For Help or to Order over the Phone

+44 1282 277786

Free Shipping On All UK Orders

sales@industrial-polymers.co.uk

HDPE Sheet

21 products

Showing 1 - 21 of 21 products

HDPE Sheet cut to your exact thickness. HDPE is a tough, chemically resistant and food-safe workhorse sheet used for tanks, chopping surfaces and general fabrication, with a continuous service range of -50°C to +80°C, which makes this sheet and plate a dependable choice wherever those properties matter. Every piece is cut from stock we hold ourselves in the UK.

Cut to any thickness — no minimum order quantity
Also specified as PE500 (high density polyethylene)
Service temperature -50°C to +80°C
Same-day despatch on orders placed before 2pm
Trade accounts and volume pricing available

Related: HDPE

Cut-to-size and bulk pricing available on every line. Ordered before 2pm on a working day, UK stock items ship same day. Need a size that isn't listed? Contact our technical team and we will quote it.

Showing 1 - 21 of 21 products

Gloved hands lifting a blue PE500 HMWPE sheet over timber bearers, showing the planed face and square-cut edge

Blue PE500 HMWPE sheet panel angled on white, planed satin face and square-cut edge showing its thickness

Blue PE500 Sheet (HMWPE) 10–25mm | Cut to Size, Food Safe

From £1.00 inc VAT

Deep burgundy-brown PE500 slab angled on white, matt face and a thick square-sawn edge

Burgundy PE500 polyethylene sheet on a timber workbench with a router-cut wear strip and burgundy swarf beside it

Burgundy PE500 Sheet 12–25mm | Hard-Wearing Polyethylene

From £27.20 inc VAT

Black gloves tilting a green PE500 panel in a workshop, matt face and thin square edge, blue racking behind

Green PE500 slab angled on white, fine brushed grain across the face and a thick square-cut edge

Green PE500 Sheet 10–25mm | Hard-Wearing Polyethylene

From £24.32 inc VAT

Corner of a natural white HDPE sheet on a grey surface, square-cut edge showing the sheet thickness

White HDPE sheet on a workbench with a tape measure across it, pliers, saw and knife to one side

HDPE Natural Plastic Sheet – 1mm to 5mm | PE300 Grade | Food Safe, Low Friction & Chemical Resistant

From £17.60 inc VAT

Save £0.32 inc VAT

Thick white HDPE board on a stainless steel table in a commercial kitchen, mixer and bowls behind

Cream HDPE liner lining the V of a rusted steel hopper, bolted frame and discharge chute below

HDPE Natural Sheet Food Grade 1mm to 30mm Thickness in 10 Sizes

From £10.99 inc VAT £11.31 inc VAT

Gloved hands holding a natural white HDPE PE300 sheet in a workshop, square-cut edge visible

Chef in whites slicing peppers and cucumber on a thick white HDPE board in a stainless steel kitchen

HDPE Sheet High Density Polyethylene PE300 Food Safe in Multiple Sizes

From £6.42 inc VAT

Save £69.22 inc VAT

Fanned stack of white HDPE sheets on a workshop bench with a tape measure and craft knife

Stack of white HDPE sheets fanned on a bench in a bright factory, assembly line and staff behind

HDPE Sheet PE300 Natural & Black 2mm to 8mm for Food & Industrial Use

From £112.99 inc VAT £182.21 inc VAT

Black polyethylene slab angled on white, matt face and thick square-sawn edge

Thick black HDPE slab on a workshop bench with a machined black guide block cut from it, milling machine behind

High Density Polyethylene Black Sheet for Food Industry Applications 15mm to 60mm thick

From £36.24 inc VAT

Thin square black polyethylene sheet on white, soft highlight across the matt face

Thin black HDPE sheets fanned on a workbench with a cut strip and a steel rule under a strip light

High Density Polyethylene Black Sheet for Food Industry Applications 1mm to 12mm thick

