
T-Seal Carrier for 8-10mm Glass - Zero Gap - 800-2000mm
Brand: Industrial Polymers UK
What this carrier is
A clear T-seal carrier for shower and bath screens with 8–10mm glass. The rigid PVC U-section pushes onto the edge of the glass — no adhesive needed — and grips it securely, sitting tight to the glass with zero gap. Built into the channel is a groove that accepts a T-shaped seal, so you can slide in whichever of our T-seals suits your gap.
That makes it the answer where a standard one-piece seal won't work: fit the carrier to the glass once, then slot in — and later replace — the T-seal without ever taking the carrier off. It's commonly fitted along the bottom horizontal edge of a bath screen or shower door, and works just as well vertically between the glass and the tiles or wall.
Specification
| Fits glass thickness | 8mm – 10mm |
| Function | Carrier channel — accepts T-shaped seals slotted into its groove |
| Colour | Clear |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC |
| Fitting | Push-fit onto the glass — no adhesive, screws or tools required |
| Sold as | Single length |
| Glass type | Straight glass (contact us for our curved-seal service) |
| Cutting down | Easily trimmed to length at home |
Why fit this carrier
Seals where standard seals can't. When no off-the-shelf profile matches your gap, the carrier lets you pair 8–10mm glass with the T-seal that does — one channel, many sealing options.
Replace the wipe, not the whole seal. Once the carrier is on, a worn T-seal simply slides out and a new one slides in — the quickest possible refresh for years to come.
No adhesive, no mess. The channel grips the glass on its own and can be removed without leaving residue.
UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.
Fitting in three steps
1. Measure. Check your glass is 8–10mm thick and measure the edge you want to seal.
2. Choose. Pick the nearest length at or above your measurement — or use our custom cutting service — and choose the T-seal to suit your gap.
3. Fit. Trim to length if needed, push the carrier onto the edge of the glass, then slide your T-seal along the groove.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right carrier and T-seal before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements — just get in touch and we'll send you our simple measuring guide.
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a Quote
Fast, no-obligation price from our UK team for:T-Seal Carrier for 8-10mm Glass - Zero Gap - 800-2000mm
