{"product_id":"tpe-u-channel-4mm-x-23mm-25m-coil","title":"TPE U Channel – 4mm x 23mm Deep Grip for 2mm Panels – 25m Coil","description":"\u003cp\u003eA slim black TPE U channel with unusually long gripping arms, made to protect and finish the edges of 2mm sheet: steel and aluminium panels, machine guards, glazing, acrylic and polycarbonate. It is only 4mm thick across the edge but 23mm tall, and the two arms grip 22mm down each face of the sheet. The arms are moulded angled inward, so they spring apart as the sheet goes in and clamp it along their full length. That wide grip holds by itself on most clean 2mm edges, so adhesive is usually not needed. Made from 60 Shore A thermoplastic elastomer and supplied as one continuous 25m coil.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-4mm-x-23mm-technical-drawing.png?v=1794992306\" alt=\"Technical drawing of TPE U channel 4mm x 23mm cross-section: 4mm wide, 23mm high, 2mm slot at the base, 22mm gripping arms, 1mm walls and base\" width=\"1000\" height=\"745\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits sheet and panels 2mm thick\u003c\/li\u003e\n\u003cli\u003e4mm wide x 23mm high, 2mm slot with 22mm deep gripping arms, 1mm walls\u003c\/li\u003e\n\u003cli\u003eLow profile: adds only about 1mm to each face of the sheet\u003c\/li\u003e\n\u003cli\u003eThermoplastic elastomer (TPE), 60 Shore A\u003c\/li\u003e\n\u003cli\u003eTemperature range -40°C to +90°C, indoors or outdoors\u003c\/li\u003e\n\u003cli\u003eResists weathering, ageing, chemicals, flex fatigue, tearing and abrasion\u003c\/li\u003e\n\u003cli\u003eCuts cleanly with a sharp knife; 100% recyclable thermoplastic\u003c\/li\u003e\n\u003cli\u003e25m coil in black, about £18.72 per metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapping the raw edges of 2mm steel or aluminium machine guards, covers and enclosure panels\u003c\/li\u003e\n\u003cli\u003eProtecting the edges of 2mm sheets during storage, handling and transport, and protecting people from the sharp edges\u003c\/li\u003e\n\u003cli\u003eFinishing the edges of thin glazing, acrylic and polycarbonate panels in screens, cabinets and displays\u003c\/li\u003e\n\u003cli\u003eEdge trim for running boards, steps and stair panels\u003c\/li\u003e\n\u003cli\u003eBumper edging on furniture, shop-fitting and vending or kiosk panels\u003c\/li\u003e\n\u003cli\u003eWhere sheets are stacked close together: the 4mm profile takes up little space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003cp\u003eMeasure the thickness of the edge you are covering and pick the channel whose slot matches it. Choose this one when you want a deep, wide grip on 2mm sheet with a very thin profile.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eU channel\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eFits edge thickness\u003c\/th\u003e\n\u003cth\u003eGrip depth\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTPE U Channel 4mm x 23mm (this one)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTPE, black\u003c\/td\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003ctd\u003e22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/deep-u-channel-6-x-25mm-2mm-slot-irs1022n-black-neoprene-per-metre\"\u003eDeep U Channel 6 x 25mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eNeoprene, black\u003c\/td\u003e\n\u003ctd\u003eup to 2mm\u003c\/td\u003e\n\u003ctd\u003edeep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-edge-protection-9mm-x-13mm-x-100m-coil-for-1mm-to-2-5mm-panels\"\u003eTPE U Channel 9mm x 13mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTPE\u003c\/td\u003e\n\u003ctd\u003e1mm to 2.5mm\u003c\/td\u003e\n\u003ctd\u003eshallow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-8-5mm-x-12mm-for-1mm-to-3mm-panels-100m-coil\"\u003eTPE U Channel 8.5mm x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTPE\u003c\/td\u003e\n\u003ctd\u003e1mm to 3mm\u003c\/td\u003e\n\u003ctd\u003eshallow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-3mm-x-7mm-25m-coil\"\u003eTPE U Channel 3mm x 7mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTPE\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003ctd\u003eabout 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eProfile and dimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eRound-bottom U channel with long, inward-angled gripping arms (push-on edge trim)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, measured across the base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e23 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot (grip) width\u003c\/td\u003e\n\u003ctd\u003e2 mm at the base, narrowing to approx. 