Black Magnetic Shower Seals - 7mm T-Head - 1 Pair, 2m

What this seal is

A pair of black magnetic channel seals that hold your shower door closed while you shower. Each seal has a 7mm-wide T-head that slots into the channel on the door and frame — it suits a 7mm channel and may also work in one slightly narrower — and a magnetic strip encased in white plastic to match the rest of your enclosure.

When the door swings shut, the two magnetic strips meet and pull together, keeping the door firmly closed and watertight, yet still easy to open when you're finished. Made from soft, durable PVC, both lengths cut easily with a good pair of scissors.

Specification

Why fit this seal

Keeps the door shut and sealed. Worn magnetic seals let the door drift open mid-shower and leak along the closing edge. A fresh magnetic pair pulls the door closed and holds it there.

No-mess fitting. Both seals slide into the existing channels on the door and frame — no adhesive, no tools beyond scissors.

Sold as a proper pair. You get both sides of the magnetic closure in matching 2000mm lengths, so the strips line up and pull together as intended.

UK stock, fast dispatch. Held in stock in the UK and dispatched the same working day when you order before 2pm.

Fitting in three steps

1. Measure. Check the minimum width of your channels — the 7mm T-head needs a channel of around 7mm — and measure the height of the door edge.

2. Choose. The pair comes in 2000mm lengths; cut down at home or use our custom cutting service.

3. Fit. Remove the old seals, clean any dirt or grime from the channels, then slide each new seal along the length of its channel so the two magnetic faces meet when the door closes.

Not sure it fits?

Email a photo of your old seal's end profile or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile before you order — usually the same working day.