
Shower Seals & Spares
Chrome Shower Screen Seal - 8-10mm Glass, Seals 11-16mm Gaps
Price shown updates with the option you pick.
What this seal is
A chrome-effect shower screen seal for doors and bath screens with 8–10mm glass. The rigid PVC channel pushes straight onto the edge of the glass — no adhesive, no screws, no drilling — and the blade beneath closes gaps of 11mm to 16mm between the glass and the tray, tiles or wall.
It is most commonly fitted horizontally along the bottom of a bath screen or shower door, and works just as well vertically on the upright edge to seal between the glass and the wall. The chrome finish blends in with a chrome-framed enclosure and will not discolour like a clear seal can.
Choose your length
Four lengths are available — 800mm, 900mm, 1400mm and 2000mm. Pick the length at or just above your glass edge; the seal trims down easily at home, or add our custom cutting service and it arrives ready to fit.
Specification
| Fits glass thickness | 8mm, 9mm or 10mm |
| Seals gaps of | 11mm – 16mm |
| Colour | Chrome |
| Material | Rigid PVC U-section |
| Fitting | Push-fit onto the glass edge — no adhesive required |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Glass type | Straight glass only |
| Cutting down | Easily trimmed to length at home |
Why fit this seal
Stops leaks and protects floors. A worn or missing bottom seal is the most common cause of water pooling outside the shower — replacing it takes minutes and protects flooring and skirting from water damage.
Matches your chrome frame. The chrome finish sits seamlessly alongside chrome-framed enclosures — and unlike clear PVC it will not discolour over time.
No adhesive, no mess. The channel grips 8–10mm glass on its own — it slides straight on and can be removed without leaving residue.
Cut to fit at home. Order the next length up and trim it down for a perfect edge-to-edge fit, or use our custom cutting service and it arrives ready to fit.
Fitting in three steps
1. Measure. Check your glass is 8–10mm thick and measure the gap you need to close — this seal covers 11–16mm.
2. Choose. Pick the nearest length at or above your glass edge — 800mm, 900mm, 1400mm or 2000mm.
3. Fit. Trim to length if needed, then push the channel onto the edge of the glass so the blade closes the gap. No adhesive, no drying time.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Chrome Shower Screen Seal - 8-10mm Glass, Seals 11-16mm Gaps
