Magnetic Shower Seals - 4-6mm Glass, 180 Degree - 1 Pair

What this seal is

A pair of clear magnetic closing seals for shower doors with 4–6mm glass. Each rigid PVC channel pushes straight onto the edge of the glass — no adhesive needed — and carries a magnetic strip encased in white plastic to match the rest of your enclosure.

Fitted to the meeting edges of the door and the fixed panel (or second door), the two magnets pull together to hold the door firmly shut while you shower, yet release easily when you push the door open.

Specification

Why fit this seal

Holds the door properly shut. The magnetic strips pull the door closed along its full height, stopping it drifting open mid-shower and letting water escape.

Easy to open, easy to live with. The magnets grip firmly while you shower but release with a gentle push — no latches, no catches.

No adhesive, no mess. Each channel grips 4–6mm glass on its own — the seals slide straight on and can be removed without leaving residue.

Complete replacement pair. Worn magnetic seals stop meeting cleanly and leak at the closing edge — fitting a fresh matched pair restores a crisp magnetic close in minutes.

Fitting in three steps

1. Measure. Check your glass is 4–6mm thick and measure the height of the two meeting edges.

2. Choose. The pair comes in 2000mm lengths — trim at home, or add our custom cutting service and they arrive ready to fit.

3. Fit. Push one channel onto each meeting edge so the two magnetic faces line up when the door closes. No adhesive, no drying time.

Not sure it fits?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile before you order — usually the same working day.