{"product_id":"tapered-shower-seal-4-6mm-glass-fin-10-2mm-900mm","title":"Tapered Shower Screen Seal - 4-6mm Glass - Fin 10mm to 2mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered bottom seal for shower and bath screens with \u003cstrong\u003e4–6mm glass\u003c\/strong\u003e. The rigid PVC U-section pushes onto the bottom edge of the glass — no adhesive needed — while the soft flexible fin below is tapered in height, running from \u003cstrong\u003e10mm at one end down to 2mm at the other\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThat taper is the whole point: if the gap between the bottom of your glass and the top of the bath or tray is uneven — wider at one end than the other — a standard straight-finned seal leaks at the wide end or drags at the narrow end. This seal follows the slope and closes the gap along its full length.\u003c\/p\u003e\u003ch2\u003eChoosing a tapered seal\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the glass. In most cases we recommend a seal with a fin between \u003cstrong\u003e2–5mm bigger\u003c\/strong\u003e than the gap you need to seal, so the flexible fin compresses for a tight, watertight sweep. Our tapered seals come in a number of sizes — please refer to the product diagrams for the exact dimensions of this one.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e4mm, 5mm or 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin\u003c\/td\u003e\n\u003ctd\u003eTapered — 10mm down to 2mm (see product diagrams)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned for\u003c\/td\u003e\n\u003ctd\u003eUneven gaps between the glass and the bath or tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e900mm — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRigid PVC channel with soft flexible tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no adhesive required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSingle length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for our curved-seal service)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eCan be cut to the length you require at home\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals an uneven gap properly.\u003c\/strong\u003e Where the tray or bath sits out of level, the tapered fin keeps contact along the whole bottom edge — stopping the leak a straight seal leaves at the wide end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The rigid channel grips 4–6mm glass on its own, slides straight on and comes off again without residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy replacement.\u003c\/strong\u003e Cut it to length at home, or use our custom cutting service and it arrives ready to push on in minutes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUK stock, fast dispatch.\u003c\/strong\u003e Held in stock in the UK and dispatched same day when you order before 2pm.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 4–6mm thick, then measure the gap at both ends of the screen to confirm how it tapers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Compare your measurements with the product diagrams, allowing a fin 2–5mm bigger than the gap you need to seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Cut the 900mm length down if needed, then push the channel onto the bottom edge of the glass with the deeper end of the fin over the wider end of the gap.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your measurements to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right profile and size before you order — usually the same working day. Got curved glass? We can curve this seal or a similar profile to your measurements — just get in touch and we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363240456571,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363240489339,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/seal163-installed-v2-2246432f-d8c0-4b1d-bb48-02c783f96739.jpg?v=1787500753","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-4-6mm-glass-fin-10-2mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}