{"product_id":"tpe-square-u-channel-14mm-x-14mm-profile-for-10mm-panels-25m-coil","title":"TPE Square U Channel – 14mm x 14mm Profile for 10mm Panels – 25m Coil","description":"\u003cp\u003eA square-section U channel for finishing the raw edges of 10mm sheet, plate and glass. The profile is 14mm wide by 14mm high, with a parallel-sided 10mm slot running 12mm deep, and the walls and base are a uniform 2mm thick all round. That even wall gives the trim the same stiffness on every face, so it soaks up knocks without folding, and the long 12mm arms grip a wide band of each face so glue is rarely needed. It is extruded from black 60 Shore A thermoplastic elastomer (TPE), supplied as one continuous 25m coil and held in stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-square-u-channel-14mm-x-14mm-technical-drawing.png?v=1795309905\" alt=\"Technical drawing of TPE square U channel 14mm x 14mm cross-section: 14mm wide, 14mm high, 10mm slot 12mm deep, 2mm walls and 2mm base, for 10mm panels\" width=\"1000\" height=\"745\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits sheet, plate, glass and panel edges 10mm thick\u003c\/li\u003e\n\u003cli\u003e14mm wide x 14mm high, 10mm slot 12mm deep\u003c\/li\u003e\n\u003cli\u003eUniform 2mm walls and base: even stiffness on every face\u003c\/li\u003e\n\u003cli\u003e12mm gripping arms hold each face, so adhesive is rarely needed\u003c\/li\u003e\n\u003cli\u003eFlat 14mm top gives a crisp, square edge line\u003c\/li\u003e\n\u003cli\u003e60 Shore A TPE: resists UV, weathering, chemicals and repeated flexing\u003c\/li\u003e\n\u003cli\u003eLight at 67g per metre; cuts cleanly with a knife; fully recyclable\u003c\/li\u003e\n\u003cli\u003eBlack, 25m coil, about £19.66 per metre inc VAT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapping sharp edges on 10mm steel and aluminium plate and fabrications\u003c\/li\u003e\n\u003cli\u003eEdge finish on 10mm toughened glass, acrylic and polycarbonate screens\u003c\/li\u003e\n\u003cli\u003eMachine guards, vending machines, kiosks and display cabinets\u003c\/li\u003e\n\u003cli\u003eRunning boards, steps and stair-edge panels\u003c\/li\u003e\n\u003cli\u003eFurniture, worktop and shopfitting panels in 10mm board\u003c\/li\u003e\n\u003cli\u003eProtecting plate and sheet stock edges during handling and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-square-u-channel-14mm-x-14mm-fitted-on-10mm-panel.png?v=1795309906\" alt=\"Illustration: TPE square U channel 14mm x 14mm pushed onto a 10mm panel edge, gripping 12mm of each face\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure the thickness of the edge and match it to the slot. A square U channel should fit snugly: on a thinner panel it sits loose, on a thicker one it splays the arms. Several of our trims fit 10mm material; they differ in face size and wall weight.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eFits panel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eChoose it when\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14mm x 14mm (this item)\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003eyou want a compact, even square look\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-16mm-x-18mm-for-10mm-panels-25m-coil\"\u003e16mm x 18mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003eyou want a larger face and deeper grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-22mm-x-12mm-25m-coil\"\u003e22mm x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8–10mm\u003c\/td\u003e\n\u003ctd\u003eyou want a wide, low profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-heavy-duty-for-10mm-panels-22mm-x-52mm-x-25m-coil\"\u003e22mm x 52mm heavy duty\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003ethe edge takes heavy impacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-12mm-x-12mm-for-8mm-panels-25m-coil\"\u003e12mm x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003ethe panel is 8mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTest method \/ source\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSquare U channel (parallel-sided slot, flat top)\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e14.0 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e14.0 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot width\u003c\/td\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth (gripping arm length)\u003c\/td\u003e\n\u003ctd\u003e12.0 mm (14mm height less 2mm base)\u003c\/td\u003e\n\u003ctd\u003eDerived from supplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e2.0 mm, uniform\u003c\/td\u003e\n\u003ctd\u003eSupplier page and drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness (above slot)\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel \/ edge thickness it fits\u003c\/td\u003e\n\u003ctd\u003e10 mm (clamping range 10mm to 10mm)\u003c\/td\u003e\n\u003ctd\u003eSupplier page \/ datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer (TPE)\u003c\/td\u003e\n\u003ctd\u003eSupplier datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eSupplier datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A durometer (supplier datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e67 g per metre (about 1.7 kg per 25m coil)\u003c\/td\u003e\n\u003ctd\u003eSupplier datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse temperature\u003c\/td\u003e\n\u003ctd\u003e-25°C to +70°C (datasheet and technical data); the supplier's feature list quotes -40°C to +90°C\u003c\/td\u003e\n\u003ctd\u003eSupplier datasheet \/ page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum bend radius\u003c\/td\u003e\n\u003ctd\u003e200 mm (250 mm for the tightest edge-wise bend)\u003c\/td\u003e\n\u003ctd\u003eSupplier datasheet diagram\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1, class E2 (cross-section) \/ L2 (length)\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil length\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity, tensile strength, elongation, tear, compression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial and compliance\u003c\/h3\u003e\n\u003cp\u003eThermoplastic elastomer combines the flexibility of rubber with the processing of a plastic. It springs back after being stretched or squeezed, so the arms keep their grip on the panel over time and the trim can be removed and refitted. It has good resistance to weathering, UV, chemicals, tear and abrasion, good resistance to flex fatigue, and is 100% recyclable.\u003c\/p\u003e\n\u003cp\u003eNo food-contact, fire or other approvals (FDA, EC 1935\/2004, WRAS, UL 94, REACH or RoHS) are stated for this profile, so we do not claim any. Ask us before using it where a certificate is required.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the length of every edge you want to cover, add about 5% for corners and offcuts, then divide by 25. For example, six 10mm guard panels each 1000mm x 600mm have 3.2m of edge each, 19.2m in total; with 5% added that is about 20m, so one 25m coil with a few metres to spare.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck the panel is 10mm thick before ordering.\u003c\/li\u003e\n\u003cli\u003eWipe the edge with a degreaser and de-burr it so the trim slides on and grips evenly.\u003c\/li\u003e\n\u003cli\u003eStart at one end and push the channel on by hand; tap it home with a rubber mallet if needed.\u003c\/li\u003e\n\u003cli\u003eMitre the channel at sharp corners, or cut a small V-notch in the base to bend it round.\u003c\/li\u003e\n\u003cli\u003eAdd a thin bead of adhesive in the slot only where there is heavy vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003e10mm. The slot is 10.0mm wide and the datasheet gives a clamping range of 10mm to 10mm, so it is made for that one thickness. On thinner material it will sit loose; on 8mm sheet choose the 12mm x 12mm channel instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need adhesive?\u003c\/strong\u003e\u003cbr\u003eUsually not. The 12mm arms grip each face firmly. A thin bead of adhesive is only worth adding on vibrating machinery or where the trim could be pulled off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners?\u003c\/strong\u003e\u003cbr\u003eIt bends round gentle curves; the datasheet gives a minimum radius of 200mm, or 250mm for the tightest edge-wise bend. For square corners, mitre-cut the trim at 45° or cut a V-notch in the base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut with a sharp knife, shears or a fine-toothed saw for a square end. Butt the ends together tightly; a drop of cyanoacrylate (superglue) makes a neat permanent joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors, and how hot can it get?\u003c\/strong\u003e\u003cbr\u003eYes, TPE resists UV light, weathering and many chemicals. For long-term use keep it within the datasheet range of -25°C to +70°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is TPE and how does it differ from rubber?\u003c\/strong\u003e\u003cbr\u003eTPE is a thermoplastic elastomer: it behaves like a soft rubber in use but can be melted and recycled. At 60 Shore A it is firm enough to hold its square shape and soft enough to cushion knocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for glass?\u003c\/strong\u003e\u003cbr\u003eYes. It is commonly used to cover the edges of 10mm toughened glass, acrylic and polycarbonate screens, protecting both the panel and the people handling it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow quickly will it arrive?\u003c\/strong\u003e\u003cbr\u003eThis trim is held in stock and ships from our UK warehouse; see the dispatch message above the basket button for today's cut-off.\u003c\/p\u003e\n\u003cp\u003eNot sure which profile suits your panel? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e with the panel thickness, or call +44 1282 277786, and we will point you to the right channel.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"25m coil","offer_id":56589644792187,"sku":"IP-TPEU-14X14X10-STD","price":491.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-square-u-channel-14mm-x-14mm-end-view-black.png?v=1795309906","url":"https:\/\/industrial-polymers.co.uk\/products\/tpe-square-u-channel-14mm-x-14mm-profile-for-10mm-panels-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}