{"product_id":"silicone-t-section-seal-10mm-x-10mm-25m-roll","title":"Silicone T Seal 10mm x 10mm – Soft 30 Shore A, 10 x 5mm Head, 5mm Leg – 25m Coil","description":"\u003cp\u003eA solid silicone T seal with a 10mm wide by 5mm deep head on a centred 5mm wide, 5mm long leg: 10mm tall overall. The leg pushes into a slot or panel joint and the head lies flat over the gap, giving a flush, flexible seal. Made in a very soft 30 Shore A compound, so it compresses easily into slightly undersized slots and recovers when released. Supplied as one continuous 25m coil in seven colours, held in stock.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e T section, 10mm wide x 10mm high; head 10 x 5mm, leg 5 x 5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e solid silicone rubber, soft 30 Shore A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e -50°C to +180°C working range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood and water:\u003c\/strong\u003e FDA 21 CFR 177.2600, EC 1935\/2004, WRAS approved\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e black, white, translucent, red, green, blue, yellow (same price)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25m coil, £675.00 inc VAT (£27.00 per metre inc VAT)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-10x10mm-technical-drawing.png?v=1795299210\" alt=\"Technical drawing: silicone T seal 10 x 10 mm cross-section, 10 x 5 mm head on a 5 mm wide x 5 mm long leg, dimensions in mm\" width=\"2000\" height=\"2400\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension above comes from the manufacturer's datasheet. Values in brackets are derived (leg length 10 − 5 = 5mm; shoulder each side (10 − 5) ÷ 2 = 2.5mm).\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSolid T section, leg centred\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (head)\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eDatasheet drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eDatasheet drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead depth (supplier: \"base thickness\")\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003ctd\u003eDatasheet drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg width\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003ctd\u003eDatasheet drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length (derived)\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003ctd\u003e10 − 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder each side of leg (derived)\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003ctd\u003e(10 − 5) ÷ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section area (derived)\u003c\/td\u003e\n\u003ctd\u003e75 mm²\u003c\/td\u003e\n\u003ctd\u003e50 + 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil length\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight per coil (derived)\u003c\/td\u003e\n\u003ctd\u003e≈ 2.1 kg\u003c\/td\u003e\n\u003ctd\u003e75 mm² x 25 m x 1.10 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eSilicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e30° Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.10 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 N\/mm² (10 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e910 %\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e28 N\/mm (28 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D 624 B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set, 22 h at 175°C\u003c\/td\u003e\n\u003ctd\u003e20 %\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1 Type B Method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e58 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50°C to +180°C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003eManufacturer statement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eAll material values are the manufacturer's figures for this profile's 30 Shore A compound. \"Derived\" rows are our arithmetic from those figures.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer states in writing, for this product:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA 21 CFR 177.2600\u003c\/strong\u003e: rubber articles intended for repeated food contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC 1935\/2004\u003c\/strong\u003e: EU framework regulation for food-contact materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWRAS approved\u003c\/strong\u003e material, for use with drinking (potable) water\u003c\/li\u003e\n\u003cli\u003eFree from TSE\/BSE animal by-products\u003c\/li\u003e\n\u003cli\u003eFree from phthalates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003csmall\u003eOnly approvals the manufacturer states in text for this product are listed. Ask us for the declaration of conformity if you need it for an audit.