
Shower Seals & Spares
Magnetic Shower Seals - 8-10mm Glass, 135 or 180, Spans 25mm
Price shown updates with the option you pick.
What this seal is
A pair of clear magnetic seals for shower doors with 8mm, 9mm or 10mm glass. Each rigid PVC channel pushes onto the vertical edge of the glass — no adhesive needed — and the two magnetic strips, covered in white plastic to match your enclosure, pull together to hold the doors firmly shut while you shower yet open easily afterwards.
The pair closes at either 135° or 180°, which makes them the usual choice on quadrant enclosures, though some bath screens and other doors use them too.
Will they suit my doors?
On sliding doors, these seals should be suitable as long as the gap between the panels is no greater than 25mm when the doors are closed. On hinged or pivoting doors, the gap needs to be exactly 25mm — otherwise the two magnetic strips won't quite line up and the seals may not close as intended.
Specification
| Fits glass thickness | 8mm, 9mm or 10mm |
| Closing angles | 135° or 180° |
| Colour | Clear, with the magnetic strip covered in white plastic |
| Sold as | Pair |
| Lengths available | 2000mm or 2500mm — custom cutting service available |
| Material | Rigid PVC channel with magnetic strip |
| Fitting | Push-fit — no adhesive required |
| Position | Vertical, usually on quadrant enclosures |
| Cutting down | Can be cut to the length you require at home |
Why fit this seal
A positive, watertight close. The paired magnets pull the doors together every time, so they can't drift apart mid-shower and let water onto the floor.
No adhesive, no mess. Each channel grips 8–10mm glass on its own — the seals push straight on and come off again without residue.
Blends in. The white plastic covering over the magnets matches typical enclosure frames, so the new seals look factory-fitted.
Cut to fit at home. Choose 2000mm or 2500mm and trim down to your door height, or use our custom cutting service.
Fitting in three steps
1. Measure. Check your glass is 8–10mm thick, your doors meet at 135° or 180°, and your closed gap suits the 25mm guidance above.
2. Choose. Pick the 2000mm or 2500mm pair, whichever is at or above your door height.
3. Fit. Trim to length if needed, then push each channel onto a door edge with the magnetic strips facing so they meet when the doors close.
Not sure it fits?
Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and length before you order — usually the same working day.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Magnetic Shower Seals - 8-10mm Glass, 135 or 180, Spans 25mm
