Magnetic Shower Seals - 8-10mm Glass, 180 Degree, Spans 20mm

What this seal is

A pair of clear magnetic closing seals for 8–10mm glass shower doors. Each rigid PVC U-section pushes straight onto the edge of the glass with no adhesive, and carries a black magnetic strip set into the clear PVC. When the door closes, the two strips pull together to hold it firmly shut while you shower — yet it still opens easily when you're finished.

These seals are fitted vertically on the closing edges of the two panels. They are designed to meet inline at 180°, as shown in the product images.

Which door types suit this seal?

Closed as a pair, the two channels meet to span a gap of about 20mm between the glass edges — this is the dimension marked on the profile drawing below. Measure the gap between your panels with the door shut and compare it against that drawing before ordering.

If your gap is noticeably larger or smaller, don't guess: send us the measurement and we will match you to the right profile from the range. We stock the same family in 90°, 135° and wider spans.

Specification

Why fit this seal

Holds the door shut. The magnetic strips pull the door closed and keep it there while you shower, stopping it drifting open and letting water onto the floor.

Still easy to open. The magnets are strong enough to seal but release easily when you push the door — no latches or catches to fiddle with.

No adhesive, no mess. Each channel grips 8–10mm glass on its own — the pair slides straight on and can be removed without leaving residue.

Blends in. The clear PVC blends into a typical enclosure, so the replacement looks like it came with the door.

Fitting in three steps

1. Measure. Check your glass is 8–10mm thick, measure the height of the door edges, and measure the gap between the two panels when closed.

2. Choose. Pick the 2000mm or 2500mm pair — whichever is at or above your door height. Order a 25mm sample first if you want to check the profile in your hand.

3. Fit. Trim both seals to length if needed, then push one channel onto each door edge so the magnetic faces meet when the door closes. No tools, no adhesive, no drying time.

Not sure it fits?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and length before you order — usually the same working day.