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoint seal between stainless or painted steel panels on food lines and catering units\u003c\/li\u003e\n\u003cli\u003eSlot seal on oven, furnace, HVAC and heating enclosure panels up to +180°C\u003c\/li\u003e\n\u003cli\u003eInfill strip for T-slots and grooves in machine guards and enclosures\u003c\/li\u003e\n\u003cli\u003eWeather seal on hatches, frames and structural joints (UV and ozone resistant)\u003c\/li\u003e\n\u003cli\u003ePotable water and brewery equipment where WRAS approval is needed\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for food-safety zoning (blue, red, green, yellow)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSizing and fitting\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOur guidance (not a manufacturer figure):\u003c\/strong\u003e for a push fit, use a slot about 4–4.5mm wide and at least 5mm deep, so the soft 5mm leg is lightly squeezed and the head sits flat. A 5mm slot gives a free fit; add silicone adhesive to hold it. The 10mm head covers a gap up to about 5mm wide with 2.5mm of overlap each side.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eClean and dry the slot or joint.\u003c\/li\u003e\n\u003cli\u003eMeasure the run and cut the seal square with a sharp knife or shears. Allow 1–2% extra; soft silicone can stretch while fitting.\u003c\/li\u003e\n\u003cli\u003eFor a permanent fix, run a thin bead of silicone adhesive or RTV sealant into the slot.\u003c\/li\u003e\n\u003cli\u003eStart at one end and press the leg fully home without pulling the strip tight, then smooth the head flat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the length of every joint and allow about 2% for trimming. Eight 2.4m panel joints = 19.2m + 0.4m = 19.6m, so one 25m coil covers it. A 40m job needs two coils.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size slot does the 10mm x 10mm T seal fit?\u003c\/strong\u003e\u003cbr\u003eThe leg is 5mm wide and 5mm long. A slot 4–4.5mm wide and at least 5mm deep gives a firm push fit in this soft 30 Shore A silicone. That is our fitting guidance, not a manufacturer tolerance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fit it?\u003c\/strong\u003e\u003cbr\u003ePress the leg into the slot by hand or with a plastic roller, working from one end, then smooth the head flat. Do not stretch the strip as you go. Add silicone adhesive in the slot for a permanent seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut with a sharp knife or shears on a cutting board; a mitre block helps at corners. Join ends or mitres with a silicone adhesive or RTV silicone sealant. General-purpose superglues do not bond silicone well without a primer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe for food and drinking water?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer states it meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact and is a WRAS approved material for potable water. It is also free from phthalates and TSE\/BSE by-products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperature can it take?\u003c\/strong\u003e\u003cbr\u003eIt works continuously from -50°C to +180°C. Compression set is 20% after 22 hours at 175°C, so it keeps sealing on hot panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow soft is 30 Shore A?\u003c\/strong\u003e\u003cbr\u003eVery soft, a little firmer than a pencil eraser. It squeezes into undersized slots and seals uneven gaps well. If you need a stiffer infill that resists being pushed out, choose a 60 Shore A T seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same profile in every colour?\u003c\/strong\u003e\u003cbr\u003eYes. All seven colours use the same 10 x 10mm profile and the same 30 Shore A compound, at the same price. Blue, red, green and yellow are often used for food-safety colour coding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock and how long is the coil?\u003c\/strong\u003e\u003cbr\u003eIt is held in stock and sold as one continuous 25m coil. Need a different length or a large quantity? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e or call +44 1282 277786.\u003c\/p\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-l-profile-10mm-x-10mm-60-shore-a-25m-coil\"\u003eSilicone L Profile – 10mm x 10mm, Heavy 5mm Wall\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-9mm-x-14mm-25m-coil\"\u003eSilicone T Seal – 9mm x 14mm, 25m Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/high-temperature-silicone-p-profile-seal-40mm-x-20mm-10m-roll\"\u003eHigh-Temperature Silicone P-Profile Seal – 40mm x 20mm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56582644924795,"sku":"IP-SITS-10X10-25M-BLACK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56582644957563,"sku":"IP-SITS-10X10-25M-WHITE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56582644990331,"sku":"IP-SITS-10X10-25M-TRANS","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56582645023099,"sku":"IP-SITS-10X10-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56582645055867,"sku":"IP-SITS-10X10-25M-GREEN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56582645088635,"sku":"IP-SITS-10X10-25M-BLUE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56582645121403,"sku":"IP-SITS-10X10-25M-YELLOW","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-section-seal-10mm-x-10mm-25m-roll-in-use.jpg?v=1794857186","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-section-seal-10mm-x-10mm-25m-roll","provider":"Industrial-polymers ","version":"1.0","type":"link"}