{"product_id":"tapered-shower-seal-4-6mm-glass-fin-20-10mm-900mm","title":"Tapered Shower Screen Seal - 4-6mm Glass - Fin 20mm to 10mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered shower screen seal for \u003cstrong\u003e4–6mm glass\u003c\/strong\u003e, made for the awkward problem of an \u003cstrong\u003euneven gap\u003c\/strong\u003e between the bottom of the glass and the top of the bath or tray. The high-quality rigid PVC U-section pushes onto the edge of the glass with no additional adhesive, and the soft flexible fin below is tapered in height — on this seal from \u003cstrong\u003e20mm down to 10mm\u003c\/strong\u003e — so it follows a gap that widens along its run.\u003c\/p\u003e\u003cp\u003eIf a screen was fitted slightly out of level, or the bath edge slopes, a standard parallel fin either gapes at one end or buckles at the other. A tapered fin closes the whole run neatly. Please refer to the product diagrams for exact sizes. It is a straight seal, designed for straight glass only.\u003c\/p\u003e\u003ch2\u003eChoosing the right taper\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the glass. Our tapered seals come in a number of different sizes to accommodate any size gap, and in most cases we recommend a fin 2–5mm bigger than the gap you need to seal — the flexible fin compresses to give a tighter seal.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e4mm, 5mm or 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin height\u003c\/td\u003e\n\u003ctd\u003eTapered, 20mm to 10mm — see product diagrams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength available\u003c\/td\u003e\n\u003ctd\u003e900mm — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRigid PVC U-section with soft flexible tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit — grips the glass with no adhesive required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSingle length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for our curved-seal service)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eEasily trimmed to length once received\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals uneven gaps properly.\u003c\/strong\u003e The tapered fin follows a gap that changes along the glass, closing it end to end where a parallel seal would leave daylight or bunch up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStops leaks and protects your bathroom.\u003c\/strong\u003e An unsealed or half-sealed gap sends water onto the floor every time you shower — closing it protects flooring, skirting and plaster from long-term damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The rigid PVC channel grips 4–6mm glass on its own, so there is nothing to stick, cure or clean up — and it can be removed without leaving residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBarely visible once fitted.\u003c\/strong\u003e The clear PVC blends into the glass for a neat, discreet finish.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 4–6mm thick, then measure the gap at both ends of the glass edge to confirm the 20mm-to-10mm taper suits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e The seal comes in a 900mm length — trim it down at home, or add custom cutting and it arrives ready to fit. Remember: a fin 2–5mm bigger than the gap gives the best seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Trim to length if needed, then push the seal onto the glass with the deeper end of the fin over the wider end of the gap, working along from one end — press it on rather than sliding it.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your gap measurements at each end to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right taper size before you order — usually the same working day. Got curved glass? We can quote to curve this seal (or a similar profile) to your measurements — just get in touch and we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363207328123,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363207360891,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/SEAL168_app_eadcfac8-2cb3-4886-87a7-9b2ba276aa71.png?v=1785703678","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-4-6mm-glass-fin-20-10mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}