Magnetic Shower Seals - 4-6mm Glass, Spans 22mm - 1 Pair

What this seal is

A pair of clear magnetic shower screen seals for 4–6mm glass. Each rigid PVC U-channel pushes onto the meeting edge of the glass with no adhesive, and the built-in magnetic strips — covered in white plastic to match the rest of your enclosure — pull the doors together and hold them shut while you shower, yet still open easily when you're finished.

These seals fit vertically at 180°, usually on quadrant enclosures, though some bath screens and other doors use them too. Sold as a pair in 2000mm lengths and easily cut down to size once received.

Will they suit your door gap?

With sliding doors, these seals are suitable as long as your gap is no greater than 22mm when the doors are closed. With hinged or pivoting doors, the gap needs to be exactly 22mm — otherwise the two magnetic strips won't quite line up and the seals may not close as intended.

Specification

Why fit this seal

Holds the door properly shut. Fresh magnets pull the doors together with a positive close, stopping water escaping at the meeting edge every time you shower.

Stops leaks, protects floors. A full-height seal on each closing edge keeps water inside the enclosure and off your flooring and skirting.

No adhesive, no mess. The channels grip 4–6mm glass on their own — they slide straight on and come off without leaving residue.

UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.

Fitting in three steps

1. Measure. Check your glass is 4–6mm thick, measure the height of each meeting edge, and check your closed-door gap against the guidance above.

2. Choose. The pair comes in 2000mm lengths — cut down at home or use our custom cutting service.

3. Fit. Trim to height if needed, then push one channel onto each vertical meeting edge so the magnetic strips line up and pull together as the door closes.

Not sure it fits?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.