Vertical Shower Screen Seal - Fits 8-10mm Glass - Fin Depth of 15mm
Brand: Industrial Polymers UK
What this seal is
A clear vertical shower screen seal for 8–10mm glass with a rigid 15mm fin. The rigid PVC U-channel — about 11mm tall, with an 8mm mouth widening to a 10mm base — pushes onto the edge of the glass with no adhesive, screws or drilling, and the fin spans the gap between the glass and the adjacent wall, tiles or fixed panel to stop water escaping.
Because the fin is rigid, this seal is normally used vertically on the upright edge of the glass, though it can be fitted horizontally as well. It is designed for straight glass only.
Choose your length
Available in 900mm, 1400mm, 2000mm or 2500mm lengths. Measure the edge of glass you need to seal and pick the nearest length at or above it — the seal trims down easily at home, or use our custom cutting service and it arrives ready to fit.
Specification
| Fits glass thickness | 8mm – 10mm |
| Profile | 11mm channel — 8mm mouth widening to 10mm base with gripping nibs — and a rigid 15mm fin in line with one channel wall |
| Fin depth | 15mm |
| Fin type | Rigid |
| Colour | Clear |
| Lengths available | 900mm, 1400mm, 2000mm or 2500mm — custom cutting service available |
| Material | Rigid PVC U-channel with rigid fin |
| Fitting | Push-fit — no adhesive, screws or tools required |
| Sold as | Single length |
| Glass type | Straight glass only |
| Cutting down | Easily trimmed to length at home |
Why fit this seal
Stops leaks at the side of the screen. A worn or missing vertical seal lets water escape between the glass and the wall every time you shower — replacing it takes minutes and protects flooring, skirting and plaster.
Keeps its shape. The rigid 15mm fin holds a consistent line against the wall or fixed panel, giving a neat, dependable seal along the full height of the glass.
No adhesive, no mess. The U-channel grips 8–10mm glass on its own, pushing straight on and coming off again without leaving residue.
UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.
Fitting in three steps
1. Measure. Check your glass is 8–10mm thick and measure the height of the upright edge you need to seal.
2. Choose. Pick the nearest length at or above your measurement — or add custom cutting.
3. Fit. Trim to length if needed, then push the channel onto the edge of the glass from one end and work your way along, so the fin faces the wall or fixed panel. Never slide the seal along the glass — this can damage it.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and length before you order — usually the same working day.
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a Quote
Fast, no-obligation price from our UK team for:Vertical Shower Screen Seal - Fits 8-10mm Glass - Fin Depth of 15mm