
Shower Seals & Spares
Magnetic Seal Set - 6-8mm Glass, 3-Piece Offset Set, 2m
Price shown updates with the option you pick.
What this seal set is
A magnetic closing-seal set for shower enclosures with 6–8mm glass, sold as a set of three profiles: 1 x over glass magnet, 1 x offset fin with magnet channel and 1 x tee magnet, each in a 2000mm length. The rigid PVC U-channels push straight onto the glass with no need for any additional adhesive.
The magnets come together at 180° and offset, and the magnetic strips are covered in white plastic to match the rest of your enclosure. They hold the door firmly shut while you shower, yet still open easily when you are finished. The set is fitted vertically, on enclosures that use one over-glass magnet, one offset fin with a magnet channel and a tee magnet.
Specification
| Fits glass thickness | 6mm, 7mm or 8mm |
| Colour | Clear with white magnets |
| Set contents | 1 x Over Glass Magnet, 1 x Offset Fin with Magnet Channel, 1 x Tee Magnet |
| Closing angle | Magnets meet at 180° and offset |
| Length | 2000mm (each profile) — custom cutting service available |
| Position | Fitted vertically |
| Material | Rigid PVC U-section with plastic-covered magnetic strip |
| Fitting | Push-fit — no adhesive required |
| Sold as | Set of three 2000mm lengths |
| Cutting down | Can be cut to length once received |
Why fit this seal set
Keeps the door shut and the water in. Tired magnetic seals stop pulling the door fully closed, leaving a leaking gap down the full height of the enclosure. A fresh set snaps the door shut every time.
Complete replacement in one order. All three profiles — over-glass magnet, offset fin with magnet channel and tee magnet — arrive together, so the whole closing edge is renewed in one go.
No adhesive, no mess. The U-channels grip 6–8mm glass on their own and the white-covered magnetic strips blend in with the enclosure.
UK stock, fast dispatch. Order before 2pm and it is dispatched the same working day from UK stock.
Fitting in three steps
1. Measure. Check your glass is 6–8mm thick, measure the height of the door edges and compare your old seals with the three profiles pictured.
2. Choose. Order the 2000mm set — or add the custom cutting service and it arrives ready to fit.
3. Fit. Trim each profile to height if needed, then push the channels onto the door and panel edges so the magnetic faces meet when the door closes. No tools, no adhesive, no drying time.
Not sure it fits?
Email a photo of your old seals — end-on shots are ideal — or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profiles before you order — usually the same working day.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Magnetic Seal Set - 6-8mm Glass, 3-Piece Offset Set, 2m
