White Magnetic Shower Seals - 13mm T-Head - 1 Pair, 2m

What these seals are

A pair of white magnetic channel seals for shower doors. Each seal has a 13mm-wide T-piece that slots into the channel in your door frame — it suits a 13mm-wide channel and may also work in channels measuring slightly less — and a magnetic strip covered in white plastic to match the rest of your enclosure.

When the door closes, the two magnetic strips pull together and hold it shut while you shower, yet still release easily when you’re finished. The soft PVC is durable, flexible and easy to work with.

Specification

Why fit these seals

Holds the door properly shut. The magnetic strips snap the doors together as they close, keeping the enclosure sealed while you shower instead of drifting open and letting water onto the floor.

Blends in with a white enclosure. The seal body and the plastic covering the magnet are both white, so replacements match white-framed enclosures neatly.

No adhesive, no mess. The T-piece slides into the channel your old seal came out of — no glue, no drilling, and it slides out again when next due a change.

Easy to cut at home. The soft PVC trims cleanly with scissors, so cutting the 2000mm pair down to your door height takes moments — or use our custom cutting service and they arrive ready to fit.

Fitting in three steps

1. Measure. Measure the minimum width of the channel in your door frame — it should be around 13mm — and the height of each door edge.

2. Choose. The pair comes in 2000mm lengths; select a Custom Cut option if you’d like them trimmed to your exact size before dispatch.

3. Fit. Remove the old seal from the channel, clean the channel to remove any dirt and grime, cut the new seals to length, then slide each one along the channel so the magnetic faces meet when the door closes.

Not sure they fit?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.