{"product_id":"solid-epdm-p-extrusion-19mm-x-3-5mm-per-metre","title":"Solid EPDM P Extrusion – 19mm x 3.5mm Bead, Tapered Tail – Black – 14m to 30m Coil","description":"\u003cp\u003eA slim P seal in \u003cstrong\u003esolid black EPDM rubber\u003c\/strong\u003e: a solid Ø3.5 mm round bead with a 16 mm tail that tapers to a 1 mm rounded tip, 19 mm wide overall. Bond or fix the tail to a frame, rebate or panel edge and the bead closes small, even gaps on doors, windows, hatches and glazing. It also works as a neat cushioning edge trim. Choose a cut length from 14 m to 29 m in one continuous piece, or a full 30 m coil at a much lower price per metre. Held in stock for fast dispatch.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 19 mm wide × 3.5 mm high; Ø3.5 mm solid bead; 16 mm tail tapering to 1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e solid (dense, non-sponge) EPDM, 65–75° Shore A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e −40 °C to +90 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e no ozone cracking in the manufacturer's 72-hour ozone test; suits indoor and outdoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e adhesive along the tail, or a mechanical fixing or retaining strip over the tail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 kg per metre, so it adds almost nothing to a lightweight door or panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e 14 m to 29 m cut lengths in one piece (£14.85\/m), or a 30 m full coil (£10.69\/m, the best value from 22 m upwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/solid-epdm-p-extrusion-19mm-x-3-5mm-technical-drawing.png?v=1795314068\" alt=\"Technical drawing of the solid EPDM P extrusion 19 x 3.5 mm: 19 mm overall width, solid 3.5 mm bead, 16 mm tail tapering to a 1 mm tip, with Industrial Polymers contact details\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest condition \/ method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eP section: solid round bead with a tapered flat tail\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e19.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (bead diameter)\u003c\/td\u003e\n\u003ctd\u003e3.5 mm (Ø3.5 mm solid bead)\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTail length\u003c\/td\u003e\n\u003ctd\u003e16.0 mm (bead to tail tip)\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTail thickness at tip\u003c\/td\u003e\n\u003ctd\u003e1.0 mm, rounded\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTail form\u003c\/td\u003e\n\u003ctd\u003eTapers from the bead to the tip, on the bead centreline\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid ethylene propylene diene monomer (EPDM) rubber\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65–75° Shore A (data sheet: 65–75 IRHD)\u003c\/td\u003e\n\u003ctd\u003eMethod not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 MPa (10 N\/mm²)\u003c\/td\u003e\n\u003ctd\u003eMethod not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e500%\u003c\/td\u003e\n\u003ctd\u003eMethod not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eMethod not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e21%\u003c\/td\u003e\n\u003ctd\u003e22 hours at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e72 hours at 40 °C, 22 pphm ozone, extended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: hardness change\u003c\/td\u003e\n\u003ctd\u003e0 IRHD\u003c\/td\u003e\n\u003ctd\u003e70 hours at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: tensile change\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e70 hours at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: elongation change\u003c\/td\u003e\n\u003ctd\u003e0%\u003c\/td\u003e\n\u003ctd\u003e70 hours at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +90 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.05 kg per metre (50 g\/m; about 1.5 kg per 30 m coil)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eAbout 1.1–1.4 g\/cm³ \u003cem\u003e(typical for solid EPDM, not tested on this profile)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer. Extruded rubber is commonly made to ISO 3302-1 class E2 \u003cem\u003e(typical for EPDM extrusions, not tested on this profile)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eCut lengths 14–29 m (one continuous piece) or a 30 m full coil\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e£14.85\/m inc VAT on cut lengths; £10.69\/m on the 30 m coil (£320.76)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eThe manufacturer does not name the test standards behind its figures, so we show the test conditions it gives and mark the method \"not stated\". All sizes are nominal.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eSolid EPDM is a general-purpose synthetic rubber with very good resistance to weathering, UV, ozone, water and steam. The manufacturer's heat-ageing results (no change in hardness or elongation after 70 hours at 70 °C) and its ozone test show it keeps its properties well outdoors. Like all EPDM it is \u003cstrong\u003enot\u003c\/strong\u003e suitable for contact with oils, fuels or most solvents.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does \u003cstrong\u003enot\u003c\/strong\u003e state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your job needs certified material, ask us before you order.\u003c\/p\u003e\n\u003ch3\u003eHow to fit it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the land and the gap.\u003c\/strong\u003e You need a surface or rebate about 16 mm wide for the tail. The closed gap at the bead should be a little under 3.5 mm, about 2.5 to 3 mm, so the bead is lightly squeezed. This is our guidance, not a manufacturer figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Degrease with a solvent wipe and let it dry fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond or fix the tail.\u003c\/strong\u003e Apply a contact adhesive suited to EPDM to the tail and the frame, wait until touch-dry, then press it down firmly. Or trap the tail under a glazing bead, trim strip or panel edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace the bead to the opening edge\u003c\/strong\u003e so the door, sash or glass lands on it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners and joints.\u003c\/strong\u003e Lay it on without stretching. Ease it round bends, or mitre-cut sharp corners and butt the ends tight.