{"product_id":"watertight-hatch-seal-50mm-x-30mm-10m-or-20m-strip","title":"Watertight Hatch Seal – 50mm x 30mm – 10m or 20m Strip","description":"\u003cp\u003eThis watertight hatch seal 50mm x 30mm is a composite EPDM marine seal for hatches, cargo covers and access doors: a closed-cell sponge core gives the compression needed to stop water, while a tough solid rubber skin takes the wear of repeated opening and closing. It is sold as one continuous strip, 10m or 20m long.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHatch seal 50mm wide x 30mm high with chamfered sealing corners\u003c\/li\u003e\n\u003cli\u003eComposite marine door seal: solid EPDM skin over a closed-cell EPDM sponge core\u003c\/li\u003e\n\u003cli\u003eSponge core compresses easily for a low closing force and a watertight joint\u003c\/li\u003e\n\u003cli\u003eEPDM resists ozone, UV and weathering\u003c\/li\u003e\n\u003cli\u003eWorks from -40°C to +120°C\u003c\/li\u003e\n\u003cli\u003eSupplied as one length of 10m or 20m, so most hatches can be sealed without a joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWatertight hatches and cargo hatch covers on work boats, ferries and ships\u003c\/li\u003e\n\u003cli\u003eWeathertight access doors and inspection covers on deck\u003c\/li\u003e\n\u003cli\u003eSkylights and ullage plugs\u003c\/li\u003e\n\u003cli\u003eHatch covers on oil, gas and chemical tankers\u003c\/li\u003e\n\u003cli\u003eWeatherproof doors on offshore and dockside equipment enclosures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSeal size\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e40mm x 20mm\u003c\/td\u003e\n\u003ctd\u003eSmaller hatches and lockers with a shallow retaining channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50mm x 30mm (this seal)\u003c\/td\u003e\n\u003ctd\u003eMedium hatches, cargo covers and doors with a 50mm channel and moderate closing gap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e57mm x 32mm\u003c\/td\u003e\n\u003ctd\u003eLarger hatches and doors needing a wider seal face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70mm x 40mm\u003c\/td\u003e\n\u003ctd\u003eHeavy cargo hatch covers with a deep channel and a large compression gap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 1000 700\" width=\"100%\" role=\"img\" aria-label=\"Technical drawing: Watertight Hatch Seal 50mm x 30mm, nominal dimensions in mm\"\u003e\u003cdefs\u003e\u003cmarker id=\"ipd-15466397499771-a\" viewbox=\"0 0 10 10\" refx=\"5\" refy=\"5\" markerwidth=\"7\" markerheight=\"7\" orient=\"auto-start-reverse\"\u003e\u003cpath d=\"M0 0 L10 5 L0 10 z\" fill=\"#c2410c\"\u003e\u003c\/path\u003e\u003c\/marker\u003e\u003c\/defs\u003e\u003crect x=\"1\" y=\"1\" width=\"998\" height=\"698\" rx=\"18\" fill=\"#fff\" stroke=\"#e5e7eb\" stroke-width=\"2\"\u003e\u003c\/rect\u003e\u003cpath d=\"M110 474 L490 474 L490 299 L437 246 L163 246 L110 299 Z\" fill=\"#262626\" stroke=\"#000\" stroke-width=\"1.5\" stroke-linejoin=\"round\"\u003e\u003c\/path\u003e\u003cpath d=\"M128 456 L472 456 L472 306 L430 264 L170 264 L128 306 Z\" fill=\"#4b4b4b\" stroke=\"#000\" stroke-width=\"1\" stroke-dasharray=\"3 3\"\u003e\u003c\/path\u003e\u003cline x1=\"110\" y1=\"474\" x2=\"110\" y2=\"508\" stroke=\"#c2410c\" stroke-width=\"1\" stroke-dasharray=\"4 3\"\u003e\u003c\/line\u003e\u003cline x1=\"490\" y1=\"474\" x2=\"490\" y2=\"508\" stroke=\"#c2410c\" stroke-width=\"1\" stroke-dasharray=\"4 3\"\u003e\u003c\/line\u003e\u003cline x1=\"110\" y1=\"508\" x2=\"490\" y2=\"508\" stroke=\"#c2410c\" stroke-width=\"2\" marker-start=\"url(#ipd-15466397499771-a)\" marker-end=\"url(#ipd-15466397499771-a)\"\u003e\u003c\/line\u003e\u003crect x=\"262\" y=\"495\" width=\"76\" height=\"20\" rx=\"4\" fill=\"#fff\"\u003e\u003c\/rect\u003e\u003ctext x=\"300\" y=\"510\" font-family=\"Arial\" font-size=\"16\" font-weight=\"700\" fill=\"#c2410c\" text-anchor=\"middle\"\u003e50 mm\u003c\/text\u003e\u003cline x1=\"110\" y1=\"474\" x2=\"76\" y2=\"474\" stroke=\"#c2410c\" stroke-width=\"1\" stroke-dasharray=\"4 3\"\u003e\u003c\/line\u003e\u003cline x1=\"163\" y1=\"246\" x2=\"76\" y2=\"246\" stroke=\"#c2410c\" stroke-width=\"1\" stroke-dasharray=\"4 3\"\u003e\u003c\/line\u003e\u003cline x1=\"76\" y1=\"474\" x2=\"76\" y2=\"246\" stroke=\"#c2410c\" stroke-width=\"2\" marker-start=\"url(#ipd-15466397499771-a)\" marker-end=\"url(#ipd-15466397499771-a)\"\u003e\u003c\/line\u003e\u003cg