Black Bifold Shower Seal - 4mm T-Head, 14mm Tall, Seals 9-14mm Gaps

What this seal is

A black replacement channel seal for bifold and channel-fitting shower doors with black frames. The slim 4mm T-head slots straight into the aluminium or plastic channel in the door frame — no adhesive required — and the flexible 14mm-tall blade beneath closes gaps of 9–14mm, keeping the water where it belongs.

Fit it horizontally under the bottom rail of the door, or vertically on the upright. Made from soft flexible PVC, it cuts cleanly to length with ordinary scissors.

Choose your length

Available in 1000mm or 2000mm lengths. Pick the nearest length at or above the width of your door and trim it down at home, or add the Custom Cut option and it arrives ready to fit. If in doubt, go longer — it’s easy to trim, impossible to stretch.

Specification

Why fit this seal

Stops leaks under the door. A hardened, split or missing channel seal is the usual reason water creeps out under a bifold door — a fresh blade closes the gap and protects flooring and skirting.

Matches a black frame. Made in black specifically for black-framed enclosures, so the replacement blends in instead of standing out.

No adhesive, no mess. The T-head simply slides along the existing channel — no glue, no residue, and it can be replaced again just as easily.

UK stock, fast dispatch. Held in stock in the UK and dispatched same working day when ordered before 2pm.

Fitting in three steps

1. Measure. Check the channel slot in your door takes a 4mm T-head, measure the width of the door, and confirm the gap to seal is 9–14mm.

2. Choose. Pick 1000mm or 2000mm — whichever is at or above your door width — or add the Custom Cut option.

3. Fit. Slide the old seal out and clean the channel, cut the new seal to the door’s width with scissors, then feed the T-head in at one end and slide it across until seated.

Not sure it fits?

This is the middle height of our three black 4mm T-head seals, so it’s worth checking before you buy. Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.