Shower Enclosure Door Handle Knob Chrome - Length of 205mm

What this handle is

A stylish chrome-effect replacement handle and knob for shower enclosure doors, 205mm long and made for doors with 130mm between hole centres. It screws straight into the existing holes in your glass — simply unscrew the old handle and screw this one on, all within minutes.

The knob can be fitted on the inside face of the door, so the shower door opens easily from the inside as well as out. Two glass protection washers are included to cushion the fittings against the glass.

Specification

Why fit this handle

Instantly smartens a tired door. A corroded or broken handle lets the whole enclosure down — a fresh chrome-effect handle transforms it for the price of a spare part, not a new door.

Fits your existing holes. If your old handle sat on 130mm hole centres and the holes in the glass are at least 6mm across, this screws straight in — no drilling, no glazier.

Kind to the glass. The two included protection washers cushion the fittings against the glass as you tighten them.

Easy from the inside too. Fit the knob on the inside face and the door opens comfortably from within the shower.

Fitting in three steps

1. Measure. Check the distance between the centres of the two holes in your glass is 130mm, and that each hole is at least 6mm in diameter (the fixing bolts are 5.5mm).

2. Remove. Unscrew and lift away your old handle — no tools beyond a steady hand are usually needed.

3. Fit. Position the glass protection washers, offer up the new handle with the knob on the inside face, and screw it together until snug. Done in minutes.

Not sure it fits?

Email a photo of your old handle or your hole-centre measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right handle before you order — usually the same working day.