transform=\"translate(76 360) rotate(-90)\"\u003e\u003crect x=\"-38\" y=\"-13\" width=\"76\" height=\"20\" rx=\"4\" fill=\"#fff\"\u003e\u003c\/rect\u003e\u003ctext x=\"0\" y=\"2\" font-family=\"Arial\" font-size=\"16\" font-weight=\"700\" fill=\"#c2410c\" text-anchor=\"middle\"\u003e30 mm\u003c\/text\u003e\u003c\/g\u003e\u003cline x1=\"163\" y1=\"246\" x2=\"163\" y2=\"212\" stroke=\"#c2410c\" stroke-width=\"1\" stroke-dasharray=\"4 3\"\u003e\u003c\/line\u003e\u003cline x1=\"437\" y1=\"246\" x2=\"437\" y2=\"212\" stroke=\"#c2410c\" stroke-width=\"1\" stroke-dasharray=\"4 3\"\u003e\u003c\/line\u003e\u003cline x1=\"163\" y1=\"212\" x2=\"437\" y2=\"212\" stroke=\"#c2410c\" stroke-width=\"2\" marker-start=\"url(#ipd-15466397499771-a)\" marker-end=\"url(#ipd-15466397499771-a)\"\u003e\u003c\/line\u003e\u003crect x=\"262\" y=\"199\" width=\"76\" height=\"20\" rx=\"4\" fill=\"#fff\"\u003e\u003c\/rect\u003e\u003ctext x=\"300\" y=\"214\" font-family=\"Arial\" font-size=\"16\" font-weight=\"700\" fill=\"#c2410c\" text-anchor=\"middle\"\u003e36 mm\u003c\/text\u003e\u003ctext x=\"300\" y=\"370\" font-family=\"Arial\" font-size=\"15\" fill=\"#fff\" text-anchor=\"middle\"\u003esponge core\u003c\/text\u003e\u003cline x1=\"620\" y1=\"80\" x2=\"620\" y2=\"640\" stroke=\"#e5e7eb\" stroke-width=\"2\"\u003e\u003c\/line\u003e\u003ctext x=\"640\" y=\"110\" font-family=\"Arial\" font-size=\"13\" font-weight=\"700\" letter-spacing=\"2\" fill=\"#c2410c\"\u003eCROSS-SECTION\u003c\/text\u003e\u003ctext x=\"640\" y=\"142\" font-family=\"Arial\" font-size=\"22\" font-weight=\"700\" fill=\"#111\"\u003eWatertight Hatch Seal\u003c\/text\u003e\u003ctext x=\"640\" y=\"170\" font-family=\"Arial\" font-size=\"22\" font-weight=\"700\" fill=\"#111\"\u003e50mm x 30mm\u003c\/text\u003e\u003ctext x=\"640\" y=\"200\" font-family=\"Arial\" font-size=\"13\" fill=\"#6b7280\"\u003eSIZE\u003c\/text\u003e\u003ctext x=\"640\" y=\"221\" font-family=\"Arial\" font-size=\"17\" font-weight=\"700\" fill=\"#111\"\u003e50 × 30 mm\u003c\/text\u003e\u003ctext x=\"640\" y=\"250\" font-family=\"Arial\" font-size=\"13\" fill=\"#6b7280\"\u003eSKIN\u003c\/text\u003e\u003ctext x=\"640\" y=\"271\" font-family=\"Arial\" font-size=\"17\" font-weight=\"700\" fill=\"#111\"\u003eSolid EPDM, 67° Shore A\u003c\/text\u003e\u003ctext x=\"640\" y=\"300\" font-family=\"Arial\" font-size=\"13\" fill=\"#6b7280\"\u003eCORE\u003c\/text\u003e\u003ctext x=\"640\" y=\"321\" font-family=\"Arial\" font-size=\"17\" font-weight=\"700\" fill=\"#111\"\u003eClosed-cell EPDM sponge\u003c\/text\u003e\u003ctext x=\"640\" y=\"350\" font-family=\"Arial\" font-size=\"13\" fill=\"#6b7280\"\u003eCOLOUR\u003c\/text\u003e\u003ctext x=\"640\" y=\"371\" font-family=\"Arial\" font-size=\"17\" font-weight=\"700\" fill=\"#111\"\u003eBlack\u003c\/text\u003e\u003ctext x=\"640\" y=\"400\" font-family=\"Arial\" font-size=\"13\" fill=\"#6b7280\"\u003eSUPPLIED AS\u003c\/text\u003e\u003ctext x=\"640\" y=\"421\" font-family=\"Arial\" font-size=\"17\" font-weight=\"700\" fill=\"#111\"\u003e10m or 20m strip\u003c\/text\u003e\u003crect x=\"1\" y=\"1\" width=\"998\" height=\"56\" rx=\"18\" fill=\"#111\"\u003e\u003c\/rect\u003e\u003crect x=\"1\" y=\"38\" width=\"998\" height=\"19\" fill=\"#111\"\u003e\u003c\/rect\u003e\u003ctext x=\"30\" y=\"37\" font-family=\"Arial\" font-size=\"18\" font-weight=\"700\" fill=\"#fff\"\u003eINDUSTRIAL POLYMERS\u003c\/text\u003e\u003ctext x=\"970\" y=\"37\" font-family=\"Arial\" font-size=\"14\" fill=\"#d1d5db\" text-anchor=\"end\"\u003eWatertight Hatch Seal 50mm x 30mm · nominal dimensions in mm\u003c\/text\u003e\u003ctext x=\"30\" y=\"675\" font-family=\"Arial\" font-size=\"12\" fill=\"#6b7280\"\u003eCross-section enlarged for clarity, not to scale. 45° chamfers on the sealing face.