{"product_id":"tapered-shower-seal-4-6mm-glass-fin-25-20mm-900mm","title":"Tapered Shower Screen Seal - 4-6mm Glass - Fin 25mm to 20mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered shower screen seal for \u003cstrong\u003e4–6mm glass\u003c\/strong\u003e, designed for the awkward situation where the gap under your screen is uneven. The rigid PVC channel pushes straight onto the edge of the glass — no adhesive needed — while the soft flexible fin tapers in height from \u003cstrong\u003e25mm down to 20mm\u003c\/strong\u003e along its length, closing a gap that widens or narrows between the bottom of the glass and the top of your bath or tray.\u003c\/p\u003e\u003cp\u003eIf your bath screen or shower door leaks at one end but not the other, a standard straight-fin seal will never sit right. A tapered fin follows the slope, sealing the full width of the screen in one piece.\u003c\/p\u003e\u003ch2\u003eWhich taper do I need?\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the glass. In most cases we recommend a fin between \u003cstrong\u003e2–5mm bigger\u003c\/strong\u003e than the gap you need to seal — the flexible fin compresses for a tighter seal. This profile tapers from 25mm to 20mm; our tapered seals come in a number of other sizes, so if your measurements fall outside this range, get in touch and we'll point you to the right one. Please refer to the product diagrams for exact cross-section sizes.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e4mm, 5mm or 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin taper\u003c\/td\u003e\n\u003ctd\u003e25mm tapering to 20mm — for uneven gaps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRigid PVC channel with soft flexible tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e900mm — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no adhesive required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSingle length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for a curved-seal quote)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eCan be cut to the length you require at home\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals uneven gaps properly.\u003c\/strong\u003e A gap that tapers from one end of the screen to the other is the classic cause of a persistent leak at just one corner — this fin follows the slope and closes it along the whole edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The channel grips 4–6mm glass on its own, so it slides straight on and can be removed without leaving residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCut to fit at home.\u003c\/strong\u003e The 900mm length trims down easily, or choose the custom cut option and it arrives ready to fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNearly invisible.\u003c\/strong\u003e The clear PVC blends in with your glass once fitted, so the fix doesn't spoil the look of the enclosure.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 4–6mm thick and measure the gap at both ends of the screen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Confirm the 25mm–20mm taper covers your gap — aim for a fin 2–5mm bigger than the gap itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Trim to length if needed, then push the channel onto the bottom edge of the glass with the fin facing the bath or tray. No tools, no adhesive, no drying time.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your measurements to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right taper before you order — usually the same working day. Got curved glass? We may be able to curve this or a similar seal to your measurements — just get in touch and we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363178131835,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363178164603,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/seal172-installed-b388df0e-2fb6-433f-98af-f184b501adc8.jpg?v=1787474854","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-4-6mm-glass-fin-25-20mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}