{"product_id":"tpe-u-channel-8-5mm-x-25mm-for-4mm-panels-25m-coil","title":"TPE U Channel – 8.5mm x 25mm for 4mm Panels – 25m Coil","description":"\u003cp\u003eA deep black TPE U channel that pushes onto \u003cstrong\u003e4mm\u003c\/strong\u003e sheet, glass and panel edges. Its long parallel arms run about 22.7mm down each face, so it grips firmly without glue in most uses, and the 8.5mm rounded bead takes knocks so the edge, and the people working near it, don't. Supplied as one continuous \u003cstrong\u003e25m coil\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8.5mm wide x 25mm high, deep U with parallel arms and a round base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 4mm edges only (4mm slot)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e about 22.7mm of each face covered, one of the deepest grips in our range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e thermoplastic elastomer (TPE), 60 Shore A, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 120 g per metre, about 3 kg per 25m coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-on:\u003c\/strong\u003e no adhesive needed in normal use; removable and re-fittable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts cleanly\u003c\/strong\u003e with a knife or shears; offcuts are recyclable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8-5mm-x-25mm-technical-drawing.png?v=1795129920\" alt=\"Technical drawing of TPE U channel 8.5 x 25 mm with all dimensions in mm\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eSource \/ test method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eDeep U channel, parallel arms, round base\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e8.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e25.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot width\u003c\/td\u003e\n\u003ctd\u003e4.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall (arm) thickness\u003c\/td\u003e\n\u003ctd\u003e2 mm stated (\"just over 2 mm\"); 2.25 mm from (8.5 − 4) ÷ 2\u003c\/td\u003e\n\u003ctd\u003eManufacturer's technical data; derived from the drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth (grip on each face)\u003c\/td\u003e\n\u003ctd\u003e≈ 22.75 mm\u003c\/td\u003e\n\u003ctd\u003eDerived: 25 mm height less a ≈2.25 mm base; not a stated dimension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase outer radius\u003c\/td\u003e\n\u003ctd\u003e≈ 4.25 mm (full round)\u003c\/td\u003e\n\u003ctd\u003eDerived from the drawing (half the 8.5 mm width)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel \/ edge thickness it fits\u003c\/td\u003e\n\u003ctd\u003e4 mm only (clamping range 4 mm to 4 mm)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data and datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer (TPE)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet (Shore A durometer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight per metre\u003c\/td\u003e\n\u003ctd\u003e120 g\/m (≈ 3.0 kg per 25 m coil)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse temperature (design range)\u003c\/td\u003e\n\u003ctd\u003e−25 °C to +70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature, web listing\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +90 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product page (wider than the datasheet; we quote the datasheet figure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1 class E2 (cross-section) \/ L2 (length)\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1 (datasheet: quality level 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e25 m continuous coil\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity, tensile strength, elongation, tear, compression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need a material certificate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis profile is made from a black thermoplastic elastomer (TPE) at 60 Shore A: firm enough to hold its shape and absorb impacts, flexible enough to follow gentle curves. The manufacturer describes the material as having good resistance to weathering, UV, flex fatigue, tearing, abrasion and many chemicals, and as 100% recyclable.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any food-contact (FDA, EC 1935\/2004), WRAS, REACH or RoHS approval for this product, so we make no such claim. If your application needs a declaration, contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8-5mm-x-25mm-fitted-on-4mm-panel.png?v=1795129921\" alt=\"TPE U channel 8.5 x 25 mm pushed onto a 4 mm panel edge\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCheck the edge is 4mm thick. Deburr it and wipe off oil or grease so the slot can seat fully.\u003c\/li\u003e\n\u003cli\u003eStart at one end and press the trim down onto the edge with your thumb or a rubber mallet, working along. Don't stretch it as you go, or it will shrink back and leave gaps.\u003c\/li\u003e\n\u003cli\u003eCut square with a sharp knife or shears. On outside corners, mitre at 45° or cut a V-notch out of the arms and bend it round.