\u003c\/text\u003e\u003c\/svg\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eRectangular with chamfered sealing face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e50mm wide x 30mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter skin\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM rubber, 67° Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore\u003c\/td\u003e\n\u003ctd\u003eClosed-cell EPDM sponge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin tensile strength\u003c\/td\u003e\n\u003ctd\u003e7.72 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSponge tensile strength\u003c\/td\u003e\n\u003ctd\u003e2.8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin elongation at break\u003c\/td\u003e\n\u003ctd\u003e360%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSponge elongation at break\u003c\/td\u003e\n\u003ctd\u003e140%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin compression set\u003c\/td\u003e\n\u003ctd\u003e25% (22 h at 70°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSponge compression deflection\u003c\/td\u003e\n\u003ctd\u003e12.1 kPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-40°C to +120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003eOne strip, 10m or 20m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\u003cp\u003eMeasure the full perimeter of the hatch channel and add about 10% for trimming and the joint. Example: a 900mm x 700mm hatch has a perimeter of 2 x (0.9 + 0.7) = 3.2m; with 10% that is about 3.5m, so a 10m strip seals two hatches of that size with spare. A 1.5m x 2m cargo cover needs about 7.7m, so one 10m strip covers it; for two such covers choose the 20m strip.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClean the retaining channel of old seal, adhesive and rust before fitting the new seal.\u003c\/li\u003e\n\u003cli\u003eFit the seal with the chamfered face towards the knife edge or coaming so it closes evenly.\u003c\/li\u003e\n\u003cli\u003eLay the seal into the channel without stretching it; a stretched seal shrinks back and opens gaps at the corners.\u003c\/li\u003e\n\u003cli\u003eStart the joint away from a corner and cut both ends square with a sharp blade for a tight butt joint; bond it with a suitable rubber adhesive.\u003c\/li\u003e\n\u003cli\u003eCheck the closed hatch with a chalk line or water test and adjust the dogs for even compression.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/watertight-hatch-seal-40mm-x-20mm-5m-to-25m-lengths\"\u003eWatertight Hatch Seal – 40mm x 20mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/watertight-hatch-seal-57mm-x-32mm-10m-length\"\u003eWatertight Hatch Seal – 57mm x 32mm – 10m Length\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/watertight-hatch-seal-70mm-x-40mm-10m-length\"\u003eWatertight Hatch Seal – 70mm x 40mm – 10m Length\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size channel does the 50mm x 30mm hatch seal fit?\u003c\/strong\u003e\u003cbr\u003eIt is 50mm wide and 30mm high, so it suits retaining channels around 50mm wide. Measure your existing seal or channel before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the marine door seal have two materials?\u003c\/strong\u003e\u003cbr\u003eThe closed-cell sponge core compresses to form the watertight barrier, while the solid EPDM skin protects the core from wear, tearing and weathering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the sponge core waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It is closed-cell, so the cells are sealed from each other and water cannot soak through the core.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used outdoors and at sea?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM has excellent resistance to ozone, UV and weathering, which suits exposed deck hatches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the chamfered corners matter?\u003c\/strong\u003e\u003cbr\u003eThey help the seal close evenly against the coaming and reduce snagging as the hatch opens and shuts, extending seal life.\u003c\/p\u003e\n\u003cp\u003eNeed help matching a hatch seal to your channel? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e with the channel width and closing gap and we will recommend the right size.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"10m","offer_id":56583560987003,"sku":"IP-HSEA-50X30-10","price":892.99,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56583561019771,"sku":"IP-HSEA-50X30-20","price":1785.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/watertight-hatch-seal-50mm-x-30mm-10m-or-20m-strip-studio.jpg?v=1794924810","url":"https:\/\/industrial-polymers.co.uk\/products\/watertight-hatch-seal-50mm-x-30mm-10m-or-20m-strip","provider":"Industrial-polymers ","version":"1.0","type":"link"}