, cut a small V-notch out of the head so it lies flat\u003c\/li\u003e\n\u003cli\u003eCut the end slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot does it fit?\u003c\/strong\u003e\u003cbr\u003eA slot about 2.6–3.0mm wide and at least 6.0mm deep. The head is 7mm wide, so it overlaps the slot by 2.0mm each side and covers the edges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 3mm leg goes into the slot, and the wider, flat head sits on the surface, facing the door, lid or panel it seals against.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far does the head stand proud?\u003c\/strong\u003e\u003cbr\u003e3mm. Set the closed door so it squeezes the head by roughly 0.5–1mm for a good seal without overloading it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used on ovens and heaters?\u003c\/strong\u003e\u003cbr\u003eYes. It is rated to +180°C continuous and stays flexible down to -50°C. Its low compression set means it keeps springing back on oven and dryer doors that are closed hot, day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. We can send the declaration if your audit needs it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe profile is extruded to ISO 3302-1 class E2, the normal tolerance class for extruded rubber sections. Check your slot against the drawing before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife or shears. To join it, use a silicone adhesive or silicone sealant. Most general-purpose glues and contact adhesives will not bond to silicone rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs every colour the same price?\u003c\/strong\u003e\u003cbr\u003eYes. All 7 colours cost £675.00 per 25m coil inc VAT (£27.00 per metre).\u003c\/p\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-6-7mm-x-9mm-25m-coil\"\u003eSilicone T Seal Profile – 6.7mm x 9mm (same 3mm leg, hard 80 Shore A for wiper and cover strips)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-7mm-x-4-5mm-25m-coil\"\u003eSilicone T Seal Profile – 7mm x 4.5mm (same 7mm head, short wide leg for shallow slots)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-9mm-x-14mm-25m-coil\"\u003eSilicone T Seal Profile – 9mm x 14mm (wider head, deeper slot)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure it will fit? Send us a photo, or the width and depth of the slot, and we will check it for you. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56590644773243,"sku":"IP-SITS-7X9-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56590644806011,"sku":"IP-SITS-7X9-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56590644838779,"sku":"IP-SITS-7X9-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56590644871547,"sku":"IP-SITS-7X9-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56590644904315,"sku":"IP-SITS-7X9-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56590644937083,"sku":"IP-SITS-7X9-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56590644969851,"sku":"IP-SITS-7X9-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-7x9mm-black.png?v=1795078114","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-7mm-x-9mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}