White Magnetic Shower Door Seals - 8mm T, Spans 24mm - 1 Pair

What this seal is

A pair of white magnetic channel seals for shower doors, sold as two 2000mm lengths. Each seal is made from soft, durable PVC with a magnetic strip encased in white plastic to match the rest of your enclosure. The 8mm-wide T-section slots into the channel on the door — no adhesive needed.

Fitted vertically on the closing edges of the door — usually on quadrant enclosures, though some bath screens and other doors use them too — the two magnetic faces pull together to hold the door firmly shut while you shower, yet release easily when you push the door open. Used together as a pair they will span a maximum gap of 24mm; if pairing one with a different seal, check the full dimensions on the technical drawing in the gallery.

Specification

Why fit this seal

Holds the door properly shut. Tired magnets are why shower doors drift open mid-shower and let water onto the floor — a fresh magnetic pair pulls the door closed and keeps it there.

Easy in, easy out. The magnets are strong enough to hold the door shut while showering, but still release easily once you're finished.

No-mess fitting. The T-section slides into your existing channel — no adhesive, no residue, and it can be replaced again in minutes.

UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.

Fitting in three steps

1. Measure. Check the minimum width of your channel (the T-section needs around 8mm) and measure the height of the door edges.

2. Choose. Order the 2000mm pair and trim at home with scissors, or use our custom cutting service.

3. Fit. Slide the old seals out, clean any dirt or grime from the channels, then slide each new seal along its channel so the magnetic faces meet when the door closes.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.