Magnetic Shower Seals - 10-12mm Glass, 90 or Straight

What these seals are

A pair of clear magnetic closing seals for heavyweight frameless doors with 10–12mm glass. Each rigid PVC U-section pushes onto the edge of the glass and grips on its own — no adhesive needed — and the magnetic strip, covered in black plastic, pulls the doors together and holds them shut while you shower, yet still releases easily when you’re finished.

These seals are fitted vertically, usually on quadrant enclosures, though some bath screens and other doors use them too. They can be used at either 90° or 180°, as shown in the main product image.

Will they suit my door?

On sliding doors, these seals are suitable as long as the gap between the doors is no greater than 20mm when closed. On hinged or pivoting doors the gap needs to be exactly 20mm — otherwise the two magnetic strips won’t quite line up and the seals may not close as intended. Measure the closed gap before you order.

Specification

Why fit these seals

Holds the door properly shut. The magnetic strips snap the doors together as they close, keeping the enclosure sealed while you shower instead of drifting open and letting water onto the floor.

Made for thick glass. The U-section is sized for 10–12mm panels, so it grips heavyweight frameless doors that thinner-glass seals simply fall off.

No adhesive, no mess. Each seal pushes straight onto the door edge and can be removed again without leaving residue on the glass.

Corner or in-line. The same pair works on doors meeting at 90° or in line at 180°, so one product covers quadrants and flat-fronted enclosures alike.

Fitting in three steps

1. Measure. Check your glass is 10–12mm thick, measure the height of each door edge, and measure the gap between the doors when closed.

2. Choose. The pair comes in 2000mm lengths — select a Custom Cut option if you’d like them trimmed to your exact size before dispatch.

3. Fit. Trim to length if needed, then push one seal onto each door edge so the magnetic strips face each other and meet squarely when the door closes.

Not sure they fit?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.