Magnetic Shower Seals - 4-6mm Glass, 90 Degree - 1 Pair

What this seal is

A pair of clear magnetic seals for shower doors with 4–6mm glass. Each rigid PVC U-section pushes onto the edge of the glass — no adhesive needed — and carries a magnetic strip covered in white plastic to match the rest of your enclosure.

Fitted to the meeting edges of your door, the two magnetic strips pull together to hold the door firmly shut while you shower, sealing the closing edge against drips — yet the door still opens easily when you're finished.

Specification

Why fit this seal

Holds the door shut. The magnetic strips pull the door closed and keep it there while you shower — no more drips escaping through a door that drifts open.

No adhesive, no mess. Each channel grips 4–6mm glass on its own, pushing straight onto the edge and coming off cleanly if you ever need to replace it.

Matches your enclosure. The white plastic covering over the magnet blends with the rest of your enclosure, while the clear channel disappears against the glass.

Cut to fit at home. The 2000mm lengths trim down to your door height, or use our custom cutting service and they arrive ready to fit.

Fitting in three steps

1. Measure. Check your glass is 4–6mm thick and measure the height of the two meeting edges.

2. Choose. Order the 2000mm pair and trim at home, or add our custom cutting service.

3. Fit. Push one channel onto each meeting edge so the magnetic faces line up when the door closes. No tools, no adhesive, no drying time.

Not sure it fits?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.