{"product_id":"tapered-shower-seal-6-8mm-glass-fin-25-20mm-900mm","title":"Tapered Shower Screen Seal - 6-8mm Glass - Fin 25mm to 20mm - 900mm","description":"\u003ch2\u003eWhat this seal is\u003c\/h2\u003e\u003cp\u003eA clear tapered seal for shower and bath screens with \u003cstrong\u003e6–8mm glass\u003c\/strong\u003e where the gap beneath the glass is uneven. The rigid PVC U-section pushes onto the edge of the glass with no additional adhesive, and the soft flexible fin \u003cstrong\u003etapers in height from 25mm to 20mm\u003c\/strong\u003e along the 900mm length — please refer to the product diagrams for exact sizes.\u003c\/p\u003e\u003cp\u003eIt is designed for the bottom of a screen where the glass is not parallel with the bath or tray, so one end of the gap is larger than the other. Our tapered seals come in a number of different sizes to accommodate any size of gap.\u003c\/p\u003e\u003ch2\u003eWhich tapered size do I need?\u003c\/h2\u003e\u003cp\u003eMeasure the gap at both ends of the glass. In most cases we recommend a seal with a fin \u003cstrong\u003e2–5mm bigger than the gap\u003c\/strong\u003e you need to seal — the soft fin compresses for a tight, even finish. If this 25mm-to-20mm taper does not match your gap, see our other tapered sizes or get in touch.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003ctable class=\"iplp__spec\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits glass thickness\u003c\/td\u003e\n\u003ctd\u003e6mm – 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFin height\u003c\/td\u003e\n\u003ctd\u003eTapers from 25mm to 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical use\u003c\/td\u003e\n\u003ctd\u003eUneven gap between the bottom of the glass and the bath or tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength available\u003c\/td\u003e\n\u003ctd\u003e900mm only — custom cutting service available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eRigid PVC U-section with soft tapered fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePush-fit onto the glass edge — no adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass type\u003c\/td\u003e\n\u003ctd\u003eStraight glass (contact us for a curved-seal quote)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting down\u003c\/td\u003e\n\u003ctd\u003eEasily cut to length at home\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhy fit this seal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSeals an uneven gap properly.\u003c\/strong\u003e A parallel seal fitted to a sloping gap either leaks at one end or drags at the other — the tapered fin follows the slope and seals evenly along the full width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStops leaks and protects your bathroom.\u003c\/strong\u003e Closing the gap under the glass keeps water off flooring, skirting and plaster — a minutes-long job that prevents long-term damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo adhesive, no mess.\u003c\/strong\u003e The U-section grips 6–8mm glass on its own, so it pushes straight on and can be removed later without leaving residue on the glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCut to fit at home.\u003c\/strong\u003e Trim the 900mm length down to your screen width, or use our custom cutting service and it arrives ready to fit.\u003c\/p\u003e\u003ch2\u003eFitting in three steps\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Measure.\u003c\/strong\u003e Check your glass is 6–8mm thick and measure the gap at both ends of the glass to confirm the taper suits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2. Choose.\u003c\/strong\u003e Pick a fin 2–5mm bigger than your gap — this profile tapers from 25mm to 20mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3. Fit.\u003c\/strong\u003e Remove the old seal, clean the glass edge, trim the new seal to size and push the U-section onto the bottom edge with the deeper end of the fin over the larger gap.\u003c\/p\u003e\u003ch2\u003eNot sure it fits?\u003c\/h2\u003e\u003cp\u003eEmail a photo of your old seal or your measurements to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and our UK team will confirm the right tapered size before you order — usually the same working day. Got curved glass? We may be able to curve this seal or a similar profile to your measurements — just get in touch and we'll send you our simple measuring guide.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"900mm","offer_id":56363201331579,"sku":null,"price":35.98,"currency_code":"GBP","in_stock":true},{"title":"900mm - Custom Cut (+£10.00)","offer_id":56363201364347,"sku":null,"price":45.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/seal182-installed-93992d25-14e3-40fb-84a3-de9f85de7fc0.jpg?v=1787474939","url":"https:\/\/industrial-polymers.co.uk\/products\/tapered-shower-seal-6-8mm-glass-fin-25-20mm-900mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}