{"product_id":"tapered-shower-seal-6-8mm-glass-fin-20-15mm-900mm","title":"Tapered Shower Screen Seal - 6-8mm Glass - Fin 20mm to 15mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered seal for shower and bath screens with \u003cstrong\u003e6–8mm glass\u003c\/strong\u003e, made for the awkward situation where the gap under the glass is uneven. The rigid PVC U-section pushes onto the edge of the glass with no adhesive, while the soft flexible fin below is \u003cstrong\u003etapered in height from 20mm down to 15mm\u003c\/strong\u003e along its length — so it follows a sloping tray edge or an out-of-level bath instead of leaving a widening gap at one end.\u003c\/p\u003e\u003cp\u003eThis 900mm profile is one of a family of tapered seals in different sizes, so if your gap runs outside this range we can help you find the right one. Please refer to the product diagrams for the exact cross-section.\u003c\/p\u003e\u003ch2\u003eWhich tapered seal do I need?\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the run. In most cases we recommend a seal with a fin \u003cstrong\u003e2–5mm bigger than the gap\u003c\/strong\u003e you need to seal — the flexible fin compresses for a tighter finish. This version tapers from 20mm to 15mm; contact us to see our other tapered sizes.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e6mm – 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin\u003c\/td\u003e\n\u003ctd\u003eSoft flexible fin, tapered from 20mm to 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eRigid PVC U-section with tapered flexible fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength available\u003c\/td\u003e\n\u003ctd\u003e900mm only — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit onto the glass edge — no adhesive required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for a quote to curve this or a similar seal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eCan be cut to the length you require at home\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals an uneven gap properly.\u003c\/strong\u003e A standard straight-finned seal fitted to a sloping gap either drags at one end or leaks at the other — the tapered fin closes the gap along its whole run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The rigid U-channel grips 6–8mm glass on its own and slides straight onto the edge, with nothing to glue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects your bathroom floor.\u003c\/strong\u003e Closing the gap under the screen stops water escaping onto flooring, skirting and plaster every time you shower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrim with care.\u003c\/strong\u003e Because the fin is tapered, cut from the end that keeps the taper matched to your gap — or ask about our custom cutting service.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 6–8mm thick and measure the gap at both ends of the run to confirm the 20mm-to-15mm taper suits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Confirm this size covers your gap — ideally with the fin 2–5mm bigger than the gap at each point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Trim to length if needed, then push the U-channel onto the edge of the glass with the deeper end of the fin over the wider end of the gap.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your measurements to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right tapered size before you order — usually the same working day. Got curved glass? Get in touch and we may be able to quote to curve this or a similar seal to your measurements.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363212046715,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363212079483,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/SEAL179_app_1bc4f4f9-2fa6-49bc-a39f-e105b3209ec7.png?v=1785703973","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-6-8mm-glass-fin-20-15mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}