{"product_id":"tpe-u-channel-8-4mm-x-20mm-for-1-5mm-panels-50m-coil","title":"TPE U Channel – 8.4mm x 20mm for 1.5mm Panels – 50m Coil","description":"\u003cp\u003eA deep, tapered black TPE U channel that pushes onto \u003cstrong\u003e1.5mm\u003c\/strong\u003e sheet and panel edges. The 15mm-deep slot grips the edge without glue, and the thick 8.4mm rounded base takes the knocks so the edge, and the people working near it, don't. Supplied as one continuous \u003cstrong\u003e50m coil\u003c\/strong\u003e (about £12.26 per metre inc VAT), held in stock in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8.4mm wide x 20mm high, tapered U with a solid round base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1.5mm edges (manufacturer's datasheet: 1mm to 1.5mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e 1.5mm slot, 15mm deep, so 15mm of each face is covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e thermoplastic elastomer (TPE), 60 Shore A, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-on:\u003c\/strong\u003e no adhesive needed in normal use; removable and re-fittable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts cleanly\u003c\/strong\u003e with a knife or shears; offcuts are recyclable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8-4mm-x-20mm-technical-drawing.png\" alt=\"Technical drawing of TPE U channel 8.4 x 20 mm with all dimensions in mm\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eSource \/ test method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eTapered U channel, solid round base\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (max., at base)\u003c\/td\u003e\n\u003ctd\u003e8.4 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data (datasheet drawing shows 8.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e20.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot width\u003c\/td\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth (grip on each face)\u003c\/td\u003e\n\u003ctd\u003e15.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid base below slot\u003c\/td\u003e\n\u003ctd\u003e5.0 mm (20 − 15)\u003c\/td\u003e\n\u003ctd\u003eDerived from the two dimensions above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth at the lips\u003c\/td\u003e\n\u003ctd\u003e≈ 4.5 mm\u003c\/td\u003e\n\u003ctd\u003eScaled from the manufacturer's drawing, not a stated dimension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e1 mm (as listed by the manufacturer; position not defined)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's technical data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel \/ edge thickness it fits\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (datasheet clamping range 1 – 1.5 mm)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data and datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer (TPE)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet (Shore A durometer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse temperature (design range)\u003c\/td\u003e\n\u003ctd\u003e−25 °C to +70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature, web listing\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +90 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product page (wider than the datasheet; we quote the datasheet figure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1 class E2 (cross-section) \/ L2 (length)\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50 m continuous coil\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight per metre\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity, tensile strength, elongation, tear, compression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need a material certificate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis profile is made from a black thermoplastic elastomer (TPE) at 60 Shore A: firm enough to hold its shape and resist impact, flexible enough to follow gentle curves. The manufacturer describes the material as having good resistance to flex fatigue, tearing, abrasion and many chemicals, and as 100% recyclable.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any food-contact (FDA, EC 1935\/2004), WRAS, REACH or RoHS approval for this product, so we make no such claim. If your application needs a declaration, contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8-4mm-x-20mm-fitted-on-1-5mm-panel.png\" alt=\"TPE U channel 8.4 x 20 mm pushed onto a 1.5 mm panel edge\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDeburr the edge and wipe off oil or grease so the slot can seat fully.\u003c\/li\u003e\n\u003cli\u003eStart at one end and press the trim down onto the edge with your thumb or a rubber mallet, working along. Don't stretch it as you go, or it will shrink back and leave gaps.\u003c\/li\u003e\n\u003cli\u003eCut square with a sharp knife or shears. On outside corners, mitre at 45° or cut a V-notch out of the base and bend it round.\u003c\/li\u003e\n\u003cli\u003eWhere there is heavy vibration, run a thin bead of contact adhesive in the slot.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eShown to scale\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8-4mm-x-20mm-to-scale-on-machine-guard.png\" alt=\"TPE U channel 8.4 x 20 mm shown to scale on a 600 mm machine guard panel\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSafety edging on 1.5mm sheet metal guards, enclosures, cabinets and fabrications\u003c\/li\u003e\n\u003cli\u003eFinishing thin glazing and panel edges\u003c\/li\u003e\n\u003cli\u003eRunning boards, stair and step edges\u003c\/li\u003e\n\u003cli\u003eFurniture and display panel edges\u003c\/li\u003e\n\u003cli\u003eVending machine and kiosk panels\u003c\/li\u003e\n\u003cli\u003eProtecting sheet edges in storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the edge length and allow about 5% for cutting. Example: 30 guard panels with a 900mm top edge = 27m, or about 28.4m with the allowance. One 50m coil covers it with around 21m to spare.\u003c\/p\u003e\n\n\u003ch3\u003eOther sizes for thin edges\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eEdge it fits\u003c\/th\u003e\n\u003cth\u003eChoose it for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-4-5mm-x-8mm-100m-coil\"\u003e4.5 x 8mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003ctd\u003eSmall, neat trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-4-5mm-x-12mm-50m-coil\"\u003e4.5 x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003ctd\u003eSlim trim, deeper grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-5-6mm-x-9-8mm-50m-coil\"\u003e5.6 x 9.8mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003ctd\u003eMid-size trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e8.4 x 20mm (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003ctd\u003eDeepest grip and a thick cushioned edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-6mm-x-23-5mm-25m-coil\"\u003e6 x 23.5mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1 – 3mm\u003c\/td\u003e\n\u003ctd\u003eVery deep grip, slimmer edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-10mm-x-21mm-for-2-5mm-panels-50m-coil\"\u003e10 x 21mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003ctd\u003eSlightly thicker sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-8-5mm-x-25mm-for-4mm-panels-25m-coil\"\u003e8.5 x 25mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003ctd\u003eThicker panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is made for 1.5mm edges. The manufacturer's datasheet gives a clamping range of 1mm to 1.5mm, so it will also hold on 1mm sheet, though less tightly. For 2.5mm sheet use the 10 x 21mm size; for 4mm, the 8.5 x 25mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot usually. The 15mm-deep slot grips both faces of the edge. Use a thin bead of contact adhesive only where there is strong vibration or frequent knocks along the length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure what I need?\u003c\/strong\u003e\u003cbr\u003eMeasure your edge thickness with calipers (it should be 1 – 1.5mm), then the total edge length, plus about 5% for cutting. The trim adds 8.4mm to the edge width and sits 5mm proud of the edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut with a sharp knife, shears or a fine-toothed saw. Mitre corners at 45°, or notch the base for gentle bends. Butt joints can be closed with a drop of cyanoacrylate (superglue) suitable for rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer's datasheet gives −25 °C to +70 °C. Their web page quotes −40 °C to +90 °C; we recommend designing to the datasheet range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e\u003cbr\u003eTPE copes well with weather and flexing. For long-term outdoor use in strong sun, ask us and we'll suggest an EPDM option if one suits better.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or certified?\u003c\/strong\u003e\u003cbr\u003eNo food-contact or other approvals are stated for this profile, so don't use it where food contact certification is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get a shorter length or another colour?\u003c\/strong\u003e\u003cbr\u003eThis listing is a 50m black coil. Contact us for cut lengths or other options.\u003c\/p\u003e\n\n\u003cp\u003eNeed help choosing? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"50m coil","offer_id":56589876003195,"sku":"IP-TPEU-8.4X20X1.5-STD","price":612.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8-4mm-x-20mm-for-1-5mm-panels-50m-coil-studio.jpg?v=1795012557","url":"https:\/\/industrial-polymers.co.uk\/products\/tpe-u-channel-8-4mm-x-20mm-for-1-5mm-panels-50m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}