Black Self-Adhesive Magnetic Shower Seals - 1 Pair, 2000mm

What this seal is

A pair of black magnetic seals with high-quality 3M VHB double-sided tape pre-applied to the back of each magnet. Stick one strip to each side of the opening — glass, tiles or any other suitable flat surface — and the magnets pull together to close the gap and hold the door shut while you shower.

Because they are self-adhesive rather than channel-fitted, these seals can be used anywhere they can be suitably stuck to a flat surface — ideal for replacing a lost or damaged magnetic closure, or adding one where your enclosure never had one.

Specification

Why fit this seal

Holds the door shut and keeps water in. The magnetic strips pull the door closed against its frame every time, sealing the gap while you shower yet releasing easily when you're finished.

No drilling, no channels. The pre-applied 3M VHB tape bonds straight to clean glass or tiles — there's nothing to screw, slot or glue, so fitting takes minutes.

Fits almost any enclosure. Because it sticks to any suitable flat surface, this pair works where channel-fitted seals can't — and the 2000mm lengths trim down easily to your door height.

UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.

Fitting in three steps

1. Measure. Measure the height of the opening and check both fixing surfaces are flat and suitable for the tape.

2. Choose. Cut both 2000mm strips to length with garden secateurs or a junior hacksaw, or use our custom cutting service and they arrive ready to fit.

3. Fit. Clean and dry both surfaces, peel the backing from the 3M tape and press each strip firmly into place, checking the two magnets line up so they meet cleanly when the door closes.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right seal before you order — usually the same working day.