{"product_id":"silicone-t-seal-profile-9mm-x-8mm-25m-coil","title":"Silicone T Seal Profile – 9mm x 8mm, Barbed Push-In Leg – 60 Shore A – 25m Coil","description":"\u003cp\u003eA wide-headed silicone T seal with a barbed push-in leg. The flat head is 9mm wide and 2.7mm thick, so it gives a broad, soft sealing face. Under the head, a short 2.16mm neck leads into a 4mm long barb that swells to about 3.7mm and then closes to a flat 2.16mm tip. Push the tip into a slot and the barb squeezes in and locks behind the slot walls. The profile is 8mm tall overall. It is made in a medium \u003cstrong\u003e60 Shore A\u003c\/strong\u003e silicone with low compression set, rated from -50°C to +180°C, in seven colours at one price. Each coil is one unbroken 25m length.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHead 9mm wide × 2.7mm thick, flat on both faces\u003c\/li\u003e\n\u003cli\u003eBarbed leg 5.3mm long below the head: 2.16mm neck, a 4mm barb about 3.7mm at its widest, and a flat 2.16mm tip\u003c\/li\u003e\n\u003cli\u003e8mm overall height\u003c\/li\u003e\n\u003cli\u003eAbout 3.4mm of head each side of the leg, so the head covers both edges of the slot\u003c\/li\u003e\n\u003cli\u003e60 Shore A silicone with a 31% compression set (22 h at 175°C): it springs back well after long clamping at heat\u003c\/li\u003e\n\u003cli\u003eWorking range -50°C to +180°C\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact. It is a WRAS approved material.\u003c\/li\u003e\n\u003cli\u003eBlack, white, translucent, red, green, blue or yellow, all at the same price\u003c\/li\u003e\n\u003cli\u003eHeld in stock in every colour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOven, prover and dryer doors with a slot in the frame, up to +180°C\u003c\/li\u003e\n\u003cli\u003eInspection hatches and covers on food, bakery and brewing equipment\u003c\/li\u003e\n\u003cli\u003eHeating enclosures, furnace panels and temperature-controlled ducting\u003c\/li\u003e\n\u003cli\u003eControl cabinet, enclosure and machine-guard doors\u003c\/li\u003e\n\u003cli\u003eMarine and outdoor hatches and window frames, where UV and ozone crack other rubbers\u003c\/li\u003e\n\u003cli\u003eElectronics bays and trim joints in vehicles and plant\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (red, green, blue, yellow)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-9x8mm-technical-drawing.png?v=1795130680\" alt=\"Technical drawing of silicone T seal 9mm x 8mm: 9 x 2.7mm head, 2.16mm neck, 4mm barb about 3.7mm wide, flat 2.16mm tip, 8mm overall, 60 Shore A\" width=\"1000\" height=\"1200\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section: flat head, centred barbed leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead width\u003c\/td\u003e\n\u003ctd\u003e9 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead thickness\u003c\/td\u003e\n\u003ctd\u003e2.7 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e5.3 mm (reference, 8 − 2.7)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarb length (to tip)\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeck length\u003c\/td\u003e\n\u003ctd\u003e1.3 mm (reference, 8 − 2.7 − 4)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip width (base thickness)\u003c\/td\u003e\n\u003ctd\u003e2.16 mm, flat\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeck width\u003c\/td\u003e\n\u003ctd\u003eAbout 2.16 mm (scaled from the drawing)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarb width at widest point\u003c\/td\u003e\n\u003ctd\u003eAbout 3.7 mm (scaled from the drawing)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead overhang each side\u003c\/td\u003e\n\u003ctd\u003eAbout 3.4 mm (reference, leg centred)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits slot (our guidance)\u003c\/td\u003e\n\u003ctd\u003eApprox. 2.5–3.0 mm wide, at least 6 mm deep\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550 %\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm (26 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624, die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1, type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight (calculated from the ≈39 mm² section and the density)\u003c\/td\u003e\n\u003ctd\u003eAbout 45 g per metre, 1.1 kg per coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre inc VAT)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOur part numbers\u003c\/td\u003e\n\u003ctd\u003eIP-SITS-9X8-25M-\u0026lt;colour\u0026gt; (BLK, WHT, TRN, RED, GRN, BLU, YEL)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer makes in writing for this profile. Ask us if your file needs the certificate or declaration.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles in repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials that come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is accepted for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe approvals cover the material as supplied. Whether your finished assembly complies also depends on its design, its cleaning regime and the other materials in it, so check it against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my slot?