{"product_id":"tpe-sponge-seal-adhesive-backed-dual-hardness-9-5mm-x-9-5mm-x-100m","title":"TPE Sponge Seal – Self-Adhesive, Dual Hardness – 9.5mm x 9.5mm for 6–8mm Gaps – 100m Coil","description":"\u003cp\u003eA compact, self-adhesive \u003cstrong\u003eTPE sponge seal, 9.5mm x 9.5mm\u003c\/strong\u003e, for closing gaps of \u003cstrong\u003e6mm to 8mm\u003c\/strong\u003e on cabinet and enclosure doors, hatches, lids and access panels. It is a dual-hardness extrusion: a firm, flat 30 Shore D TPE base carries the adhesive tape and keeps the strip straight, and a soft 15 Shore A TPE foam bulb (9mm diameter, hollow) squashes down when the door closes, so it seals against air, dust and water. Peel the liner, press it on, done. Supplied as one continuous 100m coil, black, from UK stock.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 9.5mm wide x 9.5mm high; 9mm diameter hollow foam bulb on a 9.5mm wide flat base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals gaps of 6mm to 8mm\u003c\/strong\u003e (closed-door clearance between the frame and the door)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual hardness:\u003c\/strong\u003e 30 Shore D solid TPE base, 15 Shore A TPE foam bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-adhesive:\u003c\/strong\u003e factory-applied adhesive tape with a peel-off liner, no glue or fixings needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide temperature range:\u003c\/strong\u003e −50°C to +75°C in use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight:\u003c\/strong\u003e 35g per metre; cuts cleanly with a sharp knife or heavy-duty scissors; 100% recyclable TPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValue:\u003c\/strong\u003e £1,133.91 per 100m coil inc VAT, which is about £11.34 per metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eElectrical, control and instrument enclosure doors and covers\u003c\/li\u003e\n\u003cli\u003eCabinet, locker and cupboard doors in workshops, vehicles and boats\u003c\/li\u003e\n\u003cli\u003eInspection hatches, access panels and equipment lids\u003c\/li\u003e\n\u003cli\u003eDraught and dust sealing on doors and windows with a 6–8mm gap\u003c\/li\u003e\n\u003cli\u003eLight impact and surface protection along frames, edges and runs of pipe or cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-sponge-seal-9-5mm-x-9-5mm-technical-drawing.png?v=1795186423\" alt=\"Technical drawing of the TPE sponge seal 9.5mm x 9.5mm: 9.5mm base width, 9.5mm overall height, 9mm diameter foam bulb with 2mm wall, solid 30 Shore D base and adhesive tape\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNominal dimensions in mm, free state before compression. The 9.5mm height is measured to the underside of the base; the adhesive tape and liner sit below it.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eHow it seals\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-sponge-seal-9-5mm-x-9-5mm-fitted-6-8mm-gap.png?v=1795186424\" alt=\"To-scale illustration of the 9.5mm TPE sponge seal on a steel frame, before and after a door closes to a 7mm gap\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eStick the flat base to the frame (or to the door) so the bulb faces the mating surface. When the door closes to a gap of 6–8mm, the hollow foam bulb is squeezed by roughly 15–35% and presses evenly along its length. The manufacturer rates the foam for about 25% working compression, which lets it take up small irregularities in the frame.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure the gap between the frame and the closed door (a stack of feeler gauges or a strip of card works). Choose a seal whose recommended gap range covers what you measured.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-sponge-protective-d-profile-6mm-x-5-5mm-100m-coil\"\u003eTPE sponge D profile 6 x 5.5mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e6 x 5.5mm\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003ctd\u003eVery small gaps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-sponge-d-profile-10mm-x-8mm-adhesive-backed-100m-coil\"\u003eTPE sponge D profile 10 x 8mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 8mm\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003ctd\u003eSlightly lower, D-shaped bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTPE sponge seal 9.5 x 9.5mm (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9.5 x 9.5mm\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003ctd\u003e6–8mm gaps, round hollow bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-sponge-seal-10mm-x-17mm-tubular-profile-50m-coil\"\u003eTPE sponge seal 10 x 17mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 17mm\u003c\/td\u003e\n\u003ctd\u003e50m\u003c\/td\u003e\n\u003ctd\u003eLarger gaps, taller tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-sponge-seal-14mm-x-20mm-with-adhesive-backing-50m-coil\"\u003eTPE sponge seal 14 x 20mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14 x 20mm\u003c\/td\u003e\n\u003ctd\u003e50m\u003c\/td\u003e\n\u003ctd\u003eLarge, uneven gaps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eProfile and dimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSelf-adhesive bulb seal: hollow round foam tube on a flat solid base\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (base)\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, ISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (to underside of base)\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, ISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFoam bulb outside diameter\u003c\/td\u003e\n\u003ctd\u003e9.