{"product_id":"tapered-shower-seal-4-6mm-glass-fin-20-15mm-900mm","title":"Tapered Shower Screen Seal - 4-6mm Glass - Fin 20mm to 15mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered seal for shower and bath screens with \u003cstrong\u003e4–6mm glass\u003c\/strong\u003e. The rigid PVC U-section pushes straight onto the edge of the glass — no adhesive required — and the soft flexible fin underneath tapers in height from \u003cstrong\u003e20mm down to 15mm\u003c\/strong\u003e along its length.\u003c\/p\u003e\u003cp\u003eThe taper is the clever part: it closes an uneven gap between the bottom of the glass and the top of the bath or shower tray, where one end of the screen sits further from the surface than the other — a job a standard straight-fin seal simply cannot do.\u003c\/p\u003e\u003ch2\u003eWhich tapered seal do I need?\u003c\/h2\u003e\u003cp\u003eMeasure the gap under your glass at both ends of the screen. In most cases we recommend a fin between \u003cstrong\u003e2–5mm bigger than the gap\u003c\/strong\u003e you need to seal, so the flexible blade compresses against the bath or tray for a watertight fit. Our tapered seals come in a number of different sizes to suit any gap — please refer to the product diagrams for the exact dimensions of this one.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e4mm, 5mm or 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin taper\u003c\/td\u003e\n\u003ctd\u003e20mm at one end down to 15mm at the other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e900mm — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRigid PVC U-section with soft flexible tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no adhesive required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eBottom of the screen, over an uneven gap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSingle length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for a curved-seal quote)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eEasily cut down to size at home\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals gaps that standard seals can't.\u003c\/strong\u003e If your screen sits slightly out of level, a straight fin leaves a leak at one end — the tapered fin follows the slope and seals the full width of the screen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStops leaks and protects your bathroom.\u003c\/strong\u003e Closing the gap under the glass keeps water off the floor and protects flooring, skirting and plaster from long-term damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The U-section grips 4–6mm glass on its own, so it pushes straight on and comes off cleanly whenever it needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCut to fit at home.\u003c\/strong\u003e The 900mm length trims down easily, or use our custom cutting service and it arrives ready to fit.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 4–6mm thick, then measure the gap under the glass at both ends of the screen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Check the fin heights against your gaps — aim for a fin 2–5mm bigger than the gap at each end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Trim to length if needed, then push the U-section onto the bottom edge of the glass with the deeper end of the fin over the wider gap. No tools, no adhesive.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your measurements to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right taper and size before you order — usually the same working day. Got curved glass? Get in touch and we may be able to quote to curve this or a similar seal to your measurements — we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363235377531,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363235410299,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/SEAL169_app_bd70730f-da9e-479b-aa69-8632a647afd8.png?v=1785705255","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-4-6mm-glass-fin-20-15mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}