First Surface Double-Sided Acrylic Mirror Sheet 3mm - 2440mm x 1220mm

First surface acrylic mirror with reflection from both sides.

This 3mm double-sided acrylic mirror sheet carries an opaque aluminium mirror film protected by a durable clear coating, so both faces give a true reflection. It is a lightweight, shatter-resistant alternative to glass and is supplied as a full 2440mm x 1220mm sheet with a protective film on one side.

Specifications

• Material: extruded acrylic (PMMA) with aluminium mirror film and clear protective coating
• Thickness: 3mm (tolerance ±10%)
• Sheet size: 2440mm x 1220mm
• Finish: first surface mirror, reflective on both sides
• Standard sheets are supplied slightly oversized (-0mm/+70mm on length and width). If you need an exact 2440mm x 1220mm sheet, add a comment in the "notes" section at checkout and we will trim it for you.
• Protective film applied to one side to prevent scratching in transit and handling
• For interior use only

Benefits

• Reflective on both faces, so the sheet can be viewed from either side
• Around half the weight of glass mirror and far less likely to shatter
• Can be cut, drilled and machined with standard acrylic tooling
• Cut-to-size and custom shapes available on request

Use Cases

• Decorative mirrors and mirrored wall panels
• Art installations and sculptures
• Retail and exhibition displays viewed from multiple angles
• Theatre, film and event set design
• Lighting effects and infinity mirror builds

FAQ

Q: What does "first surface" mean?
A: The reflective layer sits on the face of the sheet rather than behind the acrylic, so there is no ghost image and the sheet reflects from both sides.

Q: Can I order a custom size?
A: Yes. Use the Request a Quote button or contact us with your dimensions and we will cut the sheet to size.

Q: Is it suitable for outdoor use?
A: No. This mirror is intended for interior applications only.

Q: Will the reflection be distorted?
A: Acrylic mirror is less rigid than glass, so mount it on a flat, fully supported backing to avoid distortion.

Q: How do I clean it?
A: Use a soft microfibre cloth with warm soapy water or a cleaner made for acrylic. Do not use solvents, ammonia or abrasive pads.