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness (foam wall)\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBore of the bulb\u003c\/td\u003e\n\u003ctd\u003e≈ 5 mm\u003c\/td\u003e\n\u003ctd\u003eDerived from 9mm diameter and 2mm wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGap (clearance) to fill\u003c\/td\u003e\n\u003ctd\u003e6 mm to 8 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking compression of the foam\u003c\/td\u003e\n\u003ctd\u003eAbout 25%\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1 class E2 (cross-section) \/ L2 (length), quality level 2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase material\u003c\/td\u003e\n\u003ctd\u003eSolid thermoplastic elastomer (TPE)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase hardness\u003c\/td\u003e\n\u003ctd\u003e30 Shore D\u003c\/td\u003e\n\u003ctd\u003eShore D durometer (manufacturer data sheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb material\u003c\/td\u003e\n\u003ctd\u003eTPE foam (sponge)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb hardness\u003c\/td\u003e\n\u003ctd\u003e15 Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A durometer (manufacturer data sheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eAdhesive tape on the base, with peel-off liner\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse temperature\u003c\/td\u003e\n\u003ctd\u003e−50 °C to +75 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeathering\u003c\/td\u003e\n\u003ctd\u003eGood UV and weather resistance, indoor and outdoor use\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecyclability\u003c\/td\u003e\n\u003ctd\u003e100% recyclable TPE\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength, elongation, tear, compression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need test data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e35 g per metre (about 3.5 kg per coil)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eOne continuous 100 m coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e≈ £11.34 inc VAT\u003c\/td\u003e\n\u003ctd\u003e£1,133.91 ÷ 100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eIP-TPES-9.5X9.5-STD\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe base is solid TPE (thermoplastic elastomer) and the bulb is TPE foam, so both parts are the same polymer family and the whole strip can be recycled. TPE behaves like rubber but is processed like a plastic; it stays flexible in the cold and resists UV and weather. The manufacturer does not state any food-contact, WRAS, fire or other approvals for this profile, so we do not claim any. If your application needs a certificate, contact us before ordering.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the mounting surface with isopropyl alcohol or a degreaser and let it dry. The tape bonds best to clean, dry, smooth metal, painted or plastic surfaces at room temperature.\u003c\/li\u003e\n\u003cli\u003ePeel back a short length of liner, position the seal and press it down firmly as you go, peeling the liner a little at a time.\u003c\/li\u003e\n\u003cli\u003eRun the seal round corners in one length where you can; on tight corners, cut a small V-notch out of the base only so the bulb stays continuous.\u003c\/li\u003e\n\u003cli\u003eButt the two ends together at the top of the opening so water runs away from the joint.\u003c\/li\u003e\n\u003cli\u003eAllow the adhesive a day to reach full strength before heavy use or washing down.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eData sheet\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-sponge-seal-adhesive-backed-dual-hardness-9-5mm-x-9-5mm--data-sheet.pdf?v=1794827587\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap will this seal?\u003c\/strong\u003e\u003cbr\u003eIt is designed for a closed-door clearance of 6mm to 8mm between the surface it is stuck to and the surface that closes onto it. Below 6mm the door becomes hard to close; above 8mm the bulb may not touch all the way round.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fit it?\u003c\/strong\u003e\u003cbr\u003eClean and dry the surface, peel the liner and press the flat base down firmly along its length. No glue, screws or clips are needed. See the fitting tips above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp utility knife or heavy-duty scissors. For a sealed joint, cut both ends square and butt them tightly together; a drop of cyanoacrylate (superglue) on the base can hold the ends, and placing the joint at the top of the opening keeps water out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The TPE base and foam bulb are UV and weather resistant and suitable for exterior doors, hatches and enclosures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperature range does it handle?\u003c\/strong\u003e\u003cbr\u003e−50°C to +75°C. It is not meant for oven doors or hot exhausts; for hotter applications choose a silicone seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of, and why two hardnesses?\u003c\/strong\u003e\u003cbr\u003eBoth parts are TPE. The 30 Shore D base is firm so the strip stays straight and the tape stays flat; the 15 Shore A foam bulb is very soft so it compresses easily and seals with little closing force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the bulb stay sealed if the frame is slightly uneven?\u003c\/strong\u003e\u003cbr\u003eYes, within reason. The foam is designed for about 25% working compression, so it can take up small variations along the frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy a shorter length?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a full 100m coil. If you need a different length or a quantity of coils, \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003eFor advice on choosing the right seal, call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"100m coil","offer_id":56584895234427,"sku":"IP-TPES-9.5X9.5-STD","price":1133.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-sponge-seal-adhesive-backed-dual-hardness-9-5mm-x-9-5mm--studio.jpg?v=1794827592","url":"https:\/\/industrial-polymers.co.uk\/products\/tpe-sponge-seal-adhesive-backed-dual-hardness-9-5mm-x-9-5mm-x-100m","provider":"Industrial-polymers ","version":"1.0","type":"link"}