\u003c\/h3\u003e\n\u003cp\u003eMeasure the slot's width and depth. The barb is about 3.7mm at its widest, so it needs a slot narrower than that to grip: about 2.5–3.0mm suits it. The tip and neck are 2.16mm, so the leg starts easily and the barb squeezes in behind. The slot should be at least 6mm deep, so the 5.3mm leg goes fully in and the head sits flat on the surface. In a slot narrower than about 2.2mm the barb will be hard to push home; in one wider than about 3.3mm it will not grip, so choose a different T seal. These slot sizes are our guidance from the geometry, not a manufacturer figure, so try a short length first.\u003c\/p\u003e\n\u003ch3\u003eWhy 60 Shore A?\u003c\/h3\u003e\n\u003cp\u003e60 Shore A is a medium silicone, about as firm as a car tyre tread. It is soft enough for the 2.7mm thick head to compress and close a gap, and firm enough for the barb to hold in its slot. Its compression set is low: 31% after 22 hours at 175°C. That means it recovers well when a door clamps on it at heat for long periods, which suits oven and prover doors.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the length of every slot and allow about 5% for trimming and joints. For example, a 600mm × 400mm door needs 2.0m, or about 2.1m with the allowance, so one 25m coil seals 11 doors of that size.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear any old seal, grease and grit out of the slot, and let it dry\u003c\/li\u003e\n\u003cli\u003eStart partway along a straight side, not at a corner\u003c\/li\u003e\n\u003cli\u003eLine the flat tip up with the slot and press the head down with your thumb or a small plastic roller as you go, until the barb clicks home and the head sits flat. A drop of soapy water helps it slide in.\u003c\/li\u003e\n\u003cli\u003eAt tight corners, cut a small V-notch out of the head so it lies flat\u003c\/li\u003e\n\u003cli\u003eCut the end slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot does it fit?\u003c\/strong\u003e\u003cbr\u003eA slot about 2.5–3.0mm wide and at least 6mm deep (our guidance). The head is 9mm wide, so it overlaps the slot by about 3mm each side and hides the edges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe barbed leg goes into the slot, flat tip first. The flat 9mm head sits on the surface and faces the door, lid or panel it seals against.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far does it stand proud?\u003c\/strong\u003e\u003cbr\u003e2.7mm, the thickness of the head. Set the door so it compresses the head by about a quarter to a third of that, roughly 0.7–0.9mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it without a slot?\u003c\/strong\u003e\u003cbr\u003eThe barbed leg is made to lock in a slot. On a flat surface, choose a self-adhesive or flat strip seal instead, or ask us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used on ovens and heaters?\u003c\/strong\u003e\u003cbr\u003eYes. It is rated to +180°C continuous and stays flexible down to -50°C. Its low compression set means it keeps sealing on doors that clamp shut at heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. We can send the declaration if your audit needs it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe profile is extruded to ISO 3302-1 class E2, the normal tolerance class for extruded rubber sections. Check your slot against the drawing before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife or shears. To join it, use a silicone adhesive or silicone sealant. Most general-purpose glues and contact adhesives will not bond to silicone rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs every colour the same price?\u003c\/strong\u003e\u003cbr\u003eYes. All 7 colours cost £675.00 per 25m coil inc VAT (£27.00 per metre).\u003c\/p\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-9mm-x-14mm-25m-coil\"\u003eSilicone T Seal Profile – 9mm x 14mm (same head width, longer leg)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-7mm-x-9mm-25m-coil\"\u003eSilicone T Seal Profile – 7mm x 9mm (narrower head, 60 Shore A)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-5mm-x-9mm-2-5mm-head-25m-coil\"\u003eSilicone T Seal Profile – 5mm x 9mm (slim head, 60 Shore A)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure it will fit? Send us a photo, or the width and depth of the slot, and we will check it for you. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56592243097979,"sku":"IP-SITS-9X8-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56592243130747,"sku":"IP-SITS-9X8-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56592243163515,"sku":"IP-SITS-9X8-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56592243196283,"sku":"IP-SITS-9X8-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56592243229051,"sku":"IP-SITS-9X8-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56592243261819,"sku":"IP-SITS-9X8-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56592243294587,"sku":"IP-SITS-9X8-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-9x8mm-black.png?v=1795130681","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-9mm-x-8mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}