{"product_id":"tapered-shower-seal-4-6mm-glass-fin-25-10mm-900mm","title":"Tapered Shower Screen Seal - 4-6mm Glass - Fin 25mm to 10mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered seal for shower and bath screens with \u003cstrong\u003e4–6mm glass\u003c\/strong\u003e, made for the awkward situation a standard seal cannot fix: an \u003cstrong\u003euneven gap\u003c\/strong\u003e between the bottom of the glass and the top of the bath or tray. The rigid PVC U-section pushes onto glass measuring 4mm, 5mm or 6mm thick with no adhesive, and the soft flexible fin below it is tapered in height — from \u003cstrong\u003e25mm at one end down to 10mm at the other\u003c\/strong\u003e — so it follows a gap that widens along its length.\u003c\/p\u003e\u003cp\u003ePlease refer to the product diagrams for the exact fin dimensions. Our tapered seals come in a number of different sizes to accommodate any size of gap.\u003c\/p\u003e\u003ch2\u003eChoose the right taper\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the glass. In most cases we recommend a seal with a fin \u003cstrong\u003e2–5mm bigger than the gap\u003c\/strong\u003e you need to seal, so the flexible fin compresses onto the surface for a watertight finish. If this 25mm-to-10mm taper does not match your measurements, we stock other sizes of tapered seal — just ask.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e4mm, 5mm or 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin taper\u003c\/td\u003e\n\u003ctd\u003e25mm down to 10mm — see product diagrams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizing guide\u003c\/td\u003e\n\u003ctd\u003eChoose a fin 2–5mm bigger than the gap to be sealed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength available\u003c\/td\u003e\n\u003ctd\u003e900mm — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRigid PVC U-section with soft flexible tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit onto the glass edge — no adhesive required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for our curved-seal service)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eEasily trimmed to length at home\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals sloping and uneven gaps.\u003c\/strong\u003e Where a bath or tray sits out of level, a standard straight fin leaves a widening leak at one end. The tapered fin follows the slope and keeps contact along the whole edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The rigid U-section grips 4–6mm glass on its own — it pushes straight on and comes off again without leaving residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexible fin, tight seal.\u003c\/strong\u003e The soft fin compresses against the bath or tray, which is why a fin slightly bigger than the gap gives the most watertight result.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCut to fit at home.\u003c\/strong\u003e The 900mm length trims down easily, or add our custom cutting service and it arrives ready to fit.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 4–6mm thick, then measure the gap at both ends of the glass to see how it tapers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Pick the tapered seal whose fin is 2–5mm bigger than your gap at each end — this 900mm seal tapers from 25mm to 10mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Trim to length if needed, then push the U-section onto the bottom edge of the glass with the deeper end of the fin over the wider end of the gap. No tools, no adhesive, no drying time.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your gap measurements at both ends to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right taper before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements — just get in touch and we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363117412731,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363117445499,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/seal170-installed-14477aec-39b9-46b0-b709-5f2132915fbb.jpg?v=1787474288","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-4-6mm-glass-fin-25-10mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}