{"product_id":"tpe-u-channel-edge-trim-7-5mm-x-12mm-50m-coil","title":"TPE U Channel Edge Trim – 7.5mm x 12mm Teardrop for 1mm Panels – Red – 50m Coil","description":"\u003cp\u003eA push-on impact edge for 1 mm sheet. This red TPE U channel has a teardrop section: 2 mm across the top, widening to a 7.5 mm rounded bulb with a 3.8 mm solid base. A 1 mm slot runs 8.2 mm deep, so the trim grips well down both faces of the sheet. Knocks land on the rubber bulb, not on the sheet edge. No adhesive is needed, and it pulls off again for reuse. Supplied as one continuous 50 m coil, held in stock.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 1 mm thick sheet only (steel, aluminium, glass, acrylic, board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSection:\u003c\/strong\u003e 7.5 mm wide × 12 mm high, teardrop U with a rounded base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e 1 mm slot, 8.2 mm deep, tapered sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e 3.8 mm of solid TPE between the sheet edge and whatever hits it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e TPE, 60 Shore A, 100% recyclable, cuts with a knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil:\u003c\/strong\u003e 50 m, works out at about £10.71 per metre inc VAT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-7-5mm-x-12mm-technical-drawing.png?v=1795078391\" alt=\"Branded technical drawing of the TPE teardrop U channel 7.5mm x 12mm with all dimensions in mm\" width=\"2000\" height=\"1490\" style=\"width:100%;height:auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eSource \/ test method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eTeardrop U channel with rounded solid base\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (widest point of bulb)\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth at top (open end)\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot width\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth (grip length on each face)\u003c\/td\u003e\n\u003ctd\u003e8.2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data (12 mm − 3.8 mm base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid base under the slot\u003c\/td\u003e\n\u003ctd\u003e3.8 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel \/ edge thickness it fits\u003c\/td\u003e\n\u003ctd\u003e1 mm only (clamping range 1 to 1 mm)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil length\u003c\/td\u003e\n\u003ctd\u003e50 m continuous\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e67 g\/m (about 3.35 kg per 50 m coil)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer (TPE), single material\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A durometer; method not stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e−25 °C to +70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's datasheet (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1, class E2 (section) \/ L2 (length)\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength \/ elongation at break\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength \/ compression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecyclability\u003c\/td\u003e\n\u003ctd\u003e100% recyclable\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e The manufacturer's sales data gives an operating range of −40 °C to +90 °C, but its datasheet for this part gives −25 °C to +70 °C. We quote the narrower datasheet figure; design to it for continuous service. The sales data lists this part as red, while the datasheet template shows black. If colour matters for your job, call us before ordering and we will confirm it against stock.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe trim is a single-material thermoplastic elastomer (TPE): rubber-like and flexible, but meltable, so offcuts can be recycled. TPE resists flexing fatigue and many chemicals well, and has good tear and abrasion resistance. Dimensions are held to ISO 3302-1 tolerance classes E2\/L2.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any food-contact, potable-water, fire or REACH\/RoHS approval for this exact part, so we do not claim one. If you need a certificate for your application, ask us before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhere it is used\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin sheet-metal panels, guards and enclosure edges\u003c\/li\u003e\n\u003cli\u003eGlass and acrylic sheet edges, including protection in transit\u003c\/li\u003e\n\u003cli\u003eVending machine and kiosk panels\u003c\/li\u003e\n\u003cli\u003eFurniture and shopfitting panels\u003c\/li\u003e\n\u003cli\u003eVehicle running boards and step edges\u003c\/li\u003e\n\u003cli\u003eStair nosings and exposed edges that people brush past\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-7-5mm-x-12mm-fitted-on-1mm-panel.png?v=1795078391\" alt=\"Fitting illustration of the TPE U channel 7.5mm x 12mm on a 1mm panel\" width=\"2000\" height=\"2000\" style=\"width:100%;max-width:640px;height:auto;\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDeburr the edge and wipe off oil or grease with a degreaser. The trim grips noticeably better on a clean, smooth edge.\u003c\/li\u003e\n\u003cli\u003eStart at one end and press the slot over the sheet, working along in short sections. Use a rubber mallet for a firm seat.\u003c\/li\u003e\n\u003cli\u003eOn outside corners, ease the trim round in a smooth curve. Do not stretch it: stretched TPE shrinks back and leaves gaps at the ends.\u003c\/li\u003e\n\u003cli\u003eCut to length with a sharp knife or trim shears, leaving the ends square for a neat butt joint.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thickness of panel does it fit?\u003c\/strong\u003e\u003cbr\u003eOnly 1 mm. The slot is 1 mm wide, so thinner sheet will be loose and thicker sheet will split or lift the trim. For 1–3 mm sheet, see the 8.5 × 12 mm TPE U channel linked below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep does it go onto the panel?\u003c\/strong\u003e\u003cbr\u003eThe slot is 8.2 mm deep, so the trim covers about 8 mm of each face of the sheet. The rounded base sits 3.8 mm beyond the edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. The tapered slot grips the sheet on its own and the trim can be pulled off and reused. On vibrating or frequently handled edges, a few dabs of a flexible adhesive in the slot will stop it creeping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eDesign to −25 °C to +70 °C, the datasheet figure. TPE gets stiffer in the cold and softer in the heat. Near the ends of that range, it grips best if fitted at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes, it is used on vehicle steps and outdoor panels. The manufacturer does not publish a UV rating for this part, so for long, continuous sun exposure ask us about alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eIt cuts cleanly with a sharp knife or shears. For a closed loop, butt the two square-cut ends tightly together; a spot of cyanoacrylate (superglue) on the ends gives a neat, permanent joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy it by the metre?\u003c\/strong\u003e\u003cbr\u003eThis listing is the full 50 m coil (about £10.71\/m inc VAT). For shorter lengths or larger quantities, call or email us for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as rubber?\u003c\/strong\u003e\u003cbr\u003eIt feels and flexes like soft rubber at 60 Shore A, but TPE is a thermoplastic, so it is recyclable and does not need vulcanising.\u003c\/p\u003e\n\u003ch3\u003eRelated TPE U channels\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tpe-u-channel-8-5mm-x-12mm-for-1mm-to-3mm-panels-100m-coil\"\u003eTPE U Channel – 8.5mm x 12mm for 1mm to 3mm panels – 100m coil\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tpe-u-channel-6mm-x-12-5mm-50m-coil\"\u003eTPE U Channel – 6mm x 12.5mm J profile for 0.5mm to 1.5mm panels – 50m coil\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tpe-u-channel-4-5mm-x-12mm-50m-coil\"\u003eTPE U Channel – 4.5mm x 12mm deep grip for 1.5mm edges – 50m coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions about fit or quantities? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"50m coil","offer_id":56590430962043,"sku":"IP-TPEU-7.5X12X1-RED","price":535.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-edge-trim-7-5mm-x-12mm-50m-coil-studio.jpg?v=1795062248","url":"https:\/\/industrial-polymers.co.uk\/products\/tpe-u-channel-edge-trim-7-5mm-x-12mm-50m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}