
Shower Seals & Spares
Chrome Shower Screen Seal - 4-6mm Glass, Seals 18-23mm Gaps
Price shown updates with the option you pick.
What this seal is
A chrome-effect replacement seal for shower and bath screens with 4–6mm glass. The rigid PVC U-section pushes straight onto the edge of the glass — no adhesive required — and the straight fin closes gaps of 18mm to 23mm, stopping water escaping onto your bathroom floor every time you shower.
This profile is most often fitted along the bottom horizontal edge of a bath screen or shower door, and it works just as well vertically on the upright of the glass to seal against the wall or tiles.
Specification
| Fits glass thickness | 4mm, 5mm or 6mm |
| Gap range covered | 18mm – 23mm |
| Colour | Chrome |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC U-section, chrome-effect finish |
| Fitting | Push-fit — no adhesive required |
| Position | Bottom of the screen, or vertical against the wall or tiles |
| Sold as | Single length |
| Glass type | Straight glass (contact us for our curved-seal service) |
| Cutting down | Easily cut down to size at home |
Why fit this seal
Matches your chrome frame. The chrome-effect finish blends seamlessly with a chrome-framed enclosure — and unlike a clear seal, it will not discolour over time.
Stops leaks and protects your bathroom. A worn or missing seal is the most common cause of water pooling outside the shower; replacing it takes minutes and protects flooring, skirting and plaster.
No adhesive, no mess. The U-section grips 4–6mm glass on its own, so it pushes straight on and comes off cleanly whenever it needs replacing.
Cut to fit at home. Order the next length up and trim it down for a perfect fit, or use our custom cutting service and it arrives ready to fit.
Fitting in three steps
1. Measure. Check your glass is 4–6mm thick, measure the edge you are sealing, and measure the gap you need to close (18–23mm).
2. Choose. Pick the nearest length at or above your measurement — 800mm, 900mm, 1400mm or 2000mm.
3. Fit. Trim to length if needed, then push the seal onto the glass from below at one end and work your way along, pushing it up onto the glass as you go — do not slide the seal along the glass, as this can damage it. No tools, no adhesive.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day. Got curved glass? We may be able to curve this or a similar seal to your measurements — just get in touch and we'll send you our simple measuring guide.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Chrome Shower Screen Seal - 4-6mm Glass, Seals 18-23mm Gaps
