{"product_id":"tpe-square-u-channel-8mm-x-12mm-for-4mm-panels-25m-coil","title":"TPE Square U Channel – 8mm x 12mm for 4mm Panels – 25m Coil","description":"\u003cp\u003eA compact, square-section push-on trim for capping the raw edges of 4mm sheet. The profile is 8mm wide and 12mm high, with a 4mm parallel slot running 10mm deep. Both walls and the base are a full 2mm thick, so the trim stays rigid and absorbs knocks without crushing, while the 10mm sides grip each face of the panel firmly, usually with no adhesive. It is extruded from black 60 Shore A thermoplastic elastomer (TPE), supplied as one continuous 25m coil, and held in stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-square-u-channel-8mm-x-12mm-technical-drawing.png?v=1795129310\" alt=\"Technical drawing of TPE square U channel 8mm x 12mm cross-section: 8mm wide, 12mm high, 4mm slot 10mm deep, 2mm walls and 2mm base, for 4mm panels\" width=\"1000\" height=\"745\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits sheet and panel edges 4mm thick\u003c\/li\u003e\n\u003cli\u003e8mm wide x 12mm high, 4mm slot 10mm deep\u003c\/li\u003e\n\u003cli\u003eUniform 2mm walls and base: rigid, impact-absorbing and hard to crush\u003c\/li\u003e\n\u003cli\u003e10mm gripping arms hold each face, so glue is rarely needed\u003c\/li\u003e\n\u003cli\u003eFlat, square 8mm top gives a neat, low-profile finished edge\u003c\/li\u003e\n\u003cli\u003e60 Shore A TPE: resists UV, weathering, chemicals and repeated flexing\u003c\/li\u003e\n\u003cli\u003eCuts cleanly with a knife; fully recyclable thermoplastic\u003c\/li\u003e\n\u003cli\u003eBlack, 25m coil, about £19.18 per metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapping sharp edges on 4mm sheet-metal machine guards, covers and enclosure panels\u003c\/li\u003e\n\u003cli\u003eEdge finish on 4mm glazing, acrylic and polycarbonate screens\u003c\/li\u003e\n\u003cli\u003eVending machine, kiosk and display cabinet panels\u003c\/li\u003e\n\u003cli\u003eFurniture, shelving and stair-edge panels\u003c\/li\u003e\n\u003cli\u003eRunning boards and light vehicle or trailer panels\u003c\/li\u003e\n\u003cli\u003eProtecting sheet stock edges during handling and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-square-u-channel-8mm-x-12mm-fitted-on-4mm-panel.png?v=1795129311\" alt=\"Fitting illustration: TPE square U channel 8mm x 12mm pushed onto a 4mm panel edge, gripping 10mm of each face\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003cp\u003eMeasure the edge you want to cover and match it to the slot. A square U channel should fit the panel snugly: too thin and it sits loose, too thick and it splays the arms.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eU channel\u003c\/th\u003e\n\u003cth\u003eFits edge thickness\u003c\/th\u003e\n\u003cth\u003eChoose it when\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-6mm-x-12mm-25m-coil\"\u003eTPE Square U Channel 6mm x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003ctd\u003eYour sheet is 2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-7mm-x-12mm-for-3mm-panels-25m-coil\"\u003eTPE Square U Channel 7mm x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003ctd\u003eYour sheet is 3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTPE Square U Channel 8mm x 12mm (this one)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003ctd\u003eYou want a compact 12mm-high trim on 4mm sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-12mm-x-16mm-for-4mm-panels-50m-coil\"\u003eTPE Square U Channel 12mm x 16mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003ctd\u003eYou want a bigger, heavier-walled 4mm trim on a 50m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-9mm-x-16mm-for-5mm-panels-25m-coil\"\u003eTPE Square U Channel 9mm x 16mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003ctd\u003eYour sheet is 5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-12mm-x-14mm-for-6mm-panels-25m-coil\"\u003eTPE Square U Channel 12mm x 14mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003ctd\u003eYour sheet is 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eProfile and dimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSquare-section U channel (push-on edge trim)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e8.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, ISO 3302-1 class E2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e12.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, ISO 3302-1 class E2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot width\u003c\/td\u003e\n\u003ctd\u003e4.0 mm, parallel sides\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth (gripping arm length)\u003c\/td\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e2.0 mm each side\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness under slot\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal (12 mm height less 10 mm arms)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits edge \/ panel (clamping range)\u003c\/td\u003e\n\u003ctd\u003e4 mm only\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eCross-section class E2, length class L2 (quality level 2)\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e54 g per metre, approx. 