White Magnetic Shower Seals - 8mm T-Head, Profile 2 - 1 Pair

What these seals are

A pair of white magnetic channel seals that hold your shower door closed while you shower. Each seal is made from durable, flexible soft PVC with a magnetic strip encased in white plastic to match the rest of a white enclosure — the two magnets pull the door shut firmly, yet the door still opens easily when you are finished.

Each seal has an 8mm wide T-piece that slots into the channel on the door and frame — no adhesive needed. It fits an 8mm wide channel and may also work in a channel that measures slightly less; measure the minimum width of your channel to check.

Specification

Why fit these seals

Keeps the door shut while you shower. The magnetic strips pull the closing edges together so the door cannot drift open and let water onto the bathroom floor.

Matches a white enclosure. The magnet is fully encased in white plastic, so the seals blend in with white-framed doors rather than standing out.

No adhesive, no mess. The 8mm T-piece slides into the existing channel and comes out just as easily when the seals next need replacing.

Cut to fit at home. The soft PVC trims cleanly with scissors, so the 2000mm pair can be cut down to suit your door height exactly.

Fitting in three steps

1. Measure. Check the minimum width of your channel accepts an 8mm T-piece, and measure the height of the closing edge.

2. Choose. Cut each 2000mm length down to your measurement, or use our custom cutting service.

3. Fit. Remove the old seals from the channels, clean out any dirt or grime, then slide each new seal along the length of its channel so the magnetic faces meet when the door closes.

Not sure they fit?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile before you order — usually the same working day.