\u003c\/li\u003e\n\u003cli\u003eWhere there is heavy vibration, run a thin bead of contact adhesive in the slot.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eShown to scale\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8-5mm-x-25mm-to-scale-on-machine-guard.png?v=1795129921\" alt=\"TPE U channel 8.5 x 25 mm shown to scale on a 600 mm machine guard panel\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSafety edging on 4mm sheet metal guards, enclosures and fabrications\u003c\/li\u003e\n\u003cli\u003eFinishing 4mm glass, polycarbonate and acrylic panel edges\u003c\/li\u003e\n\u003cli\u003eRunning boards, stair and step edges\u003c\/li\u003e\n\u003cli\u003eFurniture, shelving and display panel edges\u003c\/li\u003e\n\u003cli\u003eVending machine and kiosk panels\u003c\/li\u003e\n\u003cli\u003eProtecting sheet edges in storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the edge length and allow about 5% for cutting. Example: 12 guard panels with a 1.8m top edge = 21.6m, or about 22.7m with the allowance. One 25m coil covers it with around 2m to spare.\u003c\/p\u003e\n\n\u003ch3\u003eOther sizes\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eEdge it fits\u003c\/th\u003e\n\u003cth\u003eChoose it for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-8-4mm-x-20mm-for-1-5mm-panels-50m-coil\"\u003eTPE U 8.4 x 20mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003ctd\u003eThin sheet, deep grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-10mm-x-21mm-for-2-5mm-panels-50m-coil\"\u003eTPE U 10 x 21mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003ctd\u003eMedium sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-7mm-x-24mm-for-3mm-panels-50m-coil\"\u003eTPE U 7 x 24mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003ctd\u003e3mm sheet, very deep grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTPE U 8.5 x 25mm (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003ctd\u003e4mm panels, deepest grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-8mm-x-12mm-for-4mm-panels-25m-coil\"\u003eTPE square U 8 x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003ctd\u003eShorter, squarer 4mm edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-12mm-x-16mm-for-4mm-panels-50m-coil\"\u003eTPE square U 12 x 16mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003ctd\u003eBulkier 4mm bumper edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-u-channel-16mm-x-21mm-profile-for-5mm-to-8mm-panels-25m-roll\"\u003eTPE U 16 x 21mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e5 – 8mm\u003c\/td\u003e\n\u003ctd\u003eThicker panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is made for 4mm edges, and the manufacturer gives the clamping range as 4mm only. On 3mm sheet it will be loose; use the 7 x 24mm size instead. For 5mm and over, see the 16 x 21mm size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot usually. The arms grip about 22.7mm down both faces of the edge. Use a thin bead of contact adhesive only where there is strong vibration or frequent knocks along the length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure what I need?\u003c\/strong\u003e\u003cbr\u003eMeasure your edge thickness with calipers (it should be 4mm), then the total edge length, plus about 5% for cutting. Fitted, the trim makes the edge 8.5mm wide and sits about 2.25mm proud of it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut with a sharp knife, shears or a fine-toothed saw. Mitre corners at 45°, or notch the arms for bends. Butt joints can be closed with a drop of cyanoacrylate (superglue) suitable for rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer's datasheet gives −25 °C to +70 °C. Their web page quotes −40 °C to +90 °C; we recommend designing to the datasheet range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it used for?\u003c\/strong\u003e\u003cbr\u003eCovering sharp 4mm edges on machine guards, glass and polycarbonate panels, shelving, running boards, steps and vending machines, and protecting sheet edges in handling and transport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e\u003cbr\u003eTPE copes well with weather, UV and flexing. For long-term exposure to strong sun or ozone, ask us and we'll suggest an EPDM option if one suits better.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or certified?\u003c\/strong\u003e\u003cbr\u003eNo food-contact or other approvals are stated for this profile, so don't use it where food-contact certification is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get a shorter length or another colour?\u003c\/strong\u003e\u003cbr\u003eThis listing is a 25m black coil. Contact us for cut lengths or other options.\u003c\/p\u003e\n\n\u003cp\u003eNeed help choosing? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"25m coil","offer_id":56589869646203,"sku":"IP-TPEU-8.5X25X4-25M","price":495.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8-5mm-x-25mm-for-4mm-panels-25m-coil-studio.jpg?v=1795012161","url":"https:\/\/industrial-polymers.co.uk\/products\/tpe-u-channel-8-5mm-x-25mm-for-4mm-panels-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}