{"product_id":"tapered-shower-seal-6-8mm-glass-fin-15-10mm-900mm","title":"Tapered Shower Screen Seal - 6-8mm Glass - Fin 15mm to 10mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered seal for shower and bath screens with \u003cstrong\u003e6–8mm glass\u003c\/strong\u003e. The high-quality rigid PVC U-section pushes onto the bottom edge of the glass and grips comfortably with no need for any additional adhesive, while the soft flexible fin below is \u003cstrong\u003etapered in height from 15mm to 10mm\u003c\/strong\u003e along its length.\u003c\/p\u003e\u003cp\u003eThat taper is the point: where the gap between the bottom of the glass and the top of the bath or tray isn't even — wider at one end than the other — a standard straight-finned seal either drags or leaves a gap. This one follows the slope and seals the lot.\u003c\/p\u003e\u003ch2\u003eWhich tapered size do I need?\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the glass and check the taper against the product diagrams. Our tapered seals come in a number of different sizes to accommodate any size gap — in most cases we recommend a fin between \u003cstrong\u003e2–5mm bigger\u003c\/strong\u003e than the gap you need to seal, so the flexible fin compresses for a tight fit.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e6mm – 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin taper\u003c\/td\u003e\n\u003ctd\u003e15mm down to 10mm — see product diagrams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e900mm only — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRigid PVC U-section with soft flexible tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no adhesive required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for a curved-seal quote)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eEasily cut to length at home\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals an uneven gap properly.\u003c\/strong\u003e When the tray or bath runs out of level, a parallel seal can't touch both ends at once. The tapered fin keeps contact along the whole edge, so water stays in and your floor stays dry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The U-section grips 6–8mm glass on its own — it slides straight on and can be removed or repositioned without leaving residue on the glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBarely visible once fitted.\u003c\/strong\u003e The clear PVC blends into the glass, so the fix doesn't announce itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCut to fit at home.\u003c\/strong\u003e The 900mm length trims down easily for a neat edge-to-edge fit, or use our custom cutting service and it arrives ready to fit.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 6–8mm thick, then measure the gap at each end of the glass to confirm the taper — aim for a fin 2–5mm bigger than the gap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Check the 15mm-to-10mm taper suits your measurements using the product diagrams; if not, see our other tapered sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Trim to length if needed, then push the U-section onto the bottom edge of the glass with the deeper end of the fin over the wider gap. No tools, no adhesive, no drying time.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your measurements to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right taper and size before you order — usually the same working day. Got curved glass? We may be able to quote to curve this seal or a similar seal to your measurements — just get in touch and we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363191927163,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363191959931,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/seal176-installed-7fcb25ea-b76f-4b4f-bda7-6d6abc7b023f.jpg?v=1787474936","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-6-8mm-glass-fin-15-10mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}