{"product_id":"t-seal-profile-food-grade-silicone-for-narrow-gaps-14mm-x-11mm-25m-roll","title":"Silicone T Seal Profile – 14mm x 11mm, 14mm x 3mm Head, 8mm Leg – 60 Shore A – 25m Coil","description":"\u003cp\u003eA wide, low-profile solid silicone T seal: a flat 14mm head only 3mm thick, on a sturdy 8mm push-in leg, 11mm tall overall. Push the leg into a slot or butt gap about 7.5–8.0mm wide and the thin head lies almost flush, lapping 3mm over the face on each side. It closes off panel joints, cabinet gaps and frame slots with a neat, hygienic cover strip that does not stand out. Made from 60 Shore A silicone for -50°C to +180°C, it comes in seven colours at the same price, in one unbroken 25m coil.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHead 14.0mm wide × 3.0mm thick; leg 8.0mm wide; 11.0mm overall (8.0mm of leg below the head)\u003c\/li\u003e\n\u003cli\u003e3.0mm shoulder each side of the leg, so the head covers both edges of the gap\u003c\/li\u003e\n\u003cli\u003e60 Shore A solid silicone, working range -50°C to +180°C\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states in writing that the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and that it is a WRAS approved material\u003c\/li\u003e\n\u003cli\u003eBlack, white, translucent, red, green, blue or yellow, all £675.00 per 25m coil (£27.00 per metre)\u003c\/li\u003e\n\u003cli\u003eHeld in stock in every colour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoints between stainless steel cabinets, worktops and equipment housings in food and catering areas\u003c\/li\u003e\n\u003cli\u003eFrame slots on oven, prover, hot-cupboard and drying-cabinet doors, up to +180°C\u003c\/li\u003e\n\u003cli\u003ePanel and expansion gaps in enclosures, cold rooms, HVAC units and duct access panels\u003c\/li\u003e\n\u003cli\u003eGlazing and infill panels in slotted frames, where a slim cover line looks tidy\u003c\/li\u003e\n\u003cli\u003eOutdoor and marine hatches and enclosures, where UV and ozone crack ordinary rubbers\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (red, green, blue, yellow) or easy visual inspection (white, translucent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-14x11mm-technical-drawing.png?v=1795310787\u0026amp;width=1000\" alt=\"Technical drawing of silicone T seal 14mm x 11mm: 14.0mm head width, 3.0mm head thickness, 8.0mm leg width, 11.0mm overall height, 8.0mm leg below head, 3.0mm shoulders, 60 Shore A\" width=\"1000\" height=\"1220\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section, flat square-cut head, centred leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e11.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead width\u003c\/td\u003e\n\u003ctd\u003e14.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead thickness\u003c\/td\u003e\n\u003ctd\u003e3.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg width (base thickness)\u003c\/td\u003e\n\u003ctd\u003e8.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e8.0 mm (reference, 11.0 − 3.0)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder each side\u003c\/td\u003e\n\u003ctd\u003e3.0 mm (reference, leg centred)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits slot or gap (our guidance)\u003c\/td\u003e\n\u003ctd\u003eApprox. 7.5–8.0 mm wide, at least 8 mm deep\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550 %\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm (26 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624, die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1, type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight\u003c\/td\u003e\n\u003ctd\u003eAbout 122 g per metre, 3.05 kg per coil (calculated from the 106 mm² section and density)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre inc VAT)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOur part number\u003c\/td\u003e\n\u003ctd\u003eIP-STP-14X11-\u0026lt;colour\u0026gt;\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer makes in writing for this profile. Ask us if your file needs the declaration.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles in repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials that come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is accepted for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe approvals cover the material as supplied. Whether your finished assembly complies also depends on its design, its cleaning regime and the other materials in it, so check it against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my gap?\u003c\/h3\u003e\n\u003cp\u003eMeasure the width and depth of the slot or gap. The leg is 8mm wide, so it grips best in a slot of about 7.5–8.0mm. The slot should be at least 8mm deep so the head can sit down on the face; deeper is fine, and the head simply rests on the surface. You need about 3mm of flat land either side for the shoulders. Once fitted, the head stands just 3mm proud, so this profile is a cover-and-seal strip for joints rather than a deep compression seal. For a door that closes onto the seal across a larger gap, choose one of our T seals with a deeper head.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the length of every slot or joint and allow about 5% for trimming. For example, sealing the vertical joints between four 900mm-high cabinets (three joints) needs 2.7m, or about 2.85m with the allowance, so one 25m coil covers eight such runs.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear old seal, grease and grit out of the slot and let it dry\u003c\/li\u003e\n\u003cli\u003eStart at one end of a straight run, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a small plastic roller as you go. A drop of soapy water helps it slide into a tight slot.\u003c\/li\u003e\n\u003cli\u003eIf the gap is loose or the seal must not move, run a bead of silicone adhesive into the slot first\u003c\/li\u003e\n\u003cli\u003eAt corners, mitre the thin head and keep the leg continuous, or cut and butt-join it. Don't stretch it round: stretched silicone shrinks back and opens a gap.\u003c\/li\u003e\n\u003cli\u003eCut the end slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot or gap does it fit?\u003c\/strong\u003e\u003cbr\u003eA slot or butt gap about 7.5–8.0mm wide and at least 8mm deep. The head is 14mm wide, so it overlaps the gap by 3mm each side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 8mm leg goes into the slot. The flat 14mm head sits on the surface and covers the gap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a door seal?\u003c\/strong\u003e\u003cbr\u003eIt suits doors and lids that close onto a frame slot with only a small gap, because the head is just 3mm thick. It works best as a flush cover strip over panel joints and slots. For bigger gaps, see our T seals with deeper heads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states in writing that the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact. It is also listed as a WRAS approved material for drinking water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe working range is -50°C to +180°C. Compression set is 31% after 22 hours at 175°C, so it keeps its shape on hot equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp utility knife or heavy shears on a cutting board, using a square to keep the cut straight. Butt the ends together, with a little silicone adhesive or RTV if the joint must stay sealed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. Silicone resists UV, ozone and weathering, which crack ordinary rubbers in outdoor and marine use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hard is it?\u003c\/strong\u003e\u003cbr\u003e60 Shore A, a firm silicone, about the feel of a car tyre tread. The 8mm leg holds firmly in the slot and the thin head stays flat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you stock every colour?\u003c\/strong\u003e\u003cbr\u003eYes. All seven colours are held in stock at the same price and dispatch with our standard delivery.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing? Call +44 1282 277786 or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e with your slot and gap sizes.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56589315342715,"sku":"IP-STP-14X11-BLACK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56589315375483,"sku":"IP-STP-14X11-WHITE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56589315408251,"sku":"IP-STP-14X11-TRANSLUC","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56589315441019,"sku":"IP-STP-14X11-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56589315473787,"sku":"IP-STP-14X11-GREEN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56589315506555,"sku":"IP-STP-14X11-BLUE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56589315539323,"sku":"IP-STP-14X11-YELLOW","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-14x11mm-black.png?v=1795310788","url":"https:\/\/industrial-polymers.co.uk\/products\/t-seal-profile-food-grade-silicone-for-narrow-gaps-14mm-x-11mm-25m-roll","provider":"Industrial-polymers ","version":"1.0","type":"link"}