From £2.96 inc VAT

Milky-white HDPE sheet resting on a black one against white, both square-cut edges facing out

Milky-white translucent HDPE square set at an angle on white, soft satin face and a neat sawn edge

High Density Polyethylene Natural (milky-white) / Black Sheet 1mm to 1.5mm thick for Piping & tanks

From £47.62 inc VAT

Three HDPE sheets stacked on white, translucent natural over black over milky-white, cut edges to front

Milky-white HDPE panel tipped towards the camera in grey knit gloves, dim workshop interior behind

High Density Polyethylene Natural (milky-white) / Black Sheet 2mm to 8mm thick for Liners & geocells

From £95.18 inc VAT

Thick white polyethylene sheet angled on a white background, square-cut edge showing its depth

Thick natural white HDPE slab on a workshop bench with a machined wear pad and two spacers cut from it, white swarf around

High Density Polyethylene Natural Sheet for Food Industry Applications 15mm to 60mm thick

From £36.24 inc VAT

Thin white polyethylene sheet lying flat on a plain white background, one corner slightly raised

Stack of thin natural white HDPE sheets on a workbench with a gasket cut from one and a craft knife on a cutting mat

High Density Polyethylene Natural Sheet for Food Industry Applications 1mm to 12mm thick

From £2.96 inc VAT

Black HDPE sheet stacked on a milky-white sheet, photographed at an angle on plain white

Milky-white HDPE square set flat on a white ground, soft satin top and a neatly sawn edge

High Density Polyethylene Sheet 10mm to 30mm for Cutting Boards & Wear Strips

From £475.92 inc VAT

Grey-gloved hands holding a milky white HDPE offcut edge-on, racked stock and pallets in the yard behind

Off-white HDPE sheet lying flat at an angle on a white studio background, slim square-cut edge to the front

High Density Polyethylene Sheet 2mm to 8mm Thickness for Machining & Fabrication

From £95.18 inc VAT

Two thin white HDPE sheets held together in knit gloves, palletised stock in the warehouse behind

Thin white HDPE sheet angled flat on a plain white background, one crisp square edge showing its depth

High-Density Polyethylene Sheet in 1mm and 1.5mm Thickness for Fabrication

From £47.62 inc VAT

Small milky white HDPE sheet angled on a grey backdrop, two clean-cut edges meeting at the near corner

Milky white HDPE sheet lying flat on a steel workbench, hand tools and swarf around it

Milky White Plastic HDPE - PE300 Sheet - 2000mm x 1000mm

From £488.00 inc VAT

Grey knit gloves tilting a bright white HDPE panel in a workshop, concrete floor and pale doorway behind

Square translucent milky-white HDPE slab angled on white, satin face and a clean square-cut edge

Natural HDPE Sheet 1–60mm | Impact-Resistant Polyethylene

From £10.54 inc VAT

Knit-gloved hands holding a thick milky white polyethylene slab on site, concrete formwork behind

Long white polyethylene sheet angled on a plain white background, thin square edge along its length

Polyethylene Sheet - Thickness Options from 10mm to 30mm

From £475.92 inc VAT

Red PE500 sheet held level in gloved hands, faint brushed grain across the face, pale workshop behind

Square red PE500 slab angled on white, satin face and a clean square-cut edge along the front

Red PE500 Sheet 10–25mm | Hard-Wearing Polyethylene

From £24.32 inc VAT

Yellow PE500 sheet tilted in black-gloved hands, smooth matt face, blurred grey workshop behind

Golden-yellow PE500 slab set corner-on against white, thick square edge catching the light

Yellow PE500 Sheet 10–25mm | Hard-Wearing Polyethylene

From £24.32 inc VAT

Over 1,000 products

Plastics, seals, matting & more

Trade & bulk orders

Volume quotes available on request

Easy returns

See our returns policy for details

All major cards accepted

Credit & debit cards welcome