{"product_id":"tapered-shower-seal-4-6mm-glass-fin-25-15mm-900mm","title":"Tapered Shower Screen Seal - 4-6mm Glass - Fin 25mm to 15mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered seal for shower and bath screens with \u003cstrong\u003e4–6mm glass\u003c\/strong\u003e, made for the awkward situation a standard seal can't handle: an uneven gap. The rigid PVC U-section pushes onto the edge of the glass — no adhesive needed — while the soft flexible fin below tapers in height from \u003cstrong\u003e25mm at one end to 15mm at the other\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThat taper lets the fin follow a gap that widens between the bottom of the glass and the top of the bath or tray — common where a bath or tray isn't quite level — sealing evenly along the full run where a straight fin would either drag or leave a gap. Please refer to the product diagrams for full sizes.\u003c\/p\u003e\u003ch2\u003eWhich tapered seal do I need?\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the glass. In most cases we recommend a seal with a fin 2–5mm bigger than the gap you need to seal, so the flexible fin stays in contact along the whole length. Our tapered seals come in a number of different sizes, so if 25mm-to-15mm isn't the right drop for your screen, another size will be.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e4mm – 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin taper\u003c\/td\u003e\n\u003ctd\u003e25mm at one end tapering to 15mm at the other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin type\u003c\/td\u003e\n\u003ctd\u003eSoft flexible fin, tapered in height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength available\u003c\/td\u003e\n\u003ctd\u003e900mm — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRigid PVC channel with soft tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no adhesive, screws or tools required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSingle length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for our curved-seal service)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eCan be cut to the length you require\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals an uneven gap.\u003c\/strong\u003e When the gap under your screen isn't the same at both ends, a standard fin can't seal it — a tapered fin follows the slope and closes it along the whole run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStops leaks and protects floors.\u003c\/strong\u003e Water escaping under one end of a screen soaks flooring and skirting. Matching the taper to your gap stops it at the source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The channel grips 4–6mm glass on its own and comes off without residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUK stock, fast dispatch.\u003c\/strong\u003e Held in stock in the UK and dispatched same day when you order before 2pm.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 4–6mm thick and measure the gap at both ends of the screen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Pick the tapered size with a fin 2–5mm bigger than your gap — this one runs 25mm down to 15mm over its 900mm length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Trim to length if needed, then push the channel onto the bottom edge of the glass with the deeper end of the fin over the wider end of the gap.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your gap measurements at each end to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right taper before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements — just get in touch and we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363162435963,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363162468731,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/seal171-installed-ccbdb5ce-ac26-4a9e-ae0b-13c01b18befe.jpg?v=1787474761","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-4-6mm-glass-fin-25-15mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}