{"product_id":"tpe-u-channel-edge-trim-8mm-x-13mm-50m-coil","title":"TPE U Channel Edge Trim – 8mm x 13mm for 2mm Panels – 50m Coil","description":"\u003cp\u003eA black TPE teardrop U channel that pushes onto \u003cstrong\u003e2mm sheet\u003c\/strong\u003e and stays there without glue. The slot is 1mm wide at the mouth and opens to 2mm at the bottom, so the lips squeeze the panel as it goes in, and the 10mm-deep slot grips a long strip of each face. Below the slot sits a \u003cstrong\u003e3mm solid, rounded base\u003c\/strong\u003e that takes the knocks and keeps fingers, cables and other parts off a sharp edge. Supplied as one continuous \u003cstrong\u003e50m coil\u003c\/strong\u003e (works out at about £10.06 per metre inc VAT).\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2mm panels only\u003c\/strong\u003e: sheet steel, aluminium, polycarbonate, acrylic, glass and board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8mm wide x 13mm high\u003c\/strong\u003e teardrop section, round on the outside face\u003c\/li\u003e\n\u003cli\u003eTapered 1mm to 2mm slot, 10mm deep: friction grip, no adhesive needed on a clean edge\u003c\/li\u003e\n\u003cli\u003e60 Shore A TPE: firm enough to hold, soft enough to bend round curves\u003c\/li\u003e\n\u003cli\u003e59 g per metre, about 3kg for the full 50m coil\u003c\/li\u003e\n\u003cli\u003eCuts cleanly with a sharp knife or shears; 100% recyclable material\u003c\/li\u003e\n\u003cli\u003eHeld in UK stock for same-day dispatch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8mm-x-13mm-technical-drawing.png?v=1795129334\" alt=\"Technical drawing of TPE U channel 8mm x 13mm teardrop edge trim: 8mm wide, 13mm high, slot 1mm at the mouth tapering to 2mm at the base, 10mm deep, 3mm solid base, for 2mm panels\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eBasis \/ test method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eTeardrop U channel, round base\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (widest point of bulb)\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e13 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot width at mouth\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot width at base\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth (grip length)\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid base under slot\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer data (13 mm height minus 10 mm slot)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits panel \/ clamping range\u003c\/td\u003e\n\u003ctd\u003e2 mm to 2 mm (2 mm only)\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer (TPE)\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A durometer (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e59 g\/m (about 2.95 kg per 50 m coil)\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse temperature (design range)\u003c\/td\u003e\n\u003ctd\u003e−25 °C to +70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet RC234\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort-term temperature limits\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +90 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer web technical table (use the datasheet range above for design)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1 class E2 (cross-section) \/ L2 (length)\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil length\u003c\/td\u003e\n\u003ctd\u003e50 m continuous\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecyclability\u003c\/td\u003e\n\u003ctd\u003e100% recyclable\u003c\/td\u003e\n\u003ctd\u003eManufacturer statement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity, tensile strength, elongation, tear, compression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if your specification needs them\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eMade from a black thermoplastic elastomer (TPE) at 60 Shore A. TPE behaves like a rubber in use, flexing and recovering its shape after compression, but it is processed like a thermoplastic, which is why it can be fully recycled. The manufacturer states good resistance to tearing, abrasion, chemicals and repeated flexing for this profile.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any food-contact, drinking-water, fire-rating or REACH\/RoHS approval in writing for this product, so we do not claim one. If you need a certified grade, contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-8mm-x-13mm-fitted-on-2mm-panel.png?v=1795129335\" alt=\"Fitting illustration: black TPE U channel 8mm x 13mm pushed onto a 2mm panel edge, showing the 10mm grip depth and 3mm solid base\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDeburr the panel edge and wipe it with a grease remover; a clean edge grips noticeably better.\u003c\/li\u003e\n\u003cli\u003eStart at one end and press the slot over the edge by hand, working along a short length at a time.\u003c\/li\u003e\n\u003cli\u003eSeat it fully with a rubber or nylon mallet until the panel reaches the bottom of the 10mm slot.\u003c\/li\u003e\n\u003cli\u003eCut to length with a sharp knife or shears. Leave it a few millimetres long on long runs and push the ends together so they butt tightly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExposed edges of 2mm sheet-metal guards, covers and enclosures\u003c\/li\u003e\n\u003cli\u003eGlazing and polycarbonate panel edges\u003c\/li\u003e\n\u003cli\u003eRunning boards, steps and stair edges\u003c\/li\u003e\n\u003cli\u003eVending machines, kiosks and display cabinets\u003c\/li\u003e\n\u003cli\u003eFurniture and shopfitting panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy buy it from us\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeld in stock in the UK and dispatched the same day on orders placed before the cut-off\u003c\/li\u003e\n\u003cli\u003eEvery dimension published, with a drawing you can drop straight into a spec or a quote\u003c\/li\u003e\n\u003cli\u003eReal people on the phone who can check fit before you order: +44 1282 277786\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tpe-u-channel-edge-trim-7-5mm-x-12mm-50m-coil\"\u003eTPE U Channel Edge Trim 7.5mm x 12mm (for 1mm panels)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/black-pvc-self-grip-edge-trim-10-5mm-x-14-5mm-50m-coil\"\u003eBlack PVC Self-Grip Edge Trim 10.5mm x 14.5mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pvc-self-grip-edge-trim-14mm-x-16-2mm-50m-coil\"\u003ePVC Self-Grip Edge Trim 14mm x 16.2mm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a 1.5mm or 3mm panel?\u003c\/strong\u003e\u003cbr\u003eNo. The clamping range is 2mm only. On thinner sheet it will be loose and can work off; on thicker sheet it will not seat to the bottom of the slot. Call us and we will point you to the right size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot usually. The slot narrows to 1mm at the mouth, so the lips pinch a 2mm panel along the full 10mm grip. On edges that get pulled or vibrate hard, a few dots of flexible adhesive in the slot add security.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure what I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the panel thickness with calipers (it must be 2mm), then add up the length of every edge you want to cover plus about 5% for trimming. One coil covers 50 metres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners and curves?\u003c\/strong\u003e\u003cbr\u003eYes. 60 Shore A TPE bends round gentle curves without kinking. For a tight outside corner, cut a small V-notch out of the base at the bend so the trim lies flat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer's datasheet gives a working range of −25 °C to +70 °C, and its web data lists −40 °C to +90 °C as limits. Design to the datasheet range; ask us if your application runs hotter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut square with a sharp knife or shears. Butt the ends tightly together. Where a sealed join is needed, a cyanoacrylate adhesive suitable for TPE gives a neat bond.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e\u003cbr\u003eTPE has good chemical and abrasion resistance and is widely used outside, but the manufacturer does not publish UV or ozone test data for this profile. For long-term outdoor exposure, talk to us first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of, and can it be recycled?\u003c\/strong\u003e\u003cbr\u003eBlack thermoplastic elastomer (TPE). It can be re-melted, so offcuts are 100% recyclable.\u003c\/p\u003e\n\n\u003cp\u003eNot sure it is the right size? Email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e or call +44 1282 277786.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"50m coil","offer_id":56590439580027,"sku":"IP-TPEU-8X13-STD","price":502.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-u-channel-edge-trim-8mm-x-13mm-50m-coil-studio.jpg?v=1795063840","url":"https:\/\/industrial-polymers.co.uk\/products\/tpe-u-channel-edge-trim-8mm-x-13mm-50m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}