{"product_id":"tapered-shower-seal-6-8mm-glass-fin-25-15mm-900mm","title":"Tapered Shower Screen Seal - 6-8mm Glass - Fin 25mm to 15mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered shower screen seal for \u003cstrong\u003e6–8mm glass\u003c\/strong\u003e, made for the awkward, uneven gap left when the bath or tray is not quite level with the glass. The rigid PVC U-channel simply pushes onto the edge of the glass — no adhesive needed — and the soft flexible fin below tapers in height from \u003cstrong\u003e25mm at one end to 15mm at the other\u003c\/strong\u003e, following the slope of your gap.\u003c\/p\u003e\u003cp\u003eFit it along the bottom edge of the screen with the deeper end of the fin over the wider end of the gap, and the fin closes the whole run evenly — something a straight-finned seal simply cannot do.\u003c\/p\u003e\u003ch2\u003eWhich tapered seal do I need?\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the glass. In most cases we recommend using a seal with a fin between \u003cstrong\u003e2–5mm bigger\u003c\/strong\u003e than the gap you need to seal — the flexible fin compresses for a tighter finish. Our tapered seals come in a number of different sizes to accommodate any size of gap, so if 25mm-to-15mm is not quite right, ask us about the other sizes.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e6mm – 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin height\u003c\/td\u003e\n\u003ctd\u003eTapers from 25mm to 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength available\u003c\/td\u003e\n\u003ctd\u003e900mm only — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRigid PVC U-section with soft flexible tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no adhesive required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSingle length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for our curved-seal service)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eEasily cut to the length you require\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals uneven gaps properly.\u003c\/strong\u003e A straight seal on a sloping gap leaves one end leaking — the tapered fin closes the gap along its whole length, protecting your floor from escaping water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The U-channel grips 6–8mm glass on its own — it slides straight on and can be removed without residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBarely visible once fitted.\u003c\/strong\u003e The clear PVC blends into the glass, keeping the enclosure looking clean and bright.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUK stock, fast dispatch.\u003c\/strong\u003e Order before 2pm and your seal is dispatched the same working day.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 6–8mm thick, measure the width of the screen, and measure the gap at both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Pick the tapered size with a fin 2–5mm bigger than your gap — this one covers a run from 25mm down to 15mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Trim to length if needed, then push the channel onto the bottom edge of the glass with the deeper end of the fin over the wider end of the gap. No tools, no adhesive, no drying time.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your measurements to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right size before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements — just get in touch and we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363148018043,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363148050811,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/SEAL181_app.png?v=1785701676","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-6-8mm-glass-fin-25-15mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}