Single Magnetic Shower Seal for 5-6mm Glass - 90 Degree, 2000mm

What this seal is

A clear magnetic seal for hinged shower doors with 5mm or 6mm glass. The rigid PVC channel pushes onto the vertical edge of the glass — no adhesive needed — and the built-in magnetic strip closes at 90° against your existing magnetic door frame, holding the door firmly shut while you shower yet opening easily when you're done.

This seal is sold as a single 2000mm length, designed to pair with the magnetic frame your enclosure already has. It's the usual arrangement on hinged door enclosures; if you have sliding doors, or a different style of magnetic seal fitted at present, this profile won't be suitable — check yours before ordering.

Specification

Why fit this seal

A positive, watertight close. The magnet pulls the door snug against the frame every time, so the door can't drift open mid-shower and let water escape.

No adhesive, no mess. The channel grips 5–6mm glass on its own — it pushes straight on and comes off again without residue.

A straightforward replacement. When an old magnetic seal discolours or loses its grip, swapping in a new one takes minutes and makes the whole enclosure feel new.

Cut to fit at home. The 2000mm length trims down easily to your door height, or use our custom cutting service.

Fitting in three steps

1. Measure. Check your glass is 5mm or 6mm thick, and that your door closes at 90° against a magnetic frame.

2. Choose. Order the 2000mm length to trim yourself, or have us cut it to your exact door height.

3. Fit. Push the channel onto the vertical edge of the glass with the magnetic strip facing the door frame — no tools, no adhesive.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile before you order — usually the same working day.