1.35 kg per 25 m coil\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer (TPE)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A durometer (ISO 48-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-25 °C to +70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet (a wider -40 °C to +90 °C is also quoted; we list the more cautious datasheet figure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eUV, weathering, chemicals, flex fatigue; good tear and abrasion resistance\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity, tensile strength, elongation, tear, compression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile; ask us if you need them\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003eOne continuous 25 m coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eHeld in stock\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial and compliance\u003c\/h3\u003e\u003cp\u003eTPE is a rubber-like material that is processed like a plastic. It gives a consistent, rubbery feel, needs no vulcanising, and can be recycled at end of life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeathering:\u003c\/strong\u003e stable in sunlight and outdoor conditions, and resists ageing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance:\u003c\/strong\u003e stands up to water, mild cleaning agents and general workshop exposure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerances:\u003c\/strong\u003e extruded to ISO 3302-1, the standard tolerance scheme for rubber and elastomer extrusions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo food-contact, potable-water (WRAS), REACH\/RoHS or fire-rating approval is claimed for this profile. If you need a declaration for your file, \u003ca href=\"\/pages\/contact\"\u003econtact our team\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\u003cp\u003eTotal the length of every edge you want to cover and add about 5% for trimming. Example: twenty 600mm x 400mm guard panels trimmed on all four sides have 40m of edge, or 42m with allowance, so order two 25m coils. Ten of the same panels (20m, 21m with allowance) fit on one coil.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCheck the panel really is 4mm: thinner sheet will sit loose, thicker sheet will splay the arms\u003c\/li\u003e\n\u003cli\u003eDeburr the edge and wipe it free of oil and grease before fitting\u003c\/li\u003e\n\u003cli\u003eStart at one end and press the channel on with your thumb as you work along; a soft mallet helps on long runs\u003c\/li\u003e\n\u003cli\u003ePush the channel down until the panel edge seats against the base of the slot\u003c\/li\u003e\n\u003cli\u003eCut slightly over length with a sharp knife and push the ends together for a tight joint\u003c\/li\u003e\n\u003cli\u003eEase it round gentle curves; on a tight corner, mitre it or cut a V-notch in the base\u003c\/li\u003e\n\u003cli\u003eFor a permanent or vibration-proof fit, add a thin bead of sealant or adhesive in the slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat edge thickness does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is made for 4mm edges only. For 3mm sheet choose the 7mm x 12mm square U channel; for 5mm sheet choose the 9mm x 16mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it differ from the 12mm x 16mm version?\u003c\/strong\u003e\u003cbr\u003eBoth fit 4mm edges. This one is smaller and lighter, with an 8mm face and 10mm arms, for a neat low-profile edge. The 12mm x 16mm is a heavier, more protective trim sold on a 50m coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eNot usually. The 10mm sides grip a clean 4mm edge firmly on their own. Add adhesive only where there is heavy traffic, vibration, or you want it permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go round curves and corners?\u003c\/strong\u003e\u003cbr\u003eIt follows gentle curves. For a tight 90° corner, mitre the channel or notch the base so it folds neatly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors, and what temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eYes. TPE resists UV and weathering. The datasheet working range is -25°C to +70°C, so keep it away from ovens, exhausts and other hot surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eA sharp knife or snips gives a clean square cut. Butt the ends tightly; for a sealed joint, add a dab of instant adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eBlack thermoplastic elastomer (TPE) at 60 Shore A: firm enough to protect, soft enough to push on by hand, and fully recyclable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe?\u003c\/strong\u003e\u003cbr\u003eNo food-contact approval is claimed for this black TPE trim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe cross-section is extruded to ISO 3302-1 class E2, so allow a few tenths of a millimetre either way on the nominal sizes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen will it ship?\u003c\/strong\u003e\u003cbr\u003eThis trim is held in stock and ships in line with the dispatch times shown on this page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy a shorter length?\u003c\/strong\u003e\u003cbr\u003eThis listing is a full 25m coil in black. For cut lengths or larger quantities, \u003ca href=\"\/pages\/contact\"\u003eask our team for a quote\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing an edge trim? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e on +44 1282 277786 or sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"25m coil","offer_id":56590477427067,"sku":"IP-TPEU-8X12X4-STD","price":479.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-square-u-channel-8mm-x-12mm-black-25m.png?v=1795129311","url":"https:\/\/industrial-polymers.co.uk\/products\/tpe-square-u-channel-8mm-x-12mm-for-4mm-panels-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}