{"product_id":"tapered-shower-seal-4-6mm-glass-fin-15-5mm-900mm","title":"Tapered Shower Screen Seal - 4-6mm Glass - Fin 15mm to 5mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered seal for shower and bath screens with \u003cstrong\u003e4–6mm glass\u003c\/strong\u003e, made for the awkward situation where the gap under the glass is uneven. The rigid PVC U section pushes onto the edge of the glass — no adhesive needed — and the soft flexible fin below it tapers in height from \u003cstrong\u003e15mm down to 5mm\u003c\/strong\u003e along the 900mm length, following the slope as the gap narrows.\u003c\/p\u003e\u003cp\u003eIt is designed for the bottom edge of the glass, where a tray, bath or floor runs out of level and a standard straight-finned seal would leave one end gaping. Please refer to the product diagrams for the exact profile.\u003c\/p\u003e\u003ch2\u003eWhich tapered seal do I need?\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the glass. In most cases we recommend a seal with a fin \u003cstrong\u003e2–5mm bigger than the gap\u003c\/strong\u003e you need to seal, so the fin stays compressed against the tray along the whole run. Our tapered seals come in a number of different sizes — if this 15mm-to-5mm taper doesn't match your measurements, ask us about the other sizes in the range.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e4mm, 5mm or 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin taper\u003c\/td\u003e\n\u003ctd\u003e15mm at one end down to 5mm at the other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e900mm only — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRigid PVC U section with soft flexible tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no adhesive required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for a curved-seal quote)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eCan be cut to length at home once received\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSamples\u003c\/td\u003e\n\u003ctd\u003eNot available — a small sample would only show one point of the taper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals an uneven gap properly.\u003c\/strong\u003e When the tray or bath runs out of level, a straight seal either jams at one end or leaks at the other. The tapered fin follows the slope so the whole bottom edge stays sealed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The channel is designed to comfortably grip 4–6mm glass on its own — it slides straight on and can be removed without leaving residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects floors and fittings.\u003c\/strong\u003e Closing the gap under the glass stops water pooling outside the shower and damaging flooring, skirting and plaster.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 4–6mm thick and measure the gap at both ends of the bottom edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Confirm the 15mm-to-5mm taper covers your measurements, allowing a fin 2–5mm bigger than the gap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Trim to length if needed, then push the channel onto the bottom edge of the glass with the deeper end of the fin over the wider end of the gap.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your measurements to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right taper before you order — usually the same working day. Got curved glass? Contact us and we may be able to quote to curve this seal or a similar seal to your measurements — we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363120787835,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363120820603,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/seal165-installed-650ba55a-8bd8-4c2b-bb3c-f13fe362892c.jpg?v=1787474289","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-4-6mm-glass-fin-15-5mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}