White Magnetic Shower Door Seals - 8mm T-Head - 1 Pair, 2000mm

What this seal is

A pair of white magnetic channel seals for shower doors. Each seal is made from soft, durable PVC with an 8mm-wide T-head that slots into the channel on your door frame, and carries a magnetic strip covered in white plastic to match the rest of your enclosure.

Fitted to the meeting edges of the door, the two magnetic strips pull together to hold the door firmly shut while you shower — yet it still opens easily when you're finished.

Will it fit my channel?

The T-head measures 8mm wide, so it fits an 8mm-wide channel and may also work in a channel that measures slightly less. Measure the minimum width of your channel to check before ordering — and if in doubt, email us a photo.

Specification

Why fit this seal

Holds the door shut. Tired magnets and perished seals let the door drift open mid-shower — a fresh magnetic pair pulls it closed and keeps the water where it belongs.

No adhesive, no mess. The T-heads slot into your existing channels, so fitting and any future replacement are clean and simple.

Matches your enclosure. The white plastic covering blends with white frames and profiles for a tidy, factory-fitted look.

Cuts with scissors. The soft PVC trims down to your door height in seconds — no saws or specialist tools.

Fitting in three steps

1. Measure. Check the minimum width of your channel (the T-head is 8mm) and the height of the door edges.

2. Choose. Order the 2000mm pair and trim at home, or add our custom cutting service.

3. Fit. Slide the old seals out, clean the channels to remove any dirt or grime, then slide each new seal along the length of its channel so the magnetic faces meet when the door closes.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile before you order — usually the same working day.