0.5 mm at the lips when unfitted\u003c\/td\u003e\n\u003ctd\u003eNominal at base; lip gap scaled from profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGripping arm length \/ slot depth\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003ctd\u003eNominal (23 mm height less 22 mm arms)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits panel \/ edge\u003c\/td\u003e\n\u003ctd\u003e2 mm only\u003c\/td\u003e\n\u003ctd\u003eManufacturer's clamping range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2 (cross-section), L2 (length)\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer (TPE)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A durometer (ISO 48-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum service temperature\u003c\/td\u003e\n\u003ctd\u003e-40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum service temperature\u003c\/td\u003e\n\u003ctd\u003e+90 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003eWeathering, ageing, general chemicals, flex fatigue, tear, abrasion\u003c\/td\u003e\n\u003ctd\u003eManufacturer's description (qualitative)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity, tensile strength, elongation, tear strength, compression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if your specification needs them\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003eOne continuous 25 m coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eIP-TPEU-4X23X2-STD\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial and compliance\u003c\/h3\u003e\n\u003cp\u003eThis channel is extruded from a thermoplastic elastomer (TPE): a rubber-like material that flexes and recovers like rubber but, unlike vulcanised rubber, can be melted down and recycled. It stays elastic from -40°C to +90°C, resists weathering and ageing outdoors, and keeps its clamping force after repeated flexing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional tolerances:\u003c\/strong\u003e extruded to ISO 3302-1, cross-section class E2 and length class L2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecyclable:\u003c\/strong\u003e the manufacturer states the material is 100% recyclable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo product approvals are stated\u003c\/strong\u003e for this profile: it is not offered as food-contact, drinking-water (WRAS) or fire-rated material. Ask us if you need an approved alternative.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\u003cp\u003eAdd up every edge you want to cover and allow around 5% for trimming and joints. Example: twelve 2mm steel guard panels, each with two exposed 1m edges, need 24m, or about 25.2m with allowance. One 25m coil covers almost all of them; order two for the full set with spare.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDeburr the edge and wipe it with a degreaser first: the arms grip much better on a clean edge\u003c\/li\u003e\n\u003cli\u003eStart at one end, open the lips onto the edge and press the channel home with your thumb as you go; a rubber mallet helps on long runs\u003c\/li\u003e\n\u003cli\u003eCheck the sheet reaches the bottom of the slot, so the full 22mm of each arm is gripping\u003c\/li\u003e\n\u003cli\u003eCut slightly over length with a sharp knife and push the ends together for a tight butt joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stay on without glue?\u003c\/strong\u003e\u003cbr\u003eOn a clean 2mm edge, yes in most cases. The arms grip 22mm down each face and are angled inward, so they clamp along their whole length. For edges that are knocked often, or for a permanent fit, run a thin bead of flexible adhesive in the slot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit 1.5mm or 3mm sheet?\u003c\/strong\u003e\u003cbr\u003eIt is made for 2mm only. On 1.5mm the arms still close on the sheet but the grip is weaker, so use adhesive. 3mm sheet is too thick and will force the arms apart; choose the TPE U channel 8.5mm x 12mm for 1mm to 3mm panels instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it so tall for such a thin channel?\u003c\/strong\u003e\u003cbr\u003eThe 22mm arms give a far bigger gripping area than a standard U channel, so it holds securely without adhesive while adding only about 1mm to each face. That suits sheets that are stacked or fitted in tight spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go round corners and curves?\u003c\/strong\u003e\u003cbr\u003eIt follows gentle curves along its length. Because the arms are deep, it will not bend round a tight curve in the plane of the sheet; for a 90° corner, mitre the ends and butt two lengths together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003e-40°C to +90°C. It stays flexible in winter outdoors and is fine on equipment that runs warm, but keep it away from hot surfaces above 90°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003cbr\u003eYes. TPE resists weathering and ageing, so it can be used on outdoor panels, steps and running boards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut square with a sharp knife or fine shears. Join lengths with a tight butt joint; a drop of flexible adhesive at the joint stops it opening up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on food equipment?\u003c\/strong\u003e\u003cbr\u003eNo food-contact approval is stated for this profile, so we do not recommend it where it may touch food. Ask us for an approved silicone channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy a shorter length or other colours?\u003c\/strong\u003e\u003cbr\u003eThis listing is a full 25m coil in black. For cut lengths or larger quantities, \u003ca href=\"\/pages\/contact\"\u003eask our team for a quote\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing an edge trim or a seal? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56588868616571,"sku":"IP-TPEU-4X23X2-STD","price":468.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-4mm-x-23mm-black.png?v=1794992308","url":"https:\/\/industrial-polymers.co.uk\/products\/tpe-u-channel-4mm-x-23mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}