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eP seal\u003c\/th\u003e\n\u003cth\u003eBead\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/solid-rubber-epdm-p-extrusion-weather-seal-13mm-x-2-5mm-sold-per-metre\"\u003e13 × 2.5 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSolid, 2.5 mm\u003c\/td\u003e\n\u003ctd\u003eVery small gaps of about 1.5–2 mm and narrow frames\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e19 × 3.5 mm (this seal)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSolid, 3.5 mm\u003c\/td\u003e\n\u003ctd\u003eSmall, even gaps of about 2.5–3 mm; tail tucks under a trim or glazing bead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-p-extrusion-28-5mm-x-3-5mm-cut-length\"\u003e28.5 × 3.5 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSolid, 3.5 mm\u003c\/td\u003e\n\u003ctd\u003eSame bead with a wider tail for more bonding area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-epdm-p-extrusion-with-hollow-bead-for-door-and-window-seals-15mm-x-6mm\"\u003e15 × 6 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHollow, 6 mm\u003c\/td\u003e\n\u003ctd\u003eLarger or uneven gaps that need a softer squeeze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHow much to order:\u003c\/strong\u003e measure round every opening and add about 5% for trimming. For example, four hatches of 1200 × 800 mm need 4 × 4.0 m = 16 m, plus 5% = 16.8 m, so choose 17 m. From 22 m upwards the 30 m full coil costs less than a cut length.\u003c\/p\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoor and window seal on frames, sashes and cabinet doors with a small gap\u003c\/li\u003e\n\u003cli\u003eGlazing and panel welt: tail trapped under a bead or trim, bead against the glass or panel\u003c\/li\u003e\n\u003cli\u003eWeatherstrip for inspection hatches, access panels and enclosure lids\u003c\/li\u003e\n\u003cli\u003eVehicle, trailer, transport and marine doors, windows and lockers\u003c\/li\u003e\n\u003cli\u003eDecorative piping, edge trim and light impact cushioning between panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bead hollow or solid?\u003c\/strong\u003e\u003cbr\u003eSolid. A solid 3.5 mm bead gives a firm, even seal on small gaps and is hard to crush permanently. For larger or uneven gaps choose a hollow-bead P seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size gap will it seal?\u003c\/strong\u003e\u003cbr\u003eThe bead is 3.5 mm, so it suits closed gaps of about 2.5 to 3 mm, where it is squeezed by roughly 0.5 to 1 mm. If the gap is 3.5 mm or more it will not seal; choose a larger profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fix it?\u003c\/strong\u003e\u003cbr\u003eBond the 16 mm tail with a contact adhesive suited to EPDM, or trap it under a glazing bead, trim strip or panel edge. Because the tail thins to 1 mm, it sits almost flush once it is held down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM resists UV, ozone and weathering, and this compound showed no cracks in the manufacturer's 72-hour ozone test. It is rated from −40 °C to +90 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners?\u003c\/strong\u003e\u003cbr\u003eYes. It is light and flexible and will follow curves and bends. For sharp 90° corners, mitre-cut the seal and butt the ends together. Do not stretch it, or it will shrink back and open a gap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut cleanly with a sharp knife or scissors. Butt-join the ends tightly, and add a dab of instant adhesive (cyanoacrylate) for a permanent join.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it resistant to oil or fuel?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM swells in oils, fuels and most solvents. For oily areas use a neoprene or nitrile profile instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the minimum order?\u003c\/strong\u003e\u003cbr\u003eThis profile is cut from 30 m coils, so the shortest length we sell is 14 m. From 22 m upwards the full 30 m coil costs less than a cut length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo food-contact or WRAS approval is stated for this profile. Please contact us if you need a certified material.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"14m","offer_id":56592726786427,"sku":"IP-EPDMP-19X3.5-14","price":207.9,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56592726819195,"sku":"IP-EPDMP-19X3.5-15","price":222.75,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56592726851963,"sku":"IP-EPDMP-19X3.5-16","price":237.6,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56592726884731,"sku":"IP-EPDMP-19X3.5-17","price":252.45,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56592726917499,"sku":"IP-EPDMP-19X3.5-18","price":267.3,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56592726950267,"sku":"IP-EPDMP-19X3.5-19","price":282.15,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56592726983035,"sku":"IP-EPDMP-19X3.5-20","price":297.0,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56592727015803,"sku":"IP-EPDMP-19X3.5-21","price":311.85,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56592727048571,"sku":"IP-EPDMP-19X3.5-22","price":326.7,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56592727081339,"sku":"IP-EPDMP-19X3.5-23","price":341.55,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56592727114107,"sku":"IP-EPDMP-19X3.5-24","price":356.4,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56592727146875,"sku":"IP-EPDMP-19X3.5-25","price":371.25,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56592727179643,"sku":"IP-EPDMP-19X3.5-26","price":386.1,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56592727212411,"sku":"IP-EPDMP-19X3.5-27","price":400.95,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56592727245179,"sku":"IP-EPDMP-19X3.5-28","price":415.8,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56592727277947,"sku":"IP-EPDMP-19X3.5-29","price":430.65,"currency_code":"GBP","in_stock":true},{"title":"30m full coil","offer_id":56592727310715,"sku":"IP-EPDMP-19X3.5-30","price":320.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/solid-epdm-p-extrusion-19mm-x-3-5mm-studio-ec207137-e10e-4432-85a2-ff411dc08cf3.jpg?v=1795170702","url":"https:\/\/industrial-polymers.co.uk\/products\/solid-epdm-p-extrusion-19mm-x-3-5mm-per-metre","provider":"Industrial-polymers ","version":"